• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.329-332
• /
• 1999

In this paper, BST((Bao.&o,dTi0:3) thin films were deposited by the rf magnetron sputtering method on Pt/$SiO_2$/Si substrate. Pt, $RuO_2$, Ag, Cu films for the formation of top electrode were deposited on BST thm films. And then Top Electrodes/BST/Pt capacitors were annealed with rapid thermal annealing(RTA) at various temperature. We have investigated effect of post-annealing on the electrical properties such as dielectric constant and leakage current of the capacitors. It was found that electrical properties of the capacitors were greatly depended on the annealing temperatures as well as the materials of top electrodes. In BST thin films with Pt top electrode was annealed at $700^{\circ}C$. the dielectric constant was measured to the value of 346 at l[kHzl and the leakage current was obtained to the value of $8.76\times10^8$[A/$\textrm{cm}^2$] at the forward bias of 2[V].

• Advances in Energy Research
• /
• 제4권2호
• /
• pp.177-187
• /
• 2016

Ammonia borane $NH_3BH_3$ solubilized in organic solvent is a potential liquid-state chemical hydrogen storage material. In this study, metal acetylacetonates like $Fe(O_2C_5H_7)_3$, $Co(O_2C_5H_7)_2$, $Ni(O_2C_5H_7)_2$, $Pd(O_2C_5H_7)_2$, $Pt(O_2C_5H_7)_2$ and $Ru(O_2C_5H_7)_3$ are considered for assisting dehydrocoupling of ammonia borane in diglyme (0.135 M) at $50^{\circ}C$. The molar ratio between ammonia borane and metal acetylacetonate is fixed at 100. A protocol for the separation of the soluble and insoluble fractions present in the slurry is proposed; it consists in using acetonitrile to make the precipitation of metal-based compounds easier and to solubilize boron-based intermediates/products. The nature of the metal does not affect the dehydrocoupling mechanisms, the $^{11}B\{^1H\}$ NMR spectra showing the formation of the same reaction intermediates. The aforementioned metal acetylacetonates do mainly have effect on the kinetics of dehydrocoupling. Dehydrocoupling takes place heterogeneously and dehydrogenation of ammonia borane in these conditions leads to the formation of polyborazylene via intermediates like e.g., B-(cyclodiborazanyl) amine-borane and borazine. Our main results are reported and discussed herein.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.317.2-317.2
• /
• 2013

Ultrathin oxide encapsulated metal-oxide hybrid nanocatalysts have been fabricated by a soft chemical and facile route. First, SiO2 nanoparticles of 25~30 nm size have been synthesized by modified Stobber's method followed by amine functionalization. Metal nanoparticles (Ru, Rh, Pt) capped with polymer/citrate have been deposited on functionalized SiO2 and finally an ultrathin layer of TiO2 coated on surface which prevents sintering and provides high thermal stability while maximizing the metal-oxide interface for higher catalytic activity. TEM studies confirmed that 2.5 nm sized metal nanoparticles are well dispersed and distributed throughout the surface of 25 nm SiO2 nanoparticles with a 3-4 nm TiO2 ultrathin layer. The metal nanoparticles are still well exposed to outer surface, being enabled for surface characterization and catalytic activity. Even after calcination at $600^{\circ}C$, the structure and morphology of hybrid nanocatalysts remain intact confirm the high thermal stability. XPS spectra of hybrid nanocatalyst suggest the metallic states as well as their corresponding oxide states. The catalytic activity has been evaluated for high temperature CO oxidation reaction as well as photocatalytic H2 generation under solar simulation. The design of hybrid structure, high thermal stability, and better exposure of metal active sites are the key parameters for the high catalytic activity. The maximization of metal-TiO2 interface interaction has the great role in photocatalytic H2 production.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.298-303
• /
• 2003

