• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.161-164
• /
• 2010

The surface roughness of wheels and rails are known to be major contributory factors in wheel-rail rolling noise. Generally, the rail roughness was greater than the wheel roughness. Generally, rolling noise sizes and noise level in compliance with wheel/rail roughness almost are reported with the fact that is similar. Rolling noise important factors rightly being in compliance with roughness of contact point regions of the wheel/the rail, presented from the present paper.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.53-61
• /
• 1996

A clear understanding of the surface formation mechanism due to cutting is very important to help produce a good quality surface. Much of the roughness along the length of a bar being cut in a lathe can be explained in terms of macroscopic tool shape and feed rate. However, the roughness along the direction of cutting requires a different explanation. The formation of surface roughness is a problem in flow and fracture of materials in the vicinity of the tool edge. On a microscopic scale the cutting edge is rounded because it is impossible to grind a perfectly sharp cutting edge. Even if a perfectly sharp cutting edge were obtained it would soon become dull as a result of rapid breakdown and wear of the cutting edge. A research project is proposed in which in the main object is to model the surface formation mechanism due to cutting. The tool was assumed to be dull, that is, its edge has a finite radius. In order to study the effect of the radius of cutting edge on the surface formation, tools having different cutting edges were used. For orthogonal cutting experiment, cast iron and glass were chosen as brittle materials. Plowing forces acting in the cutting edge were estimated and its effect on the surface roughness was studied by observing the machined surface using optical microscope.

• Tribology and Lubricants
• /
• 제27권6호
• /
• pp.293-301
• /
• 2011

Understanding of the tribological characteristics of polytetrafluoroethylen (PTFE) and ultra-high-molecular-weight polyethylene (UHMWPE) is crucial for their applications such as bearing and total joint replacement. In this work, the effect of the surface roughness of carbon steel on the tribological behaviors of PTFE and UHMWPE was experimentally investigated by using block-on-ring tribotester with friction force monitoring capability. It was found that that the amount of material transfer layers of PTFE formed on the carbon steel was significantly larger than those of UHMWPE, which was responsible the lower friction coefficient of PTFE. It was also concluded that the effect of surface roughness of carbon steel on the friction coefficient of UHMWPE was more significant than that of PTFE. For UHMWPE, it was found that the effect of surface roughness of counterface was varied with respect to applied normal force and sliding as well. Based on Archard's wear law, the wear coefficient of PTFE and UHMWPE was calculated to be $3{\times}10^{-5}$ ~ $8{\times}10^{-5}$ and $7{\times}10^{-6}$ ~ $2{\times}10^{-5}$, respectively.

• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.346-362
• /
• 2009

본 연구는 광섬유센서를 이용하여 표면조도의 간이 비접촉 측정기를 개발하는데 목적이 있다. 광섬유 센서의 장점은 우수한 고속 응답성, 자기의 무영향, 제작의 편이성이다. 광섬유센서 표면조도 측정 원리는 측정물의 표면조도에 따라 반사되는 광의 세기와 기지의 표면조도 값을 일대일 대응시키는 것이다. 반사광의 세기는 센서 프로브로부터 표면까지의 거리와 표면조도에 따른 반사한계각에 따라 결정되는데 본 연구에서는 표면까지의 거리를 일정하게 하여 표면조도에 따른 반사한계각만을 가지고 표면조도가 결정되도록 측정 프로브를 제작하였다. 측정 시스템은 발광부, 수광부과 신호처리부로 구성되었다. 이 실험에서 사용된 표준 측정 재료는 SM45C, STS303과 Al60이었다. 연구결과 첫째, 재료에 따른 표면조도와 센서출력의 상관관계로부터 근사표면조도식을 도출하고 임의 가공된 시료의 표면조도 측정을 통해 근사표면조도식이 유효함을 입증하였다. 둘째, 실제 제작한 간이 광섬유센서 표면조도 측정기가 유용함을 입증하였다.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.539-546
• /
• 2010

본 연구에서는 격자볼츠만 방법(LBM)을 이용하여 미소채널 내의 유동이 완전 발달 층류유동일 때, 미소채널 내에서의 표면 거칠기 영향에 대하여 수치계산을 수행하였다. 미소채널 내에서 표면 거칠기의 영향을 분석하기 위하여 표면 거칠기의 높이($\varepsilon$), 폭(w), 간격(s)을 조절하여 미소채널에서의 마찰계수(f), 포와이즈수(Po)와 거시적 이론값과 비교하였다. 미소채널에서의 표면 거칠기의 높이가 증가함에 따라 거시적 이론값(Po=24)에 비해서 수치해석으로부터 예측된 값($25{\leq}Po{\leq}29$)이 높게 나타났으며, 표면 거칠기의 폭과 간격은 표면 거칠기의 높이에 비해 미소채널 내부 유동의 변화에 큰 영향을 주지 않는 것을 알 수 있었다. 이 결과로부터 미소채널 내부 유동에서는 표면 거칠기의 영향으로 거시적 층류유동과는 다른 유동현상이 나타난다는 것을 알 수 있었다.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.689-696
• /
• 1997

