• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.453-458
• /
• 2013

Aside from the issues like energy saving and maximizing network lifetime. WMSN has another issue to deal with: support of quality of service(QoS) which is required especially for handling real-time data such as object tracking and data gathering. This paper proposes a multipath routing algorithm considering the distance to sink node, energy level and link quality of neighbour nodes. Proposed algorithm supports multipath routing path with high quality links. Hence it helps to reduce a power consumption concentration that happens in particular set of nodes along the frequently selected route. It also specifies a service quality pattern and a service quality level depending on traffic pattern. By doing this, the proposed algorithm can realize a differentiated service with QoS guaranteed data transmission.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.203-216
• /
• 1999

This paper describes a set of multi-pathway models for estimating health risk to lead. The models link concentrations of an environmental contaminant (lead) in air, water and food to human exposure through inhalation, ingestion, and dietary routes. Exposure is used as the foundation for predicting risk of health detriment within the population. The process of estimating exposure using often limited data and extrapolating to a large diverse population requires many assumption, inferences, and simplification. This paper is divided into four section. The first section provides lead contaminant levels on obtaining environmental concentration of air, tap water, and foods. The second section provides a discussion of exposure parameters and uncertainty associated predicting human health risk of contaminants. The third and fourth section illustrate lifetime average daily exposure (LADE) and excess cancer risk (ECR) based on exposure parameters. The relationship between concentration of lead in an environmental medium and human exposure is determined with pathway exposure factors (PEFs). The calculation of LADE and ECR is carried out using Monte-Carlo simulation with probability density function of exposure parameters. Examination of the result reveals that, for lead exposure, ingestion (food) is the dominant route of exposure rather than inhalation (air), and ingestion (tap eater).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.2
• /
• pp.209-218
• /
• 2009

In a wireless sensor network(WSN) each sensor node deals with numerous sensing data elements. For the sake of energy efficiency and network lifetime, sensing data must be handled effectively. A technique used for this is data aggregation. Sending/receiving data involves numerous steps such as MAC layer control packet handshakes and route path setup, and these steps consume energy. Because these steps are involved in all data communication, the total cost increases are related to the counts of data sent/received. Therefore, many studies have proposed sending combined data, which is known as data aggregation. Very effective methods to aggregate sensing data have been suggested, but there is no means of deciding how long the sensor node should wait for aggregation. This is a very important issue, because the wait time affects the total communication cost and data reliability. There are two types of data aggregation; the data counting method and the time waiting method. However, each has weaknesses in terms of the delay. A hybrid method can be adopted to alleviate these problems. But, it cannot provide an optimal point of aggregation. In this paper, we suggest a stochastic-based data aggregation scheme, which provides the cost(in terms of communication and delay) optimal aggregation point. We present numerical analysis and results.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.31-40
• /
• 2009

What are important in wireless sensor networks are reliable data transmission, energy efficiency of each node, and the maximization of network life through the distribution of load among the nodes. The present study proposed DSPR, a dynamic unique path routing machanism that considered these requirements in wireless sensor networks. In DSPR, data is transmitted through a dynamic unique path, which has the least cost calculated with the number of hops from each node to the sink, and the average remaining energy. At that time, each node monitors its transmission process and if a node detects route damage it changes the route dynamically, referring to the cost table, and by doing so, it enhances the reliability of the network and distributes energy consumption evenly among the nodes. In addition, when the network topology is changed, only the part related to the change is restructured dynamically instead of restructuring the entire network, and the life of the network is extended by inhibiting unnecessary energy consumption in each node as much as possible. In the results of our experiment, the proposed DSPR increased network life by minimizing energy consumption of the nodes and improved the reliability and energy efficiency of the network.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.133-140
• /
• 2007

Currently, as the requirement for high quality Internet access from anywhere at anytime is consistently increasing, the interconnection of pure ad hoc networks to fixed IP networks becomes increasingly important. Such integrated network, referred to as hybrid ad hoc networks, can be extended to many applications, including Sensor Networks, Home Networks, Telematics, and so on. We focus on some data communication problems of hybrid ad hoc networks, such as broadcasting and routing. In particular. power failure of mobile terminals is the most important factor since it affects the overall network lifetime. We propose an energy-efficient routing protocol based on clustering for hybrid ad hoc networks. By applying the index-based data broadcasting and selective tuning methods, the infra system performs the major operations related to clustering and routing on behalf of ad hoc nodes. The proposed scheme reduces power consumption as well as the cost of path discovery and maintenance, and the delay required to configure the route.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.600-605
• /
• 2014

