• 제목/요약/키워드: RuO$_2$

검색결과 507건 처리시간 0.029초

Lifetime of Insoluble Anode for Cathodic Protection on Concrete Construction

  • Sohn, Kicheon;Chang, Hyunyoung;Kim, Youngsik
    • Corrosion Science and Technology
    • /
    • 제4권2호
    • /
    • pp.56-59
    • /
    • 2005
  • In rebar concrete structure, the corrosion of rebar can arise the deterioration of concrete structure and may affect the safety of the whole system. Recently, several methods for corrosion protection have been used and are more important for concrete structure using the sand including chloride ion. Among several protections, electrical cathodic protection has been expected to be one of the most useful methods in corrosion protection for reinforcement of concrete structures. The anode for cathodic protection needs high current density, high corrosion resistance and low overvoltage. To fill up the special qualities, the insoluble anodes were developed and these anodes were coated with metal oxide of $TiO_2$, $ZrO_2$, $RuO_2$, and $IrO_2$. Lifetime of these anodes can be one of the important factors affecting the lifetime of concrete structure in cathodic protection. In this work, several anodes were made by sol-gel method and thermal decomposition method and the lifetime of these anodes was evaluated by NACE international standard test method, TM 0294-94. Also, we did analyze the properties of coated metal oxides.

2-(Phenylamino)acetohydrazide로부터 유도된 Hydrzone 리간드와 그들의 착물의 합성, 특성 및 항균활성 (Synthesis, Characterization and Antimicrobial Activities of Hydrazone Ligands Derived from 2-(phenylamino)acetohydrazide and Their Metal Complexes)

  • EL-Saied, F.A.;Shakdofa, M.M.E.;Al-Hakimi, A.N.
    • 대한화학회지
    • /
    • 제55권3호
    • /
    • pp.444-453
    • /
    • 2011
  • N'-(2-hydroxybenzyl)-2-(phenylamino)acetohydrazide ($H_2L^1$, 1) 및 N'-((3-hydroxy-naphthalen-2-yl)methylene)-2-(phenylamino)acetohydrazide ($H_2L^2$, 13)에 대한 VO(II), ZrO(II), Hf(IV), $UO_2$(II), Sn(II), V(V)$O_3$, Ru(III), Cd(II), Ho(III) 및 Yb(III) 착물을 합성하여 원소분석, $^1H$ NMR, IR, UV-Vis, 전기전도도 및 열분석 (DTA 및 TG)을 통해 특성을 조사하였다. 이들 리간드는 분광학적 결과에 의하면 중성 이배위, 일염기성 이배위, 일열기성 삼배위 또는 이염기성 삼배위 리간드로 행동한다. 그 결과 azomethine 질소원자, 양성자화 되어있거나 또는 탈양성자화 된 형태의 페놀 하이드록시 그룹 그리고 에놀 또는 케톤형 카드보닐 그룹을 통해 금속이온에 결합한다. 이들 리간드와 그 금속 착물들은 모체 리간드 및 금속이온 용액에 비해 높은 항균 및 항박테리아 저해효과를 보인다. 대부분의 금속 착물은 표준 항균성 시약 (amphotricene B) 보다 더 높은 항균 활동성을 보인다. 또한 이들 리간드와 착물은 항박테리아 활성도보다는 항균활성도에서 더 높은 수치를 보인다.

'진공 원자층 증착' 공정을 적용한 염료감응형 태양전지의 효율 개선 연구

  • 강고루;신진호;차덕준;고문규;강상우;김진태;윤주영;심승교;남정은
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.373-373
    • /
    • 2012
  • 염료 감응형 태양전지는 기존 Si 기반 PN접합 무기 태양전지에 비해서 경제적이다. 하지만 그 에너지 변환 효율은 아직까지 세계 최고 수준이 10%밖에 도달하지 못하였다. 그래서 다양한 방식의 효율개선 연구가 활발히 진행되고 있는 실정이다. 본 연구에서는 진공원자층증착(ALD)를 이용하여 Core-shell 구조의 $TiO_2$층 위에 아주 얇고 균일한 $Al_2O_3$ (알루미나) 산화막을 입혔다. 이를 통해서 염료감응형 태양전지의 에너지 변환 효율을 향상시켰다. 본 연구에서는 진공원자층증착(ALD)기술을 이용한 $Al_2O_3$ (알루미나) 산화막의 증착조건에 따른 염료감응태양전지의 효율 개선 매커니즘에 대해서 고찰하였다.

