• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.469-471
• /
• 2005

Paper searches Neighbor Discovery Protocol's IPv6 address AutoConfiguration function that is IPv6's point technology. Also, I study plan to apply Router Advertisement function to Router. Router is formed whole system by Routing Process Card that do manager and Line Card that take charge of Packet Forwarding. Present plan that embody Router Advertisement function to Line Card.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.539-546
• /
• 2008

In this paper, we propose an address autoconfiguration mechanism and a route establishment mechanism appropriate for the modified MANET architecture which overcomes the multi-link subnet problem. For the delivery of Router Advertisement (RA) messages without causing the duplicate packet reception problem in the multi-hop wireless network environment, the Scope-Extended RA (Scope-Extended Router Advertisement) message is defined. Also, by defining the MANET Prefix option, a MANET node is allowed to send packets destined to a host not in the MANET directly to the gateway. This can prevent the performance degradation caused by broadcasting control messages of the reactive routing protocol for route establishment. The performance of the proposed mechanism is analyzed through NS-2 based simulations and, according to the simulation results, it is shown that the proposed mechanism performs well in terms of the control message overhead.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.279-282
• /
• 2007

Typically a wireless sensor network consists of a number of nodes that sense surrounding environment and collaboratively work to process and route the sensing data to a sink or gateway node. We propose an architecture with support of multiple routers in IPv6-based Low-power Wireless Personal Area Network (6LoWPAN). Our architecture provides traffic load balancing and increases network lifetime as well as self-healing mechanism so that in case of a router failure the network still can remain operational. Each router sends its own Router Advertisement message to nodes and all the nodes receiving the messages can select which router is the best router with the minimum hop-count and link information. We have implemented the architecture and assert our architecture helps in traffic load balancing and reducing data transmission delay for 6LoWPAN.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.5
• /
• pp.55-62
• /
• 2012

With the development of mobile communications and Internet technology, there is a strong need to provide seamless and fast connectivity for roaming devices. Generally, the mobile host (MH) may have several available networks when entering a new wireless area. However, the standard of decision for user's internet connection is provided only the subsystem identification (SSID) and signal strength of access point (AP). These two standards could not enough to decide optimal AP to the MH. Therefore, to decide the optimal AP, more information is needed. In this paper, we present additional information such as status of MH, capacity, current load, and depth of network hierarchy, by router advertisement message at layer 3. Also, we proposed decision engine (DE) on the MH that analyzes APs and decides the optimal AP automatically by AP's status information. For the MH, wireless connection period is increased, the power consumption is decreased, and the signaling overhead is reduced. For AP and router, the load balancing is provided and the network topology can also be more efficient.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.439-441
• /
• 2003

사용자의 인터넷 환경이 점차 무선 접속을 통한 인터넷의 사용과 실시간 응용 데이터의 사용이 늘어가는 추세에 따라. 이동 인터넷 서비스를 하기 위한 방안으로 Mobile If와 Mobile IPv6가 제시되었다. 본 논문에서는 Mobile IPv6 환경에서 Neighbor Discovery 중 Router Solicitation과 Router Advertisement가 호스트의 이동성 지원에 미치는 영향을 분석하였다. Neighbor Discovery 메시지들의 주기를 변경하여, 실제 구현, 측정하여 Handoff의 효율성과 전송 대역폭 overhead의 상관관계를 알아보았다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.179-186
• /
• 2012

Nowadays, the multihomed host equipped with multiple network interfaces has been interested research in next generation wireless network, because the mobile users expect that they can be able to access services not only anywhere, at any time and from any network but also simultaneously. This paper addresses the mobility simulation model of the multihomed node for supporting MIPv4 and MIPv6 function in an interworking of Worldwide Interoperability for Microwave Access (WiMAX) and IEEE 802.11 WLAN. The multihomed node with two air interfaces has been developed based on WiMAX and WLAN workstation node model in simulation software. The main point of the developed model is to support both MIPv4 and MIPv6 function, and provide network selection policy for the multihomed node between WiMAX and WLAN network. Based on the received Router Advertisement along with the interface number, we can manage the access interfaces in ordered list to make handover decision while the multihomed node is moving. In the end of this paper, the simulation scenarios and results are shown for testing MIPv4 and MIPv6 function.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.156-164
• /
• 2006