Bi$_4$-$_{x}$EU$_{x}$Ti$_3$O$_{12}$ (BET) thin films were etched by inductively coupled CF$_4$/Ar plasma. We obtained the maximum etch rate of 78 nm/min at the gas mixing ratio of CF$_4$(10%)/Ar(90%). The variation of volume density for F and Ar atoms are measured by the optical emission spectroscopy. As CF$_4$increased in CF$_4$/Ar plasma, the emission intensities of F increase, but Ar atoms decrease, which confirms our suggestion that emission intensity is proportional to the volume density of atoms. From X-ray photoelectron spectroscopy, the intensities of the Bi-O, the Eu-O and the Ti-O peaks are changed. By pure Ar plasma, intensity peak of the oxygen-metal (O-M : TiO$_2$, Bi$_2$O$_3$, Eu$_2$O$_3$) bond was seemed to disappear while the intensity of pure oxygen peak showed an opposite tendency. After the BET thin films was etched by CF$_4$/Ar plasma, the peak intensity of O-M bond increase slowly, but more quickly than that of peak belonged to pure oxygen atoms due to the decrease of Ar ion bombardment. Scanning electron microscopy was used to investigate etching Profile. The Profile of etched BET thin film was over 85$^{\circ}$./TEX>.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.133-133
• /
• 2003

최근에 강유전체 매체와 원자력 현미경 (Atomic Force Microscopy, AFM)을 이용한 초고밀도 정보 저장 장치에 대한 연구가 활발히 진행되고 있다. 이와 아울러 나도 크기의 도메인에 대하 연구에 있어서 PZT 박막의 분극 방향에 따른 SrRuO$_3$의 저항 변화를 AFM 탐침을 이용하여 감지하는 방법을 제안하였다. 본 연구에서는 Metal tip/semiconductor/barrier oxide/ferroelectric 구조에서 강유전체 분극에 의한 저항 변화의 가능성을 실험하고자, 이와 등가 구조인 Pt tip/n-Si/SiO$_2$ 구조에서 Pt 탐침과 반도체 층 사이의 I-V 특성을 측정함으로써, 게이트 전압에 따른 반도체 층의 저항변화에 대해서 분석해 보았다. 그 결과 게이트 전압에 따라서 과밀 지역 (accumulation layer)과 공핍 지역 (depletion layer)이 형성됨에 따라서 반도체 층의 정항이 변하여 I-V 특성이 변하게 됨을 관찰하였으며, 이 결과로부터 분극 방향에 따라서도 반도체 층의 저항이 변할 수 있음을 알 수 있었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제8권1호
• /
• pp.51-55
• /
• 2004

Sopungsungi-won has been used as a traditional medicine for diabetes and it has been proved to be a potential remedy for type 2 diabetes mellitus. We previously reported that water extract of Sopungsungi-won exhibits anti-diabetic effects both in vivo and in vitro experiments. In the present study, we have chosen to examined anti-apoptotic effect of Rheum undulatum, which is the main component of Sopungsungi-won, on pancreatic ${\beta}-cells$, HIT-T15, against hydrogen peroxide $(H_2O_2)$. oxidative stress. To investigate the anti-apoptotic effect of Rheum undulatum water extract (RUWE) against $H_2O_2-induced$ apoptosis in pancreatic ${\beta}-cell$ line of hamster, HIT-T15, MTT assay, DAPI staining, TUNEL assay, RT-PCR and caspase-3 enzyme assay were performed. The morphological analysis demonstrated that cells treated with $H_2O_2$ exhibited classical apoptotic features, while such changes was reduced in cells pre-treated with RUWE. In addition, RUWE pre-treated cells prior to $H_2O_2$ treatment induced increase of levels of bcl-2 expression and decrease of caspase-3 enzyme activity compared to cells treated with $H_2O_2$ only. These results provide the possibility of usage of RU in patients with progressively deteriorated diabetes.

• 한국환경보건학회지
• /
• 제35권3호
• /
• pp.201-208
• /
• 2009

Oxidation of phenol in aqueous media by electro-Fenton process using Ru-Sn-Sb/graphite electrode has been studied. Hydrogen peroxide was electrically generated by reaction of dissolved oxygen in acidic solutions containing supporting electrolyte and $Fe^{2+}$ was added in aqueous media. Phenol degradation experiments were performed in the presence of electrolyte media at pH 3. Effect of operating parameters such as current, electrolyte type (NaCl, KCl and $Na_2SO_4$) and concentration, $Fe^{2+}$ concentration, air flow rate and phenol concentration were investigated to find the best experimental conditions for achieving overall phenol removal. Results showed that current of 2 A, NaCl electrolyte concentration of 2g/l, 0.5M concentration of $Fe^{2+}$, air flow rate of 1l/min were the best conditions for mineralization of the phenol by electro-Fenton.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1824-1826
• /
• 1999