  • PDF

ICP-AES를 이용한 리튬 용융염내의 미량 금속성분원소 정량에 관한 연구 (Quantitative Analysis of Trace Metals in Lithium Molten Salt by ICP-AES)

  • 김도양;표형열;박용준;박양순;김원호
    • 분석과학
    • /
    • 제13권3호
    • /
    • pp.309-314
    • /
    • 2000
  • 리튬 용융염($LiC+Li_2O$) 내에 미량으로 존재하는 핵분열생성물을 유도결합 플라스마 원자방출분광기(ICP-AES)를 이용하여 분석하였다. 분석대상 원소 중 감도가 가장 좋은 파장을 선택해 이들 파장에서 리튬 500, 1,000, 2,000 mg/L에 따른 분광학적 간섭 여부를 확인한 결과, 분석원소중 0.1 mg/L 이하의 Y, Nd, Sr, La, Eu의 방출세기는 리튬의 농도가 2,000 mg/L까지 증가시켜도 분광학적 간섭을 받지 않은 반면, Mo, Ba, Ru, Pd, Rh, Zr, Ce는 10% 에서 50% 이상 분광학적 간섭과 매트릭스에 의한 스펙트럼 방해가 나타났다. 리튬 매질로부터 미량 금속원소들을 군분리하기 위하여 모의 용융염 용액을 조제해 암모니아수를 가한 후 분리하고 다시 산처리하여 얻은 용액을 ICP-AES로 회수율을 측정하였다. 분석원소 중 Ru, Y, Rh, Zr, Nd, Ce, La, Eu의 회수율은 90% 이상인 반면 Mo, Ba, Pd, Sr는 낮은 회수율을 보여주었으며, 가해준 암모니아수 양이 증가할수록 회수율이 증가하는 경향을 보였다.

  • PDF

Sensing Characterization of Metal Oxide Semiconductor-Based Sensor Arrays for Gas Mixtures in Air

  • Jung-Sik Kim
    • 한국재료학회지
    • /
    • 제33권5호
    • /
    • pp.195-204
    • /
    • 2023
  • Micro-electronic gas sensor devices were developed for the detection of carbon monoxide (CO), nitrogen oxides (NOx), ammonia (NH3), and formaldehyde (HCHO), as well as binary mixed-gas systems. Four gas sensing materials for different target gases, Pd-SnO2 for CO, In2O3 for NOx, Ru-WO3 for NH3, and SnO2-ZnO for HCHO, were synthesized using a sol-gel method, and sensor devices were then fabricated using a micro sensor platform. The gas sensing behavior and sensor response to the gas mixture were examined for six mixed gas systems using the experimental data in MEMS gas sensor arrays in sole gases and their mixtures. The gas sensing behavior with the mixed gas system suggests that specific adsorption and selective activation of the adsorption sites might occur in gas mixtures, and allow selectivity for the adsorption of a particular gas. The careful pattern recognition of sensing data obtained by the sensor array made it possible to distinguish a gas species from a gas mixture and to measure its concentration.

Identification of Gas Mixture with the MEMS Sensor Arrays by a Pattern Recognition

  • Bum-Joon Kim;Jung-Sik Kim
    • 한국재료학회지
    • /
    • 제34권5호
    • /
    • pp.235-241
    • /
    • 2024
  • Gas identification techniques using pattern recognition methods were developed from four micro-electronic gas sensors for noxious gas mixture analysis. The target gases for the air quality monitoring inside vehicles were two exhaust gases, carbon monoxide (CO) and nitrogen oxides (NOx), and two odor gases, ammonia (NH3) and formaldehyde (HCHO). Four MEMS gas sensors with sensing materials of Pd-SnO2 for CO, In2O3 for NOX, Ru-WO3 for NH3, and hybridized SnO2-ZnO material for HCHO were fabricated. In six binary mixed gas systems with oxidizing and reducing gases, the gas sensing behaviors and the sensor responses of these methods were examined for the discrimination of gas species. The gas sensitivity data was extracted and their patterns were determined using principal component analysis (PCA) techniques. The PCA plot results showed good separation among the mixed gas systems, suggesting that the gas mixture tests for noxious gases and their mixtures could be well classified and discriminated changes.

나노임프린트 패터닝과 자성박막도금을 이용하여 제작한 패턴드미디어용 자기패턴의 자기적 및 결정구조특성에 관한 연구 (Magnetic & Crystallographic Properties of Patterned Media Fabricated by Nanoimprint Lithography and Co-Pt Electroplating)

