• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.933-941
• /
• 2010

한국철도공사는 비수익 노선과 해당 노선의 운행 열차에 대한 폐지를 통해 수익성을 개선하고 있다. 그 일환으로 통근열차 구간이 다수 폐지되었으며 현재는 경의선과 경원선의 통근열차 노선만이 운영 중에 있다. 그러나 지역 주민들의 열차운영 요청이 여전히 존재하는 바, 이에 기존의 단순한 통근열차로서의 기능에서 한단계 더 진행하여 KTX와의 연계를 꾀할 수 있는 Local선 운영 정책이 필요하다. 본 연구에서는 전체적인 과거 통근열차의 운영정책과 성과와 기존 운영정책의 문제점을 고찰한 후 외국의 고속철도와 연계한 적자 로컬선의 운영정책을 분석하고 호남선 인근 도시로 지역을 축소하여 익산-전주간 연계셔틀에 도출된 발전방향을 적용하고자 한다.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.95-101
• /
• 2001

In a route plan, the route selection is a complicated problem to consider the spatial distribution and influence through overall related data and objective analysis on the social, economic and technical condition. The developed system in this study was compared and estimated by deciding a practical section for its validity and efficiency. Using Geographic Information System (GIS), the various information required for route selections in database was constructed, the characteristics of subject area by executing three-dimensional terrain analysis was grasped effectively, and the control point through buffering, overlay and location operation was extracted. An optimum route was selected by calculating the sum of alternatives to the sub-criteria weight, and from this result, there is a difference between real route and proposed route according to the prioritization of decision criteria based on the importance. This research could be constructed and applied geospatial information to the reasonable route plan and an optimum route selection efficiently using GIS. Therefore, the applications are presented by applying Analytic Hierarchy Process (AHP) to the decision-making of information needed in route selection.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.29-37
• /
• 2017

To estimate pollution sources in the watershed with various industries, the simulation of contamination route and distribution of 2-methyl-4,6-dinitriophenol(DNOC) were performed with a numerical model Hydro Geo Sphere. This study was performed calculations of the load using the measured concentration and simulated flow rate. And, the river was divided by the sampling sites at the mainstream, and the contribution rate at downstream sampling sites was calculated for each section. The results showed the concentration of the downstream sampling sites were decided by the concentration of upstream sites, and the contribution rates of the tributaries were calculated below 10%. The results also showed that the impact of the potential sources in Section 1(Geumho1 ~ Geumho2) and Section 5(Geumho5 ~ Geumho6) was larger than in the other area. In Section1 and Section5, It seemed to require detailed investigation.

• 한국도로학회논문집
• /
• 제8권4호
• /
• pp.159-179
• /
• 2006

도로의 구조 시설기준에 관한 규칙과 국도의 노선계획 설계지침에 준하여 실행되는 현행 노선선정방법과, 컴퓨터 발전과 함께 국내외에서 연구되고 있는 선형최적화 모형식으로 사례연구 구간의 도로 노선을 선정하여 노선 특성을 비교 분석해본 결과, 현행 노선선정방법은 단계별, 구간별로 순차적인 노선선정이 이루어지는 국지적 최적을 추구하나, 선형 최적화 모형식 선정방법은 모든 설계요소가 동시에 고려된 체계최적(System Optimal)의 노선탐색 능력이 있는 것으로 분석되었다. 또한 선형최적화 모형에서 기존 설계공종별 실제공사비로 비용함수를 보정하여 노선을 선정한 결과 현실에 부합되게 설계되었으며, 경제성이 높은(B/C=1.66) 대안 노선이 탐색되었다. 선형최적화 설계모형은 터널 종단에서 종단 경사가 변화하는 등 보완될 점이 있음에도 타당성조사와 기본설계단계에서 노선선정 도구로서 설계시간 및 비용단축, 다양한 대안 노선의 검토 등의 많은 장점을 지니고 있음이 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.234-236
• /
• 2007

Even though the existing train route controlling method, using track circuits, ensures the sufficient number of operation, it still has problems such as discordance between train numbers which was planned for operating and train numbers being operated on the track, and allowing only one train entering for one route. To solve those problems, we study and develop the Smart train route controlling system which uses the real-time informations of train positions. This system enables improve the coefficient of utilization in a certain train route controlling section, and the safety level of train route controlling, but we should ensure satisfying reliability of data about tracks operated by trains. In addition, there is a need to protect accidents caused by erroneous information of train position, by reflecting changes of tracks, for example maintenance, improvement, expansion of tracks. In this paper, we describes data structure of a developed program which required to change CAD files to wiring diagrams and to generate them to data of tracks. And we show the result that the simulator, using the data structure, controls speed and route of trains without problems.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.891-897
• /
• 2021

In this paper, we propose a destination optimal route algorithm for providing route finding service for the transportation handicapped by using the multi-criteria decision-making technique and the modified A-STAR optimal route search algorithm. This is a method to set the route to the destination centering on safety by replacing the distance cost of the existing A-STAR optimal route search algorithm with the safety cost calculated through AHP/TOPSIS analysis. To this end, 10 factors such as road damage, curb, and road hole were first classified as poor road factors that hinder road driving, and then pairwise comparison of AHP was analyzed and then defined as the weight of TOPSIS. Afterwards, the degree of driving safety was quantified for a certain road section in Busan through TOPSIS analysis, and the development of an optimal route search algorithm for the transportation handicapped that replaces the distance cost with safety in the finally modified A-STAR optimal route algorithm was completed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1741-1745
• /
• 2007

Even though the existing train route controlling method, using track circuits, ensures the sufficient number of operation, it still has problems such as discordance between train numbers which was planned for operating and train numbers being operated on the track, and allowing only one train entering for one route. To solve those problems, we study and develop the Smart train route controlling system which uses the real-time informations of train positions. This system enables improve the coefficient of utilization in a certain train route controlling section, and the safety level of train route controlling, but we should ensure satisfying reliability of data about tracks operated by trains. In addition, there is a need to protect accidents caused by erroneous information of train position, by reflecting changes of tracks, for example maintenance, improvement, expansion of tracks. In this paper, we proposes and describes a developed program which required to change AutoCAD files to wiring diagrams, to generate them to data of tracks, to identify errors of those data, to construct the structure of necessary resource(s) for sub-systems of a train control system, and to provide simulations of data structure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.151-156
• /
• 2008

The after 1974 capital region electric railroad is opened to traffic Koraill and Seoul metro adopt each other different power supply method and they operate and they are come. AC 25[kv] method voltage the insulation becomes larger standing distance highly, the case tunnel section which will introduce in the underground segment becomes on a large scale and the cost of construction increases to the city center and the underground segment adoption of DC method was many. To recent times with R-bar (Rigid-bar) introductions change of tunnel section the introduction of AC method came to be easy without in the underground segment. Operates sees in the electric protection where the Seoul metro and the Korail are different each other and, from the dead section segment the interior electric light to put out lights the passenger brings about inconveniently and the civil appeal which demands a power supply method unification occurs, within the company interchange electric railroad brazier safety improvement and maintenance expense curtailment etc. the flaw is original proposal, is a condition which finishes a feasibility study service about the power supply method fringe land. Interchange analysis of the DC electric railway it leads from the present paper and it compares under analyzing being it could be reflected to also the route which is in the process of actual using boil the strong point and a weak point of DC and AC method of the establishment route constructive at the time of and

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.38-39
• /
• 2019

선박의 최적 항로 계획은 주어진 해양 환경에서 운항 시간 혹은 연료 소모량을 최소로 하는 항로 계획이다. 대양을 운항하는 선박의 최적 항로에 관한 기존 연구와 다르게, 본 연구에서는 연안에서 좌초 위험을 회피하는 선박의 항로 계획을 위한 최적화 방법을 제안하였다. Dijkstra 알고리즘을 사용하여 항로의 변경 지점을 찾고, 최적화 설계 변수를 엔진 회전수로 설정하여 연료 소모량이 최소가 되도록 최적화를 수행하였다. 엔진 회전수를 설정하는 방법은 출발지에서 도착지까지 고정 회전수로 설정하는 방법과 구간을 나누어 구간별 고정 회전수를 설정하는 방법을 사용하였다. 항로 탐색을 위해 고려한 해양 환경 요소는 바람, 파고, 조류이며 좌초 위험을 계산하기 위해 수심 정보를 사용하였다. 본 연구에서 제안한 방법을 목포와 제주를 오가는 선박을 대상으로 적용하여 최적의 항로를 결정하였으며, 최적 항로를 기존에 항해했던 항로와 비교하여 연료 소모량이 절감된 것을 확인하였다.

• 한국철도학회논문집
• /
• 제11권6호
• /
• pp.550-561
• /
• 2008

본 연구에서는 도시권역의 대중교통수단과는 여러 가지 측면에서 차별화 되는 지역 간 철도의 특징을 반영한 대중교통 통행배정모형을 제시하였다. 경로구간 기반으로 대중교통 네트워크를 확장하고, 경로구간을 운행하는 노선의 선택확률을 통행배정모형 내에서 결정하는 것이 아닌 외부적으로 결정하는 방식을 적용하여, 직접 네트워크를 확장하는 방법보다 네트워크 확장 규모를 줄일 수 있었다. 지역간 철도의 특징을 반영할 수 있도록 적정한 가정을 통해서 경로구간 기반의 결정적 대중교통 통행배정모형과 해법을 제시하였다. 현실을 최대한 반영한 소규모 네트워크에서 기존의 대표적인 대중교통 통행배정모형과 비교한 결과 본 연구에서 제시한 모형의 예측력이 우수한 것으로 분석되었다.