• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.1-6
• /
• 2000

As dies and molds have become more and more complicated in the recent years, the demand for lower cost and shorter production time is also growing stronger. Rapid prototyping and Tooling technologies are expected to be used for more rapid and lower cost tool fabrication. However the rapid tooling methods have not yet reached the level of application to the manufacturing of metallic dies and molds which require high dimensional accuracy. As the rapid tooling technology, there are the slurry casting, the powder casting, the direct laser sintering, and so on. Generally, in the slurry casting, the alumina powder and the water soluble phenol were mainly used. However, the mechanical properties of the phenol were not good enough to apply to molds directly. In this study, pure epoxy and two types of aluminium powder reinforced resin are applied to the slurry casting. The mechanical and thermal properties are better than phenol because the epoxy is the thermosetting resin. And mechanical characteristics such as shrinkage rate, hardness, surface roughness are measured for the sake of comparison. Metal powder reinforced resin molds are better than the resin tool form the viewpoint of shrinkage rate and hardness. Finally, it has been shown that the application possibility of this process is high, because the manufacturing time and cost savings are significant.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.715-724
• /
• 1999

The purpose of this study was to approve the possibility of clinical application of selftesting technique to confirm the cleanness status of the tooth surface after mechanical toothbrushing. Thirty-two periodontal patients who did not compromise any other systemic diseases were divided into two groups. Control group was instructed only the Bass method for toothbrushing, and then experimental group was demonstrated the Bass method and self-testing technique respectively for plaque control during this experiment. Selftesting technique is composed the comparison of roughness of the labial surface of maxillary central incisor and other toothsurface with touch sense using the tip of tongue. Plaque score and Gingival index were measured as clinical parameters at baseline and 1, 2 and 4 weeks after scaling and root planing. The results were as follows ; 1. Plaque scores and gingival index of 1, 2, and 4 weeks of two groups were statistically significant differences when compared with baseline value (p<0.05). 2. Plaque scores and gingival index of baseline and 1 week between two groups were not significant differences (p<0.05). 3. Plaque scores and gingival index of 2 and 4 weeks of test group were statistically significant difference when compared with control group (p<0.05). From the above results, self-testing technique which decides necessity of additional toothbrushing when tongue tip of subjects touch the maxillary molar buccal surfaces and mandibular molar lingual surfaces nd compares with maxillary anterior labial surfaces after toothbrushing appeared to effect the motivation of subjects. This study suggests that self-testing technique for cleanness after toothbrushing should be effect on the maintenance of oral hygiene when it is applied to clinical practice.

• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.79-90
• /
• 2009

본 논문에서는 심해부터 천해에 까지 적용가능한 동적결합형 태풍 해일-조석-파랑 수치모델을 태풍 매미에 적용하여 모델의 안정성과 정확성을 검증하였다. 동적결합형 모델은 해수유동 모델인 POM을 수정한 모듈과 심해 풍파모델인 WAM을 심해부터 천해까지 적용가능하도록 수정한 모듈로 구성되어 있다. 수정 POM 모듈에서 조위, 조류 와 해일을 계산하며, 수정 WAM 모듈에서 풍파를 계산하여 상호 계산된 결과를 주고 받도록 결합된 동적결합형 모델이다. 수정 WAM 모듈에서는 잉여응력과 바람에 의한 마찰응력, 해수면 조도계수 등의 계산결과가 POM으로 제공되며 수정 POM 모듈에서는 유속, 조위면 등의 정보가 WAM으로 제공된다. 개발된 수치모델을 태풍 매미에 적용하여 계산된 결과를 관측된 파랑 및 조위자료와 비교하여 정확성을 검증하였다.

• 한국진공학회지
• /
• 제14권2호
• /
• pp.84-90
• /
• 2005

분자선에피를 이용한 $In_{0.2}Ga_{0.8}N/GaN$ 이종접합 구조의 에피성장에 미치는 플라즈마의 rf전력의 영향에 대해 고찰하였다. 플라즈마를 발생시키는 rf 전력과 플라즈마 챔버압력의 조건에 따라 성장표면에 도달하는 분자나 원자의 에너지와 flux가 조절되어 에피성장 속도와 물질적 특성을 변화시킨다. 전력이 너무 낮거나 높은 조건에서 표면거칠기와 광특성이 각각 저하된 결과를 보였으며, 적정한 전력인 400W에서 성장한 $In_{0.2}Ga_{0.8}N/GaN$이 종접합 구조에서 날카로운 계면과 강한 photoluminescence 피크를 보였다. 이러한 현상에 대한 원인으로 고에너지 입자들이 성장표면에서 작용하는 기구들인 플라즈마에 의한 탈착과 표면확산, 성장표면의 하부에 주입되는 결함의 발생에 대하여 논하였다.

