• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1600-1602
• /
• 1996

We have investigated the anisotropic dispersion force effects for surfaces alignment of liquid crystals (LCs) on rubbed polystyrene (PS) surfaces by unidirection. In microphotographs an of the textures, we obtained the nematic (N) LCs are shown to align in both direction parallel and perpendicular to the rubbing for region up to medium rubbing, however to align in the direction perpendicular to the rubbing for strong rubbing region. We suggest that the anisotropic dispersion force is very important rather than macro-surface groove effect to uniform alignment of LCs. We also measured the temperature dependence of extrapolation length of 5CB on rubbed PS surfaces for strong rubbing. It is shown that the polar anchoring strength of 5CB is very weak on rubbed PS surface compared to the rubbed polyimide (PI) surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.18-22
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about $1.7^{\circ}$ lower on the glass substrate than on thin plastic substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.498-501
• /
• 2003

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$. The fast response time of TN cell using high birefringence with ${\Delta}nd=0.363$ on the rubbed PI surface was measured 5.1 ms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.487-488
• /
• 2005

We have investigated the Electro-Optical Characteristics for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.69-74
• /
• 1999

We have investigated that the high pretilt angle of the NLC, 4-n-pentyl-4-cyanobiphenyl (5CB), was observed on rubbed polythiophene (PTP) surfaces with alkyl chains with more than 10 carbon atoms; it is attributed to the surface-excluded volume effect by the alkyl chain lengths between the LCs and the PTP surfaces. Next, we investigated that the odd-even effect of the polar anchoring strength in 5CB on rubbed PTP surfaces with alkyl chain lengths has been successfully evaluated. The anchoring strength of 5CB for rubbed PTP surfaces with odd-number is weak compared with even-number up to the 6 carbon atoms in the alkyl chain; however, odd-number is strong compared with even-number above 7 carbon atoms. The weak anchoring strength of 5CB is approximately $1\times10^{-3} (J/m^2$) on rubbed PTP surface with 7 carbon atoms; it is relatively strong anchoring strength. Consequently, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the characteristics of the polymer and observed clearly for short alkyl chain lengths.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1453-1455
• /
• 1996

The odd-even effect of the alkyl chain length of rubbed polyimide Langmuir-Blodgett (LB) surfaces on the extrapolation length of 5CB has been successfully evaluated for the first time by measuring polar anchoring strength. The extrapolation length of 5CB for rubbed PI-LB surfaces with even-numbers is small compared with odd-numbers for alkyl chain lengths of greater than 7 carbons. The extrapolation length of 5CB on rubbed PI-LB surfaces with odd-numbers increases gradually as the temperature increases but tends to diverge near the clearing temperature (Tc=$35.3^{\circ}C$). The extrapolation length diverges because of rapidly decreasing surface order near $T_c$. We suggest that the polar anchoring strength on rubbed PI-LB surfaces with even-number is strong because of relatively high surface ordering caused by more crystalline surfaces. Finally, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the character of the polymer and observed clearly for long alkyl chain lengths.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.265-268
• /
• 1995

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength and surface order parameter on rubbed polyimide (PI) films. The order of polar anchoring strength for NLCs on rubbed PI films is 5CB > PCH5 > CCH5. This order is the same for all rubbing strengths investigated. The surface order parameter for NLCs is 5CB > PCH-5 > CCH5 on rubbed PI films. From these results, we suggest that the polar anchoring strength is strongly related to the surface order parameter.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.661-667
• /
• 2004

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (Δ$\varepsilon$＞0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC(Δ$\varepsilon$＞0) is smaller than that of the negative type (Δ$\varepsilon$＞0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature. As the increase of baking temperature, we obtain that AFM (atomic force microscope) image of rubbed PI surface using Hot-plate method has formed better solid micro-groove structure than oven method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1815-1817
• /
• 1999

In this paper, the generation of high pretilt angle in nematic liquid crystal (NLC) by dipping effect on three kinds of the rubbed polyimide (PI) surface was investigated. The generated pretilt angle of NLC increases due to dipping effect before rubbing treatment on two kinds of the rubbed PI surface with side chain. The generated pretit angle in NLC by using dipping effect after rubbing treatment on PI surface with short side chain is high compared to the PI surface with long side chain. The generated pretit angle of the positive type NLC $(\Delta{\varepsilon}>0)$ is higher as than that of the negative type NLC $({\Delta}{\varepsilon}<0)$ by using dipping effect before rubbing treatment on homeotropic layer. The generated pretilt angle of NLC is attributed to perpendicular component of permittivity ${\varepsilon}_{\perp}$ of NLC on rubbed PI surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1125-1131
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on the two kinds of polyimide (PI) surfaces using thin plastic substrates. The NLC pretilt angles generated on thin plastic substrates are higher than that on the glass substrate. We study that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass.