• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.294-302
• /
• 2018

This study was conducted to compare anti-inflammatory effect of Robinia pseudoacacia L. using different extraction methods (water extraction, ethanol extraction and high temperature extraction). We investigated anti-inflammatory effect of Robinia pseudoacacia L. extract (RP1, water extract; RP2, ethanol extract; RP3, high temperature extract) on lipopolysaccharide (LPS)-stimulated inflammation using Raw 264.7 cell. Cells were treated with various concentrations (12.5, 25, 50, 100 or $200{\mu}g/m{\ell}$) of water extract, ethanol extract and high temperature extract. Cytotoxicity was not observed on Raw 264.7 cells, LPS-stimulated production of NO (nitric oxide), $PGE_2$ (prostaglandin $E_2$) and cytokines ($TNF-{\alpha}$, IL-6 and $IL-1{\beta}$) was reduced by RP3 treatment more than RP1 and RP2. In conclusion, these results indicated that inflammation on Raw 264.7 cells was improved by RP3. Treatment of RP3 could be used to natural medicine for improving inflammatory response. However, further experiment is required to observe how the high temperature extraction at $500^{\circ}C$ for 48 h influences on alteration of active ingredient in Robinia pseudoacacia L., and conducts the inflammation signal pathway on Raw 264.7 cells.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.143-150
• /
• 1998

Six field bean (GI-vcine soza S and Z ) plants were examined for their genetic polymorphisms and intraspecific variations using randomly amplified polymorphic DNA(RAPD) markers. In RAPD analysis of 5 random primers (Rp-1, Rp2, Rp-3, Rp-4, Rp-5), 30 of total 155 bands obtained kom 5 primers were polymorphic and sizes of polymirphic band ranged between 0.5 and 3.0 kb. Number of bands amplyfied per primer was varied from 2 to 11 and average number was 6.0. Genetic variation of intraspecies in the samples of six region was ranged behveen 11 to 25 percent, and genetic similarity among intraspecies was ranged from 0.69 to 0.78. In pairwise genetic similarity test of six field bean plants, Mun and Hoj showed highest coefficient of genetic similarity as 0.67, whereas Sin and Hoj was lowest as 0.45. According to the genetic similarity, the level of intraspecific variation is higher than that of regional distance in GI-vcine soza.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.788-794
• /
• 2010

Camellia sinensis L. (green tea) seed oils were prepared by roasting at $213^{\circ}C$ and pressing (RP), pressing (P), and nhexane extraction (H). The physico-chemical properties of the RP, P, and H samples, including fatty acid composition, color, and sensory characteristics were analyzed. RP, P and H samples were thermally oxidized at $180^{\circ}C$, and oxidative stability was determined by DPPH, CDA, and p-AV at 0, 20, 40, 60, and 80 min. Compared to the P and H samples, RP resulted in significantly higher thermal oxidative stability according to the DPPH, CDA, and p-AV results (p<0.05). The ratio of unsaturated fatty acids to saturated fatty acids among RP, P, and H samples were significantly different (p<0.05). The oleic acid and linoleic acid contents in green tea seed oils were 58 and 23%, respectively. Hunter's color value of lightness (L) for the RP, P, and H samples was not significant. Redness (a) of RP was $3.47{\pm}0.119$ and yellowness (b) of H was $60.10{\pm}2.483$, which were significantly different. Compared to RP samples, H and P samples had the highest color and off-odor values in the sensory evaluation. RP samples showed the highest taste value and were significant overall (p<0.05). The thermal stability of RP extraction was more stable than any other method. Camellia sinensis L. seed oil extracted by RP had better sensory characteristics than other edible oils, including soybean oil, grape seed oil, and extra virgin olive oil.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.16-19
• /
• 2001

Rapid Prototyping (RP) and Rapid Tooling (RT) were introduced to reduce time-to-market and cost by shortening not only the development phase but also the production phase of the manufacturing process. RP generally builds up a prototype layer by layer, rapidly generating a fully three-dimensional free form shape. RT enables the manufacture of production tools. The integration of RP and RT has the potential for rapid net shaping of thee-dimensional parts, which have geometrical complexity. In this study, net shaping techniques for making three-dimensional parts using RP and RT are described and a sample part are shown. A three-dimensional metal part is manufactured by a new RP process, Variable Lamination Manufacturing by using Expandable Polystyrene Foam (VLM-S), and its application to RT for making a clover punch. In addition, we discussed the technology fusion between metal forming md RP/RT.

• BMB Reports
• /
• v.44 no.5
• /
• pp.329-334
• /
• 2011

Many proteins with poor transduction efficiency were reported to be delivered to cells by fusion with protein transduction domains (PTDs). In this study, we investigated the effect of levosulpiride on the transduction of PEP-1 ribosomal protein S3 (PEP-1-rpS3), and examined its influence on the stimulation of the therapeutic properties of PEP-1-rpS3. PEP-1-rpS3 transduction into HaCaT human keratinocytes and mouse skin was stimulated by levosulpiride in a manner that did not directly affect the cell viability. Following 12-O-tetradecanoylphorbol-13-acetate (TPA)-induced inflammation in mice, levosulpiride alone was ineffective in reducing TPA-induced edema and in inhibiting the elevated productions of inflammatory mediators and cytokines, such as cyclooxygenase-2, inducible nitric oxide synthase, interleukin-6 and -1${\beta}$, and tumor necrosis factor-${\alpha}$. Anti-inflammatory activity by PEP-1-rpS3 + levosulpiride was significantly more potent than by PEP-1-rpS3 alone. These results suggest that levosulpiride may be useful for enhancing the therapeutic effect of PEP-1-rpS3 against various inflammatory diseases.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.265-270
• /
• 1993

The German cockroach(Blattelia germanica) population~ were successIVely selected with ch\orpyrifos and permethrin during the six generations. The resulting resistant $R_{chtorpenfos}$(Rc) and $R_{permethnn}$(Rp) stra.ins were studied to investigate the esterase activity by spectrophotometer, filter parper test, and electrophoresis. Esterase-$\alpha$ activities by filter paper test showed 2.65 and LBZ times higher in the Rc and Rp strains than the susceptible strain, respectively. ln the spectrophoLometer method, the esterase activit18s to $\alpha$-and $\beta$-naphthyl acetate were increased 2.34 and 5.28 times in the Rc than susceptible strain, and 1.48 and 2.92 times in the Rp Limn susceptible stram, respectlvely. Zymogram patterns of eslerase isozyme by agarose gel electrophoresis showed totally five bands. The Rc and Rp strains showed two additive bands as, Est-2 and Est-3, which were not shown in the susceptible strain. but the Rp strain dId not show Est-5 bands which was COlumon in the Rc and susceptible strams.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.68-74
• /
• 2000

The STL file format is an approximation of 3-D model with triangular facets. STL is a standard input file format of Rapid Prototyping(RP) equipment In computer graphics a circle has been approximated with an inscribed polygon which causes an error between the real and approximated circles. In this study an intersecting polygon has been used to approximate the circle and applied to produce more accurate RP part. The newly proposed method shows it's excellence in part accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.753-756
• /
• 2005

Rapid prototyping (RP) technologies are mainly performed by layered manufacturing (LM) process which manufactures 3D physical objects by depositing 2D sections in a direction. Thus, deformations are apt to occur in overhanging area of the RP processed part. Also, excessive adhesion between part and platform of the RP apparatus is generated. In order to prevent these problems, most of the RP technologies adopt support structure. Main element to support a part in the support structure is strand. In actual field, however, the number of strand is determined by the software operating reference guide or RP system operator's experience. In this paper, a methodology to determine the optimal strand spacing is presented through experiments and measurements for the SL part deformation by change of strand spacing and part weight in the support structure of the stereolithography.

• Journal of Life Science
• /
• v.30 no.3
• /
• pp.298-303
• /
• 2020

This study aimed to investigate possible applications of Rodgersia podophylla in the food and cosmetic industry. Ethanol extracts of leaves (RP-L), branches (RP-B), and root (RP-R) were prepared, and their antimicrobial, antioxidant, and anti-diabetic activities were evaluated. The polyphenol content in the RP-R, RP-L, and RP-B extracts was 79.6, 30.4, and 16.9 mg/g, respectively. An antimicrobial activity assay showed that the RP-L and RP-R extracts exhibited strong growth inhibition of pathogenic and food spoilage Gram-positive bacteria. Furthermore, the RP-R extract inhibited the growth of the Gramnegative E. coli and P. vulgaris bacteria. All extracts showed strong scavenging activity for DPPH, ABTS, nitrite, and reducing power determined by A 700 nm. In particular, the RC₅₀s of the RP-R extract for the DPPH anion and ABTS cation were 23.0-29.7 and 15.0-18.2 ㎍/ml, respectively, which are comparable to those of vitamin C (9.8 and 8.0 ㎍/ml, respectively). An activity assay of α-glucosidase and β-amylase suggested a high potential for the RP-R extract as an anti-diabetic agent. Its inhibition levels of α-glucosidase and β-amylase at 0.5 mg/ml were 6.9 and 48.5%, respectively. This is the first report of the antimicrobial and anti-diabetic activities of R. podophylla. Our results suggest that RP-L and RP-R extracts could be developed as novel cosmeceutical and functional food resources.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1235-1244
• /
• 2002

This paper proposes a group key management protocol for a secure of all the multicast user in PIM-SM multicast group communication. With prosed architect, subgroups for multicast secure group management will be divided by RP (Rendezvous-Point) unit and each RP has a subgroup manager. Each subgroup manager gives a secure key to it's own transmitter md the transmitter compress the data with it's own secure key from the subgroup manager. Before the transmitter send the data to receiver, the transmitter prepare to encrypt a user's service by sending a encryption key to the receiver though the secure channel, after choking the user's validity through the secure channel. As the transmitter sending a data after then, the architecture is designed that the receiver will decode the received data with the transmitter's group key. As a result, the transmitting time is shortened because there is no need to data translation by group key on data sending and the data transmition is possible without new key distribution at path change to SPT (Shortest Path Tree) of the router characteristic. Additionally, the whole architecture size is samller than the other multicast secure architecture by using the conventional PIM-SIM routing structure without any additional equipment.