• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2021-2026
• /
• 2008

Recently, a high speed rail consists of many train coaches and power cars. For keeping the reliable train communication system with train coaches and power cars, train uses the OSI model(Open Systems Interconnection Basic Reference Model) and KTX(Korea Train eXpress) only uses the Physical to Transport layer of OSI model. This paper describes the analysis of CLNP(Connectionless Network Protocol) and ES-IS(End System to Intermediate System) protocols used in KTX for the network layer. CLNP is used to send data to other system and ES-IS protocol is used to route and send information between end systems and intermediate systems. Also this paper presents the protocol parsing program and implementation of Network layer.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.915-917
• /
• 1998

Optimal routing of distribution networks can be attained by keeping the line power capacity limit to handle load requirements, acceptable voltage at customer loads, and the reliability indices such as SAIFI, SAIDI, CAIDI, and ASAI limits. This method is composed of optimal loss reduction and optimal reliability cost reduction. The former is solved relating to the conductor resistance of all alternative routes, and the latter is solved relating to the failure rate and duration of each alternative route. The routing considering optimal loss only and both optimal loss and optimal reliability cost are compared in this paper. The results showed that reliability cost should be considered as well as loss reduction to achieve the optimal routing in the distribution networks.

• Strategy21
• /
• s.39
• /
• pp.140-162
• /
• 2016

The construction of Jeju Naval Base was finally completed and donated to the Republic of Korea Navy on February 26th this year. There is no doubt that the new base will contribute to the substantial augmentation of Korea's naval power and maritime security. However, we should note that the new naval base took a long and hard twenty-three years to be completed. In the 21st century, Korea should adopt a new strategy that can fulfill the security requirements of Korea for the new age of international relations. The 21st century is characterized by globalization, and in the world of globalization, a national boarder has become meaningless. In the late 20th century, after the Cold War, trade between countries have greatly increased and so did the importance of the seas. Having transformed from an agricultural country into a commercial country, Korea went from a continental state to a maritime state. Korea has become the 9th largest trading state, and obviously, the importance of the sea has become significant. Korea's national strategic focus needs to be on the sea for national survival. Thus, since the 1990s, the Korean Navy has planned to build the Jeju Naval Base. Jeju, due to its geopolitical characteristics, is extremely important to the 21st century Korea's economy and national security. Jeju is the starting point of the sea route that reaches out to the world, and at the same time, the ending point of the sea route that heads towards Korea. Jeju is located in the center of Northeast Asia and thus, Jeju Naval Base is extremely important for the area's security and order. Jeju Naval Base will be very useful not only for the maritime security of Korea, but also for keeping peace and order in Northeast Asia. Jeju Naval Base was the minimal effort against the six sea route security threats towards Korea. The six sea route threats are: 1) Threat from North Korea; 2) China's Threat towards Korea's sovereignty; 3) China's treat towards Korea's fishery; 4) Threat from Japan; 5) Threat towards Korea's sea routes; 6) Threat from recent phenomena of isolationism of the United States. Jeju Naval Base is built for both warships and civilian ships--such as cruise ships--to use. Just like the United States' Pearl Harbor, Jeju Naval Base will become not only the largest military base, but a beautiful tourist site.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.485-486
• /
• 2007

Wireless Sensor Networking is state of the art technology that has a wide range of potential applications. Sensor network generally consists of a large number of distributed nodes that organize themselves into a multi-hop wireless network. Each node has one or more sensors, embedded processors and low-power radios, and is normally battery operated because of small size. In this paper wireless sensor networking technology applies to the environment monitoring system in the underground. This system can monitor a pollution level of the underground in realtime for keeping up a comfortable environment.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.403-406
• /
• 2013

This paper describes a simple route to synthesis of water-dispersible monodisperse maghemite (${\gamma}-Fe_2O_3$) nanocrystals using 6-aminohexanoic acid (AHA) as a stabilizer. The water-dispersible ${\gamma}-Fe_2O_3$ nanocrystals with an average size of 5 nm were obtained simply by addition of $Fe(CO)_5$ into an octyl ether solution containing AHA at $195^{\circ}C$ under argon condition. As-prepared AHA coated ${\gamma}-Fe_2O_3$ nanocrystals exhibited highly crystallinity and magnetic property while keeping a good dispersity in an aqueous phase. We also obtained water-dispersible AHA coated ${\gamma}-Fe_2O_3$ nanocrystals using ligand-exchange method, demonstrating that AHA can be a good candidate for preparing water-dispersible uniform metal oxide nanocrystals.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.623-632
• /
• 2005