In order to develop key technologies for a kW class for polymer electrolyte fuel cell (PEFC), various membranes (Nafion(112, 115, 117), Dow, Flemion, Gore, and Hanwha), and electrocatalysts (Pt/C, PtNi/C PtNiCo/C and PtRu/C) were used in the fabrication of the MEAs by using transfer printing technique. The effects of the thickness of Nafion membranes, electrocatalysts and the operating conditions (e.g. temperature, reactant gas pressure, and composition) on the performance of the MEA were investigated in the PEFC single cell($O_2/H_2$, and Air/$H_2$ cell). The performances of the MEAs for $O_2/H_2$ and Air/$H_2$ cells has been evaluated.

• 대한화학회지
• /
• 제46권1호
• /
• pp.26-36
• /
• 2002

$MoO_3$와 H-SAPO-34의 고체상 반응은 상자기성의 Mo(V) 화학종을 띤다. 탈수하면 Mo(V) 화학 종이 약하게 나타나지만 계속적으로 활성화 시키면 ESR로 규명할 수 있는 $Mo(V)_{5c}$와 $Mo(V)_{6c}$와 같은 Mo(V) 화학종이 생성된다. ESR과 ESEM 자료들은 $(MoO_2)^+$나 $(MoO)^{3+}$ 같은 옥소-몰리브덴 화학 종을 보여준다. $(MoO_2)^+$ 화학 종이 다음과 같이 더 합리적인 것 같이 보여진다. H-SAPO-34는 낮은 골격전하를 갖기 때문에 높은 양전하를 갖는 $(MoO)^{3+}$는 쉽게 안정화 되지 못한다. 소성된 H-SAPO-34와 도데카몰리브덴 규산 용액 사이의 용액 상태 반응은 단지 $MoO^{2+}$ 화학 종만을 발생한다. 마름모형 ESR 신호는 $D_2O$, $CD_3OH$, $CH_3CH_2OD$와 $ND_3$를 흡착할 때 관측되었다. Mo(V) 화학 종의 배위구조와 위치는 트리 펄스 전자 스핀반향 자료로 측정하였다. MoH-SAPO-34에 메탄올, 에틸렌 암모니아와 물이 흡착될 때 3분자, 1분자, 1분자와 1분자가 $(MoO_2)^+$에 각각 직접 배위하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.157.1-157.1
• /
• 2011

선택적 CO 산화반응(PrOx)에 사용되는 촉매 중 Pt, Ru, Rh 등의 귀금속 계 촉매들은 비귀금속 계 촉매에 비해 활성이 좋은 반면 가격이 비싸다는 경제적인 제한점이 있다. 따라서 소량의 귀금속을 사용하여 높은 활성의 촉매를 제조하고자 활성금속의 고분산 담지 방법에 대한 연구가 이루어지고 있다. 본 연구에서는 담체인 ${\gamma}-Al_2O_3$ 표면에 활성금속인 Pt의 고분산 담지를 위해 증착-침전법(Deposition-precipitation)을 적용하였으며 용액의 pH 변화에 따른 Pt 금속 입자의 분산도에 대한 영향을 살펴보았다. Pt의 함량은 1wt%로 고정하였고 침전제로 NaOH를 사용하여 용액의 pH를 pH 7.5 ~ 10.5로 변화시켰다. 제조된 촉매는 세척 후 $400^{\circ}C$, 3시간 소성 하였다. 제조된 1wt% Pt/$Al_2O_3$ 촉매의 특성분석을 위해 BET, TPR, CO-chemisorption을 수행하였다. PrOx 반응 실험은 GHSV=60,000 $ml/g_{cat}{\cdot}h$, $T=100{\sim}200^{\circ}C$, ${\lambda}$=4 조건에서 수행되었으며 반응 전에 촉매는 $400^{\circ}C$, 3시간 환원 후 사용하였다. 촉매의 특성분석과 PrOx 반응 실험 결과를 통해 촉매가 담체 위에 고분산 되는 최적의 pH를 확인할 수 있었으며, 기존의 함침법으로 제조된 촉매와 성능 비교를 통해 제조방법에 따른 영향을 살펴보았다.