The SCTP (Stream Control Transmission Protocol) implementation with the DAR (Dynamic Address Reconfiguration) extension is called the mSCTP (Mobile SCTP) that is proposed recently for mobility support in transport layer. The mSCTP does not satisfy short handover latency for real-time applications and it has no specific handover decision mechanisms. In this paper, we propose fast handover schemes for mobile nodes that are moving into different subnet using pre-acquisition RA (Router Advertisement) and L3 trigger for improving handover performance. Furthermore, we introduce three specific methods which are RA cache, FMIPv6 (Fast Handovers for Mobile IPv6) and dual interface and how proposed scheme can be interoperated with handover process respectively. Finally, we show two experimental results which are the mSCTP and the mSCTP using FMIPv6 on Linux platforms. Experimental results show that handover performance is improved with reducing the time of receiving RA which takes most of total handover latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.592-599
• /
• 2011

Proxy Mobile IPv6 (PMIPv6) is the network-based mobility management protocol that network supports the mobility of mobile node (MN) on behalf of the MN. In PMIPv6, a multi-homed MN can connect to the PMIPv6 domain by using only one interface even though it has multiple interfaces. It would be efficient when such a multi-homed MN connects to the PMIPv6 domain by using all of its interfaces. If such a multi-homed MN utilizes all of its interfaces, flow mobility can be provided that the MN handovers one or more flows from one interface to another without re-establishing session. In this paper, we propose the flow-based mobility management protocol by considering the intention of the user. The Router Advertisement (RA) message is used in order for the PMIPv6 domain to inform that the MN can utilize the flow mobility. The proposed mechanism is evaluated by analyzing signaling overhead and handover latency, and the numerical results show that the performance is affected by mobility speed of the MN and the failure probability of the wireless link.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.126-133
• /
• 2003

The existing active routing Protocols assume that the active network topology is static or pre-configured. However a dynamic mechanism to route an active Packet according to the network condition is required due to the dynamic characteristic of the active network. As active routing protocols, SLRP and TCOM500 PLAN project have been proposed, but since both of them are based on the assumption of the static topology we can not say that they are dynamic routing protocols in their entirety. Therefore, in this paper, we propose a new active network routing protocol, called AOSPF (Active Open Shortest Path First), which is compatible with the existing IP routing protocol. AOSPF is an extension of OSPF by adding a new LSA (Link State Advertisement) to allow the active network routing. The newly introduced LSA is used to specify whether the corresponding router is an active router or not. and one bit in the OPTION field of an LSA packet is used as the active router indication bit. This way of extending OSPF is similar to the scheme used in the extension of OSPF for multicast, i.e., MOSPF. In this paper, we will present the operation of AOSPF and the way how an active packet is forwarded based on the active network topology information constructed by AOSPF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.628-640
• /
• 2004

The demand for next generation networks can be condensed into always-best-connected, ubiquitous, mobile, all-lP, and converged networks. IPv6 has been introduced for all-IP ubiquitous communications, and vehicles are coming to represent an important communication platform. In this paper. we propose various resource management schemes for in-vehicle mobile networks, which are adaptive to different hardware configurations. We focus on power and wireless bandwidth since they are critical resources for mobile communications. Based on the mobility characteristics of in-vehicle networks, we propose vehicle-aware power saving schemes. The main idea behind these power saving schemes is to adjust mobile router (MR) advertisement interval and binding lifetime. In addition, according to different wireless environments, we propose adaptive bandwidth management schemes using multihoming: best-connected MR selection based on location, and high-data-rate MR selection based on priority By mathematical analysis, it is shown that our schemes save power prominently for both the dormant nodes and active nodes. In addition, simulation results show that proposed multiple mobile router architecture outperforms previous simple redundant router architecture in preserving session and providing sufficient bandwidth.