• Journal of Periodontal and Implant Science
• /
• 제46권2호
• /
• pp.107-115
• /
• 2016

Purpose: The aim of this study was to evaluate and compare tooth surface characteristics in extracted human molars after cervical enamel projections (CEPs) were removed with the use of three rotating instruments. Methods: We classified 60 extracted molars due to periodontal lesion with CEPs into grade I, II, or III, according to the Masters and Hoskins' criteria. Each group contained 20 specimens. Three rotating instruments were used to remove the CEPs: a piezoelectric ultrasonic scaler, a periodontal bur, and a diamond bur. Tooth surface characteristics before and after removal of the projections were then evaluated with scanning electron microscopy (SEM). We analyzed the characteristics of the tooth surfaces with respect to roughness and whether the enamel projections had been completely removed. Results: In SEM images, surfaces treated with the diamond bur were smoothest, but this instrument caused considerable harm to tooth structures near the CEPs. The piezoelectric ultrasonic scaler group produced the roughest surface but caused less harm to the tooth structure near the furcation. In general, the surfaces treated with the periodontal bur were smoother than those treated with the ultrasonic scaler, and the periodontal bur did not invade adjacent tooth structures. Conclusions: For removal of grade II CEPs, the most effective instrument was the diamond bur. However, in removing grade III projections, the diamond bur can destroy both adjacent tooth structures and the periodontal apparatus. In such cases, careful use of the periodontal bur may be an appropriate substitute.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.155-161
• /
• 2000

Recently, environmental pollution has become a big problem in industry and many researches have been done in order to preserve the environment. In the grinding process, the coolant has great influence on environment. It contains several chemicals(sulfur, phosphorus and chlorine) to improve the grinding efficiency. If these additives go into the workplace atmosphere, it is harmful for workers. It can also cause the environment pollution. Because of these reasons many studies have been done to minimize the amount of coolant. However the small amount of coolant can cause the thermal defect on the ground surface layer. This study forced the effects of the compressed cold air when the spindle shaft materials(SCM4 & SCM21) were cylindrical ground with WA wheel. The compressed cold air was used as the coolant and grinding performance was compared with that of the conventional grinding fluids(emulsion). Many experiments were carried out with these two cooling materials. The surface roughness, residual stress, and roundness were measured for the cylindrical grinding. The test results showed that the compressed cold air was very useful as the cooling materials for grinding process. It was also efficient to minimize the thermal defects of workpiece and could also play a role in solving environmental pollution.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.62-62
• /
• 2003

고밀도 유도결합 플라즈마(high density inductively coupled plasma) 식각은 GaAs 이종접합 양극성 트랜지스터(HBTs)와 고속전자 이동도 트랜지스터(HEMTs)와 같은 GaAs 기반 반도체의 정교한 패턴을 형성하는데 더욱 많이 이용되고 있다 본 연구는 고밀도 플라즈마 소스(source)인 평판형(planar) 고밀도 유도결합 플라즈마 식각장치를 이용하여 $BCl_3$ 와 $BCl_3/Ar$ 가스에 따른 GaAs 식각결과를 비교 분석하였다. 공정변수는 ICP 소스 파워를 0-500W, RIE 척(chuck) 파워를 0-150W, 공정압력을 0-15 mTorr 이었다. 그리고 가스 유량은 20sccm(standard cubic centimeter per minute)으로 고정시킨 상태에서 Ar 첨가 비율에 따른 GaAs의 식각결과를 관찰하였다. 공정 결과는 식각률(etch rate), GaAs 대 PR의 선택도(selectivity), 표면 거칠기(roughness)와 식각후 표면에 남아 있는 잔류 가스등을 분석하였다. 20 $BCl_3$ 플라즈마를 이용한 GaAs 식각률 보다 Ar이 첨가된 (20-x) $BC1_3/x Ar$ 플라즈마의 식각률이 더 우수하다는 것을 알 수 있었다. 식각률 증가는 Ar 가스의 첨가로 인한 GaAs 반도체와 Ar 플라즈마의 충돌로 나타난 결과로 예측된다. $BCl_3$ 와 $BC1_3/Ar$ 플라즈마에 노출된 GaAs 반도체 모두 표면이 평탄하였고 수직 측벽도 또한 우수하였다. 그리고 표면에 잔류하는 성분은 Ga와 As 이외에 $Cl_2$ 계열의 불순물이 거의 발견되지 않아 매우 깨끗함을 확인하였다. 이번 발표에서는 $BCl_3$ 와 $BCl_3/Ar$ 플라즈마를 이용한 GaAs의 건식식각 비교에 대해 상세하게 보고 할 것이다.