  • 이병규;이두현;이명복;김해성;조은형;손진승;이창형;정근희;서수정
    • 한국자기학회지
    • /
    • 제18권2호
    • /
    • pp.49-53
    • /
    • 2008
  • 50 nm pitch의 magnetic dot pattern을 갖는 hard disk drive용 patterned media를 nanoimprint lithography(NIL) patterning과 electroplating 공정을 이용하여 제작하고 자기 및 결정구조 특성을 관찰하였다. Patterned media는 Si(100) wafer 위에 Ru(20nm)/Ta(5 nm)/$SiO_2$(100 nm)를 순차적으로 증착한 후 nanoimprint lithography를 이용하여 25 nm half pitch의 hole pattern을 형성하고 그 후 패터닝된 기판을 plasma ashing 공정을 이용하여 기판의 Ru층을 노출시킨뒤 electroplating을 이용하여 Co-Pt 합금막을 증착하여 제작하였다. Magnetic force microscopy(MFM) 분석을 이용하여 제작된 각각의 magnetic dot pattern이 single domain 특성과 수직자기이방성을 가지고 있음을 확인하였고, superconducting quantum interference device(SQUID) 분석을 통하여 2900 Oe이상의 높은 수직방향 보자력을 확인하였다.

ICR계 마우스에서 Enrofloxacin과 Colistin 복합체의 단회 경구 및 정맥투여시 급성독성 (Acute Toxicity of Enrofloxacin-Colistin Combinations after a Single Oral and Intravenous Administration in ICR Mice)

  • 김민규;박승춘;윤효인;오태광;최양웅
    • Toxicological Research
    • /
    • 제14권3호
    • /
    • pp.385-391
    • /
    • 1998
  • The study was carried out to evaluate the acute toxicity of enrofloxacin-colistin combination via a single oral(p.o.)and intravenous(i.v.) administration in ICR mice. All procedures of the test were performed by the established regulation of Korean National Institute of Safety Research (1994. 4.14). The maximal dose of oral and intravenous routes was 5,000mg/kg and 90mg/kg, consisting with each 6 groups including control of male and female, respectively. As the results, $LD_{50}$m}'s of the combinations showed 3,075mg/kg (f)and 2,564mg/kg(m) after oral administrations, together with 48mg/kg(f) and 40mg/kg(m) after intravenous administration. These facts indicated that acute toxicitiy of enrofloxacin-colistin combination were different depending on the administration routes and sexes in ICR mice. In conclusion, the route of enrofloxacin-colistin combination must not choose as i.v. route administration in terms of acute toxicity based on $LD_{50}$.

  • PDF

가시광감응을 위한 금속이나 $WO_3$ 도핑된 $TiO_2$ 튜브의 광활성 연구 (Photocatalytic activity under visible-light with metal or $WO_3$ deposited-$TiO_2$ tubes)

  • 허아영;이창하;박민성;심은정;윤재경;주현규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.227.1-227.1
    • /
    • 2010
  • 본 연구는 자외선 영역의 흡수로 전자 정공의 전하쌍을 생성함으로써 광전압 및 전류를 일으키는 티타니아 물질을 금속지지체 표면에 양극산화로 튜브형 $TiO_2$(anodized tubular $TiO_2$; ATT)로 제조한 후 나노크기의 금속 혹은 $WO_3$입자를 담지하여 광감응 재료로 활용하였다. 이는 기존의 입자나 콜로이드 형태로 광촉매 물질을 고정화하여 사용한 재료의 탈리현상 및 효율저하를 극복하기 위함이다. ATT는 전해질 내에 전기화학적 에칭율과 화학적 용해율의 비율에 의해 나노튜브 길이 성장에 영향을 미치는데 이를 유기 전해질과 불산 전해질을 사용하여 정전압 혹은 정전류의 조건에서 다양한 길이의 $TiO_2$ 나노튜브를 제조하였다. 여기에 전기분해담지(electrolytic deposition; ELD)를 통하여 정전류 조건에서 다양한 금속(Pt, Pd, Ru)을 나노크기의 형태로 담지하여 광촉매 내 생성된 전자 정공의 재결합을 줄이고자 하였고 $WO_3$의 담지를 통하여 가시광 감응을 높이고자 하였다. 제조된 여러 조건의 시료는 SEM과 EDAX를 통하여 형태와 길이, 담지량을 확인 하고 XRD를 이용하여 열처리 온도에 따른 결정화상태를 확인하였으며 광전류 측정 및 Cr(VI)의 광환원과 MB의 광분해를 통하여 광효율을 관찰하였다. 금속이 도핑되었을 경우 순수 ATT보다 보통 3배의 흡착률과 UV광원 아래 2배의 광효율을 관찰할 수 있었는데 이 중 Pt의 담지가 가장 효율이 좋았으며 흡착률에서는 담지량의 증가에 따른 증가선을 관찰 할 수 있었으나 광원 사용시 3%담지율에서 최적을 확인 할 수 있었다. 또한 $TiO_2$외 가시광감응 활성을 높이기 위한 다양한 광촉매제조가 진행 중에 있다.

  • PDF