• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.11-16
• /
• 2009

단일벽 탄소나노튜브의 표면 위에 동력학적 전위법으로 산화루테늄($RuO_2$)의 석출 및 루테늄-코발트 혼합산화물(Ru-Co mixed oxide)의 공석출에 의해 산화환원 수퍼커페시터용 복합전극을 제조하였다. 루테늄 성분이 13.13 wt%, 코발트 성분이 2.89 wt%가 석출된 Ru-Co 혼합산화물 전극은 낮은 전위 스캔속도($10\;mV\;s^{-1}$)에서는 $RuO_2$ 전극과 유사한 비용량(${\sim}620\;F\;g^{-1}$)을 나타내지만, 높은 스캔속도($500\;mV\;s^{-1}$)에서는 $RuO_2$ 전극보다 큰 비용량을 보인다. 높은 스캔 속도에서 Ru-Co 혼합산화물 전극이 비용량의 증가를 나타내는 것은 Ru 성분을 통한 전기전도성을 Co 성분이 구조적으로 지지해주기 때문이다.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.746-750
• /
• 2006

NiO films and Ru co-sputtered NiO films were deposited by reactive magnetron sputtering for micro-solid oxide fuel cell anode applications. The deposited films were reduced to form porous films. The reduction kinetics of the Ru doped NiO film was more sluggish than that of the NiO film, and the resulting microstructure of the former exhibited finer pore networks. The possibility of using the films for the anodes of single chamber micro-SOFCs was investigated using an air/fuel mixed environment. It was found that the abrupt increase in the resistance is suppressed in the Ru co-sputtered film, as compared to undoped film.

• 전기화학회지
• /
• 제6권3호
• /
• pp.169-173
• /
• 2003

금속산화물 전극을 이용한 전기화학 캐패시터는 일반적으로 산성 수용액 전해질에서 금속산화물에 대한 양성자의 가역적인 전기화학반응을 이용한다. 수계 전해질을. 사용한 수퍼캐패시터는 전위창(electrochemical stability window)이 유기계 전해질을 사용한 수퍼캐패시터에 비해 좁은 문제를 안고 있다. 금속산화물 전극과 리튬 또는 암모늄 이온을 함유한 유기계 전해질을 사용한 전기화학 캐패시터의 특성을 확인하였다. $RuO_2$ 전극을 사용한 전기화학 캐패시터는 1M $LiPF_6$, EC, DEC 및 EMC혼합용매 전해액 중에서 순환전위전류법(주사속도. 2mV/sec, 전위영역: $2.0\~4.2V(Li|Li^+))$으로 산화 및 환원에 대하여 비정전용량을 구한 바, 각각 145 및 $142F/g-RuO_2{\cdot}nH_2O$이었다

• 한국재료학회지
• /
• 제33권5호
• /
• pp.195-204
• /
• 2023

Micro-electronic gas sensor devices were developed for the detection of carbon monoxide (CO), nitrogen oxides (NO_x), ammonia (NH₃), and formaldehyde (HCHO), as well as binary mixed-gas systems. Four gas sensing materials for different target gases, Pd-SnO₂ for CO, In₂O₃ for NO_x, Ru-WO₃ for NH₃, and SnO₂-ZnO for HCHO, were synthesized using a sol-gel method, and sensor devices were then fabricated using a micro sensor platform. The gas sensing behavior and sensor response to the gas mixture were examined for six mixed gas systems using the experimental data in MEMS gas sensor arrays in sole gases and their mixtures. The gas sensing behavior with the mixed gas system suggests that specific adsorption and selective activation of the adsorption sites might occur in gas mixtures, and allow selectivity for the adsorption of a particular gas. The careful pattern recognition of sensing data obtained by the sensor array made it possible to distinguish a gas species from a gas mixture and to measure its concentration.

• 한국재료학회지
• /
• 제34권5호
• /
• pp.235-241
• /
• 2024

Gas identification techniques using pattern recognition methods were developed from four micro-electronic gas sensors for noxious gas mixture analysis. The target gases for the air quality monitoring inside vehicles were two exhaust gases, carbon monoxide (CO) and nitrogen oxides (NO_x), and two odor gases, ammonia (NH₃) and formaldehyde (HCHO). Four MEMS gas sensors with sensing materials of Pd-SnO₂ for CO, In₂O₃ for NO_X, Ru-WO₃ for NH₃, and hybridized SnO₂-ZnO material for HCHO were fabricated. In six binary mixed gas systems with oxidizing and reducing gases, the gas sensing behaviors and the sensor responses of these methods were examined for the discrimination of gas species. The gas sensitivity data was extracted and their patterns were determined using principal component analysis (PCA) techniques. The PCA plot results showed good separation among the mixed gas systems, suggesting that the gas mixture tests for noxious gases and their mixtures could be well classified and discriminated changes.