In ad-hoc network, there is no fixed infrastructure such as base stations or mobile switching centers. The security of ad-hoc network is more vulnerable than traditional networks because of the basic characteristics of ad-hoc network, and current muting protocols for ad-hoc networks allow many different types of attacks by malicious nodes. Malicious nodes can disrupt the correct functioning of a routing protocol by modifying routing information, by fabricating false routing information and by impersonating other nodes. We propose a routing suity mechanism based on one-time digital signature. In our proposal, we use one-time digital signatures based on one-way hash functions in order to limit or prevent attacks of malicious nodes. For the purpose of generating and keeping a large number of public key sets, we derive multiple sets of the keys from hash chains by repeated hashing of the public key elements in the first set. After that, each node publishes its own public keys, broadcasts routing message including one-time digital signature during route discovery and route setup. This mechanism provides authentication and message integrity and prevents attacks from malicious nodes. Simulation results indicate that our mechanism increases the routing overhead in a highly mobile environment, but provides great security in the route discovery process and increases the network efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.821-828
• /
• 2011

This paper developed the algorithm for improving the performance the auto pilot in the autonomous vehicle system consisting of the Track keeping control, the Automatic steering, and the Automatic mooring control. The automatic steering is the control device that could save the voyage distance and cost of fuel by reducing the unnecessary burden of driving due to the continuous artificial navigation, and avoiding the route deviation. During the step of the ship autonomic navigation control, since the wind power or the tidal force could make the ship deviate from the fixed course, the automatic steering calculates the difference between actual sailing line and the set course to keep the ship sailing in the vicinity of intended course. first, we could get the transfer function for the modeling of ship according to the Nomoto model. Considering the maneuverability, we propose it as linear model with only 4 degree of freedoms to present the heading angle response to the input of rudder angle. In this paper, the model of ship is derived from the simplified Nomoto model. Since the proposed model considers the maximum angle and rudder rate of the ship auto pilot and also designs the Fuzzy controller based on existing PID controller, the performance of the steering machine is well improved.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.201-211
• /
• 2009

The types and quantities of Hazmat and Hazmat transportation are gradually increasing, keeping pace with industrialization and urbanization. At present the safety management for Hazmat transportation only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Thus the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method is invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management on Hazmat transportation in railway industries can be suggested. (1st step: building up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP). In conclusion, those 7 steps are used as a standardization method of optimum transportation routing. And to increase the efficiency of optimum transportation routing, optional route can be revise by verification.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.118-125
• /
• 2015

According to the children's crime risk is increased, national police agency has implemented child safety keeper system since 2009. Despite the importance of child safety keeper studies, there was no seeking of empirical research and development plan for the operation. The purpose of the study is to find ways to improve the effectiveness of the child safety keeper system. To achieve the research objectives, all the child safety keepers were surveyed by quota sampling in the 16 provincial police agency. Questionnaire analyzed by frequency analysis, t-test, Avova, multiple regression analysis. The result of analysis is the need to strengthen links with child safety keeping house, participatory setting for the patrol route, the improvement of education management and supervision, adequacy of allowance, strengthening contact with children for job success awareness.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.6.2-6.2
• /
• 2010

Stainless steel is widely known to have superior corrosion properties. However, in some harsh conditions it still suffers various kinds of corrosions such as galvanic corrosion, pitting corrosion, intergranular corrosion, chloride stress corrosion cracking, and etc. For the corrosion protection of stainless steel, the ceramic coatings such as protective silica film can be used. The sol-gel coating technique for the silica film has been extensively studied especially because of the cost effectiveness. It has been proved that silica can improve the oxidation and the acidic corrosion resistance of metal surface in a wide range of temperatures due to its high heat and chemical resistance. However, in the sol-gel coating process there used to engage a heat treatment at an elevated temperature like $500^{\circ}C{\sim}600^{\circ}C$ where cracks in the silica film would be formed because of the thermal expansion mismatch with the metal. The cracks and pores of the film would deteriorate the corrosion resistance. When the heat treatment temperature is reduced while keeping the adhesion and the density of the film, it could possibly give the enhanced corrosion resistance. In this respect, inorganic protective silica film was tried on the surface of stainless steel using a sol-gel chemical route where silica nanoparticles, tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) were used. Silica nanoparticles with different sizes were mixed and then the film was deposited on the stainless steel substrate. It was intended by mixing the small and the large particles at the same time a sufficient consolidation of the film is possible because of the high surface activity of the small nanoparticles and a modest silica film is obtained with a low temperature heat treatment at as low as $200^{\circ}C$. The prepared film showed enhanced adhesion when compared with a silica film without nanoparticle addition. The films also showed improved protect ability against corrosion.