• 한국습지학회지
• /
• 제10권3호
• /
• pp.99-109
• /
• 2008

본 연구는 I편에서 개발된 일체형 블록시스템의 수리모형실험 결과를 검증하고 호안블록의 효과를 해석하기 위하여 수치해석을 통한 수리모형 실험을 수리특성을 모의하고자 하였다. 하도내 적용된 일체형 호안블록의 수치해석을 위하여 1차원 HEC-RAS 모형과 2차원 흐름 모의를 위하여 RMA-2 모형을 적용하여 식생전후의 수리현상을 수리모형 실험결과와 비교하여 홍수 시 유속 저감효과의 분석 및 대안으로 제시하는데 그 목적이 있다. 분석결과 2차원 수치해석 모형이 1차원 수치해석보다는 수위 유속 모두 수리모형실험결과와 근접한 결과를 나타내어 수치해석을 통한 자료구축 시 좀 더 신뢰성 있는 자료를 구축할 수 있는 것으로 판단되었다. 유속은 최저 0.21m/sec에서 최대 1.89m/sec의 저감효과를 나타내었으며, 이는 100m 당 4.89sec에서 7.33sec의 지체시간을 가져오는 것으로 분석되었다.

• 한국광학회지
• /
• 제7권4호
• /
• pp.341-347
• /
• 1996

He-Ne 레이저를 표면이 9.mu.m의 거칠기로 연마된 원형유리에 투과시킨 준열광원을 제작하여 측정시간 T와 회전속도 v등의 실험조건을 변화시키면서 광전자 분포의 변화를 측정하였다. 준열광원에서 나오는 빛의 광전자 분포의 평균값 과 가변도 <(.DELTA.n)$^{2}$>를 구해본 결과, 측정시간 T가 결맞음시간 .tau.$_{c}$에 비해서 클 때는 광전자 분포가 푸아송 분포로 접근한다는 것을 확인하였다. T가 .tau.$_{c}$보다 훨씬 큰 즉, T/.tau.$_{c}$>>1인 경우 연마유리 원판의 회전속도를 변화시키면서 광전자 분포를 측정함으로써 회전속도가 증가함에 따라 결맞음시간 .tau.$_{c}$가 31.43.mu.m에서 2.48.mu.m로 감소한다는 것을 확인하였으며 표면의 거칠기 .sigma.와 회전속도 v의 비로 나타내는 결맞음시간 .sigma./v와 비교하였다.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.236-244
• /
• 2018

PURPOSE. To determine the discrepancy in monolithic zirconium dioxide crowns made with computer-aided design and computer-aided manufacturing (CAD/CAM) systems by comparing scans of silicone impressions and of master casts. MATERIALS AND METHODS. From a Cr-Co master die of a first upper left molar, 30 silicone impressions were taken. The 30 silicone impressions were scanned with the laboratory scanner, thus obtaining 30 milled monolithic yttrium stabilized zirconium dioxide (YSZD) crowns (the silicone group). They were poured and the working models were scanned, obtaining 30 milled monolithic yttrium stabilized zirconium dioxide (YSZD) crowns (the plaster group). Three predetermined points were analyzed in each side of the crown (Mesial, Distal, Vestibular and Palatal), and the marginal fit was evaluated with SEM (${\times}600$). The response variable is the discrepancy from the master model. A repeated measures ANOVA with two within subject factors was performed to study significance of main factors and interaction. RESULTS. Mean marginal discrepancy was $22.42{\pm}35.65{\mu}m$ in the silicone group and $8.94{\pm}14.69{\mu}m$ in the plaster group. The statistical analysis showed significant differences between the two groups and also among the four aspects. Interaction was also significant (P=.02). CONCLUSION. The mean marginal fit values of the two groups were within the clinically acceptable values. Significant differences were found between the groups according to the aspects studied. Various factors influenced the accuracy of digitizing, such as the design, the geometry, and the preparation guidance, as well as the texture, roughness and the color of the scanned material.