• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.181-184
• /
• 2005

In this paper, we have improved a novel fast response time liquid crystal operating mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (${\Delta}n$>0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the high tilted OCB(HTOCB) mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1188-1192
• /
• 2004

Polyamic acid precursors were prepared by mixing various main chain dianhydrides, main chain diamines and side chain diamines. Copolyimide films with alkylcyclohexylbenzene as a side chain were prepared by thermal imidization of polyamic acid precursors. Pretilt angles on rubbed polyimides changed according to the side chain and main chain structures of the polyimide. Consequently, we found that LC pretilt angles of polyimide films with a liquid crystal structure as a side chain showed to be approximately 90$^{\circ}$ when a linear and rigid polyimide main chain and a side chain of suitable length were employed.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.6
• /
• pp.243-246
• /
• 2008

We have studied the liquid crystal (LC) alignment, the pretilt angle generation, and the annealing behavior for a nematic liquid crystal (NLC) on the homogeneous polyimide (PI) surfaces by using the rubbing method and the ion beam (IB) method. An excellent LC alignment of the NLC on the PI surface with rubbing and IB irradiation were observed. The pretilt angle of NLC on the homogeneous PI surface for the rubbing method is decreased from $4.5^{\circ}$ to $3.5^{\circ}$ as rubbing time is increased, that of the for the IB irradiation method is decreased from $0.5^{\circ}$ to $0.1^{\circ}$ as the time of IB irradiation is increased. After the annealing, the pretilt angles of the rubbed PI surfaces increased up to $4^{\circ}$, these of the IB irradiated PI surfaces little increased. It is considered the side chain of the rubbed PI show the its abilities of the original capacities, while the side chain of the IB irradiated PI cannot show the its abilities of the original capacities due to the IB has already destroyed the side chain of the PI.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.36-40
• /
• 2002

The polar anchoring strength and surface ordering in a NLC,4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1603-1605
• /
• 1996

We have studied the static electricity and optical retardation generated by rubbing the surfaces of polyimide (PI) and polyamide (PA) films. The static electricity increases with the rubbing strength (RS) and varies with the different PI films. We also investigated how the differences in the rubbing fabric affects the magnitude of the induced static electricity; the order of this effect is nylon > rayon > cotton. The induced static electricity is not only directly related to the values of the specific resistivity of the rubbed PI films, but also the RS and the ability of the rubbing fabric to generate and add a static electric charge. The order of the optical retardation produced by the rubbing fabraic on rubbed PI films is nylon > rayon > cotton, coinciding with the order of the generated static electricity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer duribg UV irradation time of 60min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer during UV irradation time of 60min.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.484-492
• /
• 2003

How the characteristics and stability of the rubbing-induced alignment of nematic liquid crystals (LCs) relate to the interfacial characteristics of LC-polyimide has been studied. The characteristics of the LC alignment (such as the LC texture, the pretilt angle, and the anchoring energy) and their thermal stability have been investigated for 5 polyimides synthesized for this work. The work showed that the rubbed polyimide alignment layer induces the strong LC anchoring and that the characteristics and stability of LC alignment are determined by the short-ranged interactions between LC and polyimide molecules at the alignment layer surface. The increased flexibility of the polyimide accelerates thermal imidization, increases the pretilt angle, and improves the alignment stability. It also turned out that fluorination of the polyimide tends to deteriorate the alignment uniformity and stability. No distinct differences in the alignment characteristics were shown for the aromatic- and alicyclic-dianhydride polyimides.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.287-288
• /
• 2005

In this study, we have investigated electro-optical characteristics of thermal and UV stressed TN cells on the rubbed polyimide surface. Mono-domain alignments of thermal stressed TN cells over temperature of liquid crystal isotropic phase were almost same that of no thermal stressed TN cells. Also, threshold voltage and response time of thermal stressed TN cells were same that of no thermal stressed TN cells. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface show decrease of characteristics as increasing thermal stress time. Therefore, thermal stability of TN cell was decreased by high thermal stress for the long times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.451-452
• /
• 2005

In this study, the threshold voltage and the response time of thermal stressed TN-LCDs showed the same performances on none thermal stressed TN-LCDs. There was little change in TN cells. Also, while increasing thermal stress time, the transmittances of TN-LCDs on the rubbed PI surface were almost the same, But the thermal stability of TN cell was deteriorated.