This paper discussed effect of the surface roughness and the hydrophobicity of support material on the microbial attachment In a rotating biological contactor. The by- drophoblclty of each support material was determined by the measurement of contact angle of water and the surface roughness was measured by the surface roughness In- strument. Microorganisms have well attached on the surface of more hydrophilic support material like Nylon6 than that of the hydrophobic support material like PE. When the relatively hydrophilic surface was roughen, the microbial attachment was increased but when the relatively hydrophobic surface was roughen, the attachment was slightly In- creased because the hydrophobicity of support material was Increased by roughening the hydrophobic surface. Although both variables, the surface hydrophobicity and the surface roughness, have Influenced the microbial attachment, the influence of the surface roughness overruled that of the surface hydrophobicity. Support material whose surfaces were roughened about 1mm, 6mm and 11mm were allowed for attached 3, 7 and 24hr, but the differences of maximum and minimum attachment of each material gave nearly constant values and similar trend with time.

• Wind and Structures
• /
• 제19권6호
• /
• pp.585-601
• /
• 2014

The effect of multiple roughness changes close to a building site was examined through three dimensional computational fluid dynamics (CFD) simulations conducted in a virtual boundary layer wind tunnel (V-BLWT). The results obtained were compared with existing wind speed models, namely ESDU-82026 and Wang and Stathopoulos (WS) model. The latter was verified by wind tunnel tests of sixty nine cases of multiple roughness patches, and also with a simplified 2D numerical model. This work extends that numerical study to three dimensions and also models roughness elements explicitly. The current numerical study shows better agreement with the WS model, that has shown better agreements with BLWT tests, than the ESDU model. This is in contrast to previous results of Wang and Stathopoulos, who concluded that CFD shows better agreement with the ESDU model. Many cases were simulated in a V-BLWT that has same dimensions as BLWT used in the original experiment and also in a reduced symmetrical version (S-BLWT) that takes advantage of regular arrangement of roughness blocks. The S-BLWT gives results almost identical to V-BLWT simulations, while achieving significant reduction on computational time and resources.

• 한국광학회지
• /
• 제13권3호
• /
• pp.209-214
• /
• 2002

기판의 표면거칠기가 반사경의 산란에 미치는 영향을 조사하였다. 기판의 표면거칠기가 다른 다섯 종류의 기판에 이온빔 스퍼터링 방법과 전자총 증착 방법으로 각각 반사율이 1에 가까운 고반사율 박막을 증착하고 산란을 TIS 방법으로 측정하였다. 기판의 표면거칠기가 2$\AA$ 이상인 경우의 기판의 산란에 대한 반사경 산란 비율은 표면거칠기가 2$\AA$ 미만인 경우의 산란 비율에 비하여 급격한 증가를 나타냄을 알 수 있었으며, 기판의 표면거칠기가 낮은 경우 반사경의 산란은 기판의 표면거칠기보다 반사경을 구성하는 박막의 미세구조에 의존하는 것으로 판단되었다. 한편 반사경 중에서 가장 작은 산란은 2.1 ppm이었고, 이것은 표면거칠기 0.23$\AA$인 기판에 이온빔 스퍼터링 방법으로 제작되었다.

• The Journal of Advanced Prosthodontics
• /
• 제6권4호
• /
• pp.309-316
• /
• 2014

PURPOSE. The color of the ceramic restorations is affected by various factors such as brand, thickness of the layered the ceramic, condensation techniques, smoothness of surface, number of firings, firing temperature and thickness of dentin. The aim of this study was to evaluate the color change and surface roughness in dental porcelain with different thicknesses during repeated firings. MATERIALS AND METHODS. Disc-shaped (N=21) metal-ceramic samples (IPS Classic; Ivoclar Vivadent; Shaar, Liechtenstein) with different thickness were exposed to repeated firings. Color measurement of the samples was made using a colorimeter and profilometer was used to determine surface roughness. ANOVA and Tukey tests with repeated measurements were used for statistical analysis. RESULTS. The total thickness of the ceramics which is less than 2 mm significantly have detrimental effect on the surface properties and color of porcelains during firings (P<.05). CONCLUSION. Repeated firings have effects on the color change and surface roughness of the dental ceramics and should be avoided.