The interest in development on luminaires which are available up to $-52^{\circ}C$ is surging as demands in vessels navigating a north pole route increase. A conventional incandescent lamp used in vessels is operated stably at $-52^{\circ}C$, but many countries including Korea have eliminated the use of incandescent lamps gradually because of its low luminous efficacy. In this paper, therefore, to develop the LED luminaires with high-efficiency, long lifetime that enables to substitute for incandescent lamp, it has studied about cryogenic characteristics of LED packages, bulbs, driving circuit and power supply. This experiments were carried out according to standards IEC 60945-8.4.1. Temperature range is from $-60^{\circ}C$ to $25^{\circ}C$, and the light output depending on ambient temperature. It showed that, based on $25^{\circ}C$, light output of a CFL decreased by 80% of CFL at $-20^{\circ}C$ while each increased 12% of LED bulbs and 16~19% of LED packages at $-60^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.495-502
• /
• 2013

In the mobile Ad hoc Network(MANET), improving technique for management and control of topology is recognized as an important part of the next generation network. In this paper, we proposed an efficient node life time management of ATICC(Adaptive Time Interval Clustering Control) in Ad-hoc Networks. Ad-hoc Network is a self-configuration network or wireless multi-hop network based on inference topology. This is a method of path routing management node for increasing the network life time through the periodical route alternation. The proposed ATICC algorithm is time interval control technique depended on the use of the battery energy while node management considering the attribute of node and network routing. This can reduce the network traffic of nodes consume energy cost effectively. As a result, it could be improving the network life time by using timing control method in ad-hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10B
• /
• pp.619-629
• /
• 2005

In this paper, we propose energy-aware routing schemes which are simple enough to be applicable to the wireless sensor networks. The one hop upstream no de in direction of the base-station is determined in four different ways based on the energy information of neighboring nodes, which are obtainable via the process of self-organization of the network. The fair distribution of the energy consumption over all the possible routes to the base-station is one of the design objectives. Also, an alternate route search mechanism is proposed to cope with the situation in which no routing information is available due to lack of remaining energy of the neighboring nodes. The mechanism turns out to be a supplementary scheme to improve the energy efficiency. Lots of simulations are performed to examine the performance metrics such as the energy efficiency, throughput, network lifetime, and the transmission latency of the proposed schemes. Simulation results show the feasibility of the simple routing schemes for the sensor networks.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.215-219
• /
• 2005

Generally, the mobile nodes in MANET have the limited power capacity available for actual communications. Thus, the power management is very important for packet routing or forwarding. Although MTPR, MBCR and MMBCR are proposed to treat the problem of power consumption, there have been few researches resolving the link breakdown that is occurred by the power exhaustion during transmission. In this sense, the reliable scheme should be required to ensure the routing connectivity. In this paper, we propose three schemes to enforce the routing connectivity. If the signal strength is dropped below a signal threshold, the candidate route is previously selected to prepare the link breakdown. Also, on multi-channel, we propose the lifetime increment scheme of a node that it manage its available power to the needed power of a new link. The simulation results show the enforcement of the link connectivity and the performance improvements of the delay time through the effective connection management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4411-4431
• /
• 2014

Mobile ad hoc networks (MANETs) have recently gained increased interest due to the widespread use of smart mobile devices. Group communication applications, serving for better cooperation between subsets of business members, become more significant in the context of MANETs. Multicast routing mechanisms are very useful communication techniques for such group-oriented applications. This paper deals with multicast routing problems in terms of stability and scalability, using the concept of stable core. We propose LMRSC (Lightweight Multicast Routing Based on Stable Core), a lightweight multicast routing technique for MANETs, in order to avoid periodic flooding of the source messages throughout the network, and to increase the duration of multicast routes. LMRSC establishes and maintains mesh architecture for each multicast group member by dividing the network into several zones, where each zone elects the most stable node as its core. Node residual energy and node velocity are used to calculate the node stability factor. The proposed algorithm is simulated by using NS-2 simulation, and is compared with other multicast routing mechanisms: ODMRP and PUMA. Packet delivery ratio, multicast route lifetime, and control packet overhead are used as performance metrics. These metrics are measured by gradual increase of the node mobility, the number of sources, the group size and the number of groups. The simulation performance results indicate that the proposed algorithm outperforms other mechanisms in terms of routes stability and network density.