• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.181-190
• /
• 2010

The purpose of this study is to propose an effective approach of making route decisions for the large-scale national project (i.e. the KTX Gyeongbu line between Daegu and Busan) by analyzing the conflicts that had occurred in the process of selecting the routes and stations. This study investigated policy making processes and conflicts during the construction of the KTX Gyeongbu line. The five contentious issues were 1) selecting the route between Daegu~Busan line, 2) developing a new route through Gyeongju areas, 3) making decisions of the first and second phases of construction, 4) setting up an extra station in Ulsan, and 5) conflicts of the Mt. Cheonseong route in Yangsan. In terms of analyzing these issues, the current study focuses on dealing with notions of technical, economical, legal, social, and practical rationality. Based on such analyses and implications, this study proposes a relatively reasonable model of line decision making especially for long-distance intercity routes. It also turns out that the large-scale project like the development of KTX Gyeongbu line should be conducted after receiving enough quantitative evaluation by reviewing relevant technical research studies and economic analyses, and having social agreements to prevent plausible conflicts.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.739-744
• /
• 2013

Recently, railroad construction becomes an alternative considering environmental merits such as mass transportation, safety, economy and energy efficiency. Also railroad can have 3 to 4 times better in economy compared to road construction. However, long line and unavoidable sensitive areas hinders railroad construction often resulted in ecosystem degradation. This paper reviewed 27 cases of EIS submitted during 2003-2006 and reviewed major issues on Animal-Plants and Landscape. Noise-Vibration (13.5%), Water Quality (13.5%), Wastes (10.8%) appeared to be most frequent factors to supplement. Route selection in the railroad is the most sensitive issues so that public participation and hearing should be involved in the early stage of the process and social and cultural factors also must be considered to make a final decision on the railroad route location and selection.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.623-629
• /
• 2010

A geographical routing protocol is typically utilized for a route selection of VANET. Even if it is conceptually well adapted into VANET, message delivery tends to be unreliable with frequent network partitions, which mainly come from the inherent characteristics such as high mobility and irregular traffic density. In this paper, we deal with a method to enable reliable message delivery with reflecting the traffic density on routing decision. By concatenating the message delivery cost of each of inbetween junction section, $1^{st}$ and $2^{nd}$ shortest paths are initially determined. When it is not possible to deliver the message on a junction on the 1st path, we utilize two novel ideas, that is, letting the message stay on the junction to find out a new relay node, and putting a replicated copy to reach via a detour path. By using the NS-2 network simulator, our method has been examined in terms of message delivery rate and delay. It shows that our method is much efficient than the other method in the low density environment, while it brings similar results in the high density environment.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.727-732
• /
• 2002

This study is to develop the model of alignment optimization based on design criteria by approaching through alignment of railway design and problems in economy, environment and technology for satisfying traffic volume of the main roads caused by economical and social developments. Now, Geographic Information System isn't applied when designing a present railway in home. And the design of railway alignment is still set on importance of transition curves and cant according to passenger comfort in abroad so tile study of railway alignment is at initiation phase so far. This paper is about decision of optimal alignment between two stations such as starting point and ending point automatically using GIS in optimization of railway alignment. A route between Sungsan city and Shinpung city is the training area and the study compared and evaluated optimal railway route by GIS automatically with present railway route designed. Present optimal fomulas was used in this study for optimization of railway alignment. The model of optimization of railway alignment was developed through topographical elements and it was mentioned by the model of road alignment because of the similarity in design of alignment. But the design of lateral track irregularities, cant fur passenger comfort and motion sickness fellowed by train rolling have to be considered more. Anyway, this study farmed the basis of using GIS and the study should be keep going on in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.287-289
• /
• 2014

선박의 선위 추측(DR, Dead Reckoning)은 수신되거나 측정된 위치 데이터와 속력, 침로 데이터만을 반영하여 계산하므로 대양의 항해나 연근해의 해역에서는 유효할 수 있으나 침로의 변경과 선속의 변화가 잦은 항계 내의 조선에 있어서는 적용이 어렵다는 문제점이 있다. 본 논문에서 제안하는 선박의 추측위치(DRP, Dead Reckoning Position)는 선박의 운항 패턴에 따라 항계 내의 항적 데이터를 수집하고, 수신된 위치 데이터와 속력, 침로 데이터를 점장위도항법(Mercator Sailing)을 통하여 계획항로(Planned Route)의 각 변침점(WP, Waypoint)간 침로(Course)와 항정(Ship's Passage)에 반영하였다. 제안된 추측위치 산출방법을 통하여 항계 내의 조선과정에서 계획항로를 선박의 추측위치와 결합하여 특정 시간 후의 상황패턴을 미리 예측하고 관제사의 의사결정에 기여하고자 한다.

• Korean Management Science Review
• /
• v.17 no.2
• /
• pp.55-65
• /
• 2000

This paper addresses a problem of machining route selection in multi-stage process with machine group. This problem is considered the subcontracting and the production in-house such as regular and overtime work. the proposed model is formulated as a 0-1 integer programming constraining the avaliable time of each machine for planning period and total overtimes. The objective of the model is to minimize the sum of processing cost, overtime cost, and subcontracting cost. To solve this model, a genetic algorithm(GA) approach is developed. The effectiveness of the proposed GA approach is evaluated through comparisons with the optimal solution obtained from the branch and bound. In results, the same optimal solution is obtained from two methods at small size problem, and the consistent solution is provided by the GA approach at large size problem. The advantage of the GA approach is the flexibility into decision-making process because of providing multiple machining routes.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.4
• /
• pp.44-52
• /
• 2016

The departure flow management is the planning tool to optimize the schedule of the departure aircraft and allows them to join smoothly into the overhead traffic flow. To that end, the arrival time prediction to the merge point for the cruising aircraft is necessary to determined. This paper proposes a trajectory prediction model for the cruising aircraft based on the machine learning approach. The proposed method includes the trajectory vectored from the procedural route and is applied to the historical data to evaluate the prediction performances.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.119-124
• /
• 2005

Decision of operation performance mode to minimize the energy consumption of urban rail vehicle. This paper analyses how much acceleration and deceleration of urban rail vehicle should be applied andhow to choose an operation mode to minimize energy consumption when train runs between station within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verify the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between Dolgogee-Sukgye section of Seoul Metropolitan Subway Line 6.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.249-263
• /
• 1997

This paper addresses the parts route selection and economic design in flexible manufactuirng system (FMS). Parts are processed through several stage workstations according to operation sequences. The machine of each workstation can do multiple operation functions. And the operation stage of a part can be processed in several workstations, which are non-identical in functional performance. The objective of this paper is to determine the processing routes of parts, number of machine at each workstation, number of vehicle and makespan time. Two models are suggested. One is assumed that the operation stage of parts can be processed at the only one among several available workstations. Other is assumed that the operation stage of parts is allowed to be processed at several workstations. Parts are transported by automated guided vehicles (AGVs). The decision criteria is to minimize the sum of processing cost, travel cost, setup cost and overhead cost. The formulation of models is represented. A solution algorithm is suggested, and a numerical example is shown.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.283-289
• /
• 2003

This paper proposes an expert system which can determine automatically the shunting routes corresponding to the given shunting works by considering totally the train operating environments in the station. The expert system proposes the multiple shunting routes with priority of selection based on heuristic search strategy. Accordingly, system operator can select a shunting route with the safety and efficiency among the those shunting routes. The expert system consists of a main inference engine and a sub inference engine. The main inference engine determines the shunting routes with selection priority using the segment routes obtained from the sub inference engine. The heuristic rules are extracted from operating knowledges of the veteran route operator and station topology. It is implemented in C computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique. And, the validity of the builted expert system is proved by a test case for the model station.