• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1032-1039
• /
• 2001

In this paper, modal analysis of wind-power generator rotor system was performed by using finite element method. Experimental modal analysis of generator rotor system was performed and the result were compared with analytical ones. Sensitivity method and localized modification method were used to update finite element model. As a result of updating finite element model, errors of natural freguency were reduced within 0.5％ and MAC value was improved near by l. Stability characteristics of wind-power generator rotor-bearing system through harmonic analysis about several external force will be analyzed using finite element model.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.99-104
• /
• 2003

본 논문은 헬리콥터 로터 시스템 설계시 고려해야 할 구조동역학 분야와 차세대 저진동 블레이드를 설계하는 과정을 소개하였다. 일반적으로 로터 시스템 설계시 허브 하중 최소화, 지상공진 방지 및 저진동 특성 등을 만족하도록 고유 진동수 범위를 정하게 된다. 먼저 로터 시스템에 대한 회전수별 고유 진동수 도표를 통해 로터 회전 속도와 공진영역이 생기지 않도록 설계하며 다음으로 동체에 전달되는 진동 하중 크기를 예측하기 위해 회전시 블레이드에서 발생되는 하중을 허브 중심의 비회전계 좌표축 성분으로 전환한다. 헬리콥터 전진 비행속도에 따라 동체에 전달되는 하중 크기를 구하고 동체를 강체로 모델링하여 조종속에서 발생되는 가속도를 계산함으로써 저진동 특성을 예측하였다. 본 설계기법은 현재 수행중인 차세대 로터 시스템 개발에 적용되고 있으며 향후 국내 개발 로터 시스템에 유용하게 적용될 것이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.862-865
• /
• 2004

Faults such as broken rotor bars, static and dynamic eccentricity are often reported in induction motors. These faults increase the down-time of equipment, which causes major loss of earnings to the industry. This paper presents a result of the finite-element(FE) analysis of air-gap flux variation in induction motors when rotor vibration conditions occur, An accurate modelling and analysis of rotