• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.139-139
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.671-677
• /
• 2001

A RuO$_2$ Schottky photo-detector was designed and fabricated with GaN layers on the sapphire substrate. For good absorption of UV light, an epitaxial structure with undoped GaN(0.5 ${\mu}{\textrm}{m}$)/n￣-GaN(0.1${\mu}{\textrm}{m}$)/n＋-GaN(1.5${\mu}{\textrm}{m}$) was grown by MOCVD. The structure had the carrier concentrations of 3.8$\times$10$^{18}$ cm￣$^3$, the mobility of 283$\textrm{cm}^2$/V.s. After ECR etching process for mesa structure with the diameter of about 500${\mu}{\textrm}{m}$, Al ohmic contact was formed on GaN layer. After proper passivation between the contacts with Si$_3$/N$_4$, was formed on undoped GaN layer. The fabricated Schottky diode had a specific contact resistance of 1.15$\times$10$^{-5}$ ［$\Omega$.$\textrm{cm}^2$］. It has a low leakage current of 305 pA at -5 V, which was attributed by stable characteristics of RuO$_2$ Schottky contact. In optical measurement, it showed the high UV to visible extinction ratio of 10$^{5}$ and very high responsivity of 0.23 A/W at the wavelength of 365nm.

• Clean Technology
• /
• v.25 no.3
• /
• pp.256-262
• /
• 2019

Hydroxylammonium nitrate (HAN)-based liquid propellants are attracting attention as environmentally friendly propellants because they are not carcinogens and the combustion gases have little toxicity. The catalyst used to decompose the HAN-based liquid propellant in a thruster must have both low temperature activity and high heat resistance. The objective of this study is to prepare an Ru/alumina/metal foam catalyst by supporting alumina slurry on the surface of NiCrAl metal foam using a washing coating method and then to support a ruthenium precursor thereon. The decomposition activity of a HAN aqueous solution of the Ru/alumina/metal foam catalyst was evaluated. The effect of the number of repetitive coatings of alumina slurry on the physical properties of the alumina/metal foam was analyzed. As the number of alumina wash coatings increased, mesopores with a diameter of about 7 nm were well-developed, thereby increasing the surface area and pore volume. It was optimal to repeat the wash coating alumina on the metal foam 12 times to maximize the surface area and pore volume of the alumina/metal foam. Mesopores were also well developed on the surface of the Ru/alumina/metal foam catalyst. It was found that the metal form itself without the active metal and alumina can promote the decomposition reaction of the HAN aqueous solution. In the case of the Ru/alumina/metal foam-550 catalyst, the decomposition onset temperature was significantly lowered compared with that of the thermal decomposition reaction, and ${\Delta}P$ could be greatly increased in the decomposition of the HAN aqueous solution. However, when the catalyst was calcined at $1,200^{\circ}C$, the catalytic activity was lowered inevitably because the surface area and pore volume of the catalyst were drastically reduced and Ru was sintered. Further research is needed to improve the heat resistance of Ru/alumina/metal foam catalysts.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.335-340
• /
• 2016

Hydrogen production through proton exchange membrane water electrolysis (PEMWE) is expeditiously receiving international attention for renewable energy sources as well as energy storage system applications due to its environmentally friendly uses. A series of $Ir_{0.2}Ru_{0.8}O_2$ $Ir_{0.5}Ru_{0.8}O_2$ & $IrO_2$ catalysts were synthesized and electrochemically evaluated by using linear sweep voltammetry (LSV) technique. Furthermore, the PEMWE performances of full cells were evaluated by recording I-V Curves. The developed PEMWE stack was also operated in combination with a proton exchange membrane fuel cell (PEMFC) to demonstrate the discrete regenerative fuel cell (DRFC) performances. Produced hydrogen and oxygen from PEMWE were used as a fuel to operate PEMFC to establish a DRFC system.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.625-631
• /
• 1993

The types of the products of the reactions between RuH(NO)(Cyttp) and alkynes are sensitive to the nature of alkynes. Terminal, nonactivated alkynes (HC${\equiv}$CR, R=Ph, hexyl and $CH_2OH)$ produce acetylide complexes and terminal (HC${\equiv}$CR, R=C(O)Me, COOEt) or internal activated ones (RC${\equiv}$ CR, R=COOMe) lead to form alkenyl complexes. On the other hand, internal nonactivated alkynes (RC${\equiv}$CR, R=Ph) do not show reactivity toward RuH(NO)(Cyttp). These products can be rationalized by the cis-concerted mechanism but the radical pathway appears to work in the reaction of propargyl chloride. From the spectroscopic data, the trigonal bipyramidal structure with a linear NO group is proposed for these products.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.69-69
• /
• 2000

(Ba, Sr)TiO3 (BST)[1-3] 박막은 유전상수가 크고 고주파에서도 유전특성 저하가 적기 때문에 ULSI DRAM(Dynamic Random Access Memory)에 응용 가능한 물질로 최근 각광을 받고 있다. 하지만, 아직 BST 박막을 DRSM에 바로 적용하기 위해선 몇 가지 문제점이 있다. 그 중 누설전류 문제는 디바이스 응용시 매우 중요한 요소이다. 특히, DRAM에서 refresh time와 직접적인 관련이 있어 디바이스 내의 신뢰도 및 전력소모를 결정하는 주된 인자가 된다. 지금까지, BST 박막의 인가전업, 온도, 그리고 전극물질에 따른 누설전류 현상들이 고찰되었고, 이에 관한 많은 전도기구 모델들이 제시되었다. Schottky emission, Poole-Frenkel emission, space charge limited conduction 등이 그 대표적인 예이다. 하지만 아쉽게도 BST 박막의 정확한 누설 전류 전도 기구를 완전히 설명하는데는 아직 한계가 있다. 따라서 본 연구에서는 제작된 BST 커패시터 내의 기본적인 전기적 성질을 조사하고, 정확한 누설전류 기구 규명에 초점을 두고자 한다. 이를 위해 기존의 여러 기구들과 비교 분석할 것이다. 하부전극으로 사용하기 위해 스퍼터링 방법으로 p-Si(100) 기판위에 RuO2 박막을 약 120nm 증착하였다. 증착전의 chamberso의 초기압력은 5$\times$10-6 Torr이하의 압력으로 유지시켰다. Ar/O2의 비는 이전 실험에서 최적화된 9/1로 하였다. BST 박막 증착 시 5분간 pre-sputtering을 실시한 후 하부전극 기판위에 BST 박막을 증착하였다. 증착이 끝난 후 시편을 상온까지 냉각시킨 후 꺼내었다. 전기적 특성을 측정하기 상부전극으로 RuO2와 Al 박막을 각각 상온에서 100nm 증착하였다. 이때 hole mask를 이용하여 반경이 140um인 원형의 상부전극을 증착하였다. BST 박막의 증착온도가 증가하고 Ar/O2 비가 감소할수록 제작된 BST-커패시터의 전기적 성질이 우수하였다. 증착온도 $600^{\circ}C$, ASr/O2=5/5에서 증착된 막의 누설전류는 4.56$\times$10-8 A/cm2, 유전상수는 600 정도의 값을 나타내었다. 인가전압에 따른 BST 커패시터의 transition-current는 Curie-von Schweider 모델을 따랐다. BST 박막의 누설전류 전도기구는 기존의 Schottky 모델이 아니라 modified-Schottky 무델로 잘 설명되었다. Modified-Schottky 모델을 통해 BST 박막의 광학적 유전율 $\varepsilon$$\infty$=4.9, 이동도 $\mu$=0.019 cm2/V-s, 장벽 높이 $\psi$b=0.79 eV를 구하였다.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1235-1245
• /
• 2009

The purpose of this study is to investigate electro-generation of free Cl, $ClO_2$, $H_2O_2$ and $O_3$ and degradation of Rhodamine B in solution using Ru-Sn-Sb electrode. Electrolysis was performed in one-compartment reactor using a dimensionally stable anode(DSA) of Ru-Sn-Sb/Ti as the working electrode. The effect of applied current (0.5-3 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and concentration (0.5-2.5 g/L), air flow rate (0-3 L/min) and solution pH (3-11) was evaluated. Experimental results showed that concentration of 4 oxidants was increased with increase of applied current, however optimum current for RhB degradation was 2 A. The generated oxidant concentration and RhB degradation of the of Cl type-electrolyte was higher than that of the sulfate type. The oxidant concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.75 g/L. Optimum air flow rate for the oxidants generation and RhB degradation was 2 L/min. $ClO_2$ and $H_2O_2$ generation was decreased with the increase of pH, whereas free Cl and $O_3$ was not affected by pH. RhB degradation was increase with the pH decrease.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.202-202
• /
• 2012

염료감응태양전지(DSSC)의 광변환 효율을 향상시키기 위하여 진공챔버에서 450도 고온에서 O2, Ar, and N2 혼합가스를 주입하여 다양한 plasma로 TiO2 박막을 처리하면서 소성시켰다. TiO2 표면을 cleaning하고 활성화함으로서 염료의 결합력을 향상시키는 것 외에 TiO2 내부의 oxygen vacancy를 변화를 관찰하였다. 실험에 사용한 박막은 glass 위에 FTO 박막을 입히고, 다공성 TiO2 나노입자 박막을 코팅하여 제조하였다(porous TiO2 나노입자(${\sim}12{\mu}m$)/FTO(Fluorine doped Tin oxide; $1{\mu}m$)/glass). 완성된 광전극에 대해서 XRD, XPS, EIS, FE-SEM 등을 이용하여 분석하였다. 또한 이렇게 전처리된 광전극을 사용한 DSSC를 제작하였다. 그리고 Solar-simulator를 통해 그 효율을 측정하여 '플라즈마환경에서 소성된 광전극에 대한 DSSC의 광변환효율에 미치는 효과'을 고찰하였다.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.206-210
• /
• 2004

All array of carbon paste-based electrodes was prepared by screen printing the carbon paste modified with metal oxides $(TiO_2,\;RuO_2,\;PbO_2,\;Ni(OH)_2)$ and Prussian blue (PB). An electronic tongue system was assembled with the carbon-paste electrode array, and applied to discriminate the tastes of various commercial beverages and foods by measuring the chronoamperometric responses to the samples diluted in 0.1M carbonate buffer (pH 9.6). The results were analyzed with principal component analysis(PCA) method and plotted on two dimensional PCA coordinate; it was apparent that the amperometric electronic tongue system could discriminate the types of various foods and beverages.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.63-68
• /
• 1999

We have fabricated $WO_3$ thick film gas sensor under various firing conditions in order to study gas sensing properties in terms of the variation of microstructure and non-stoichiometric structure of gas sensing layer. $WO_3$ paste mixed homogeneously with organic vehicle was coated by screen printing method on alumina substrate composed of Au electrode and $RuO_2$heater on each side. To change filing condition, sensing materials were fared at 600-$800^{\circ}C$ for 1 hour and refired at $700^{\circ}C$ for 1 hour in the mixtures of $_Ar/O2$gas. In the result of heat-treatment, $WO_3$ gas sensor fared at $700^{\circ}C$ showed best gas sensing properties of 210 gas sensitivity and 2 second response time and the best firing environment was 40-50% of $Ar/O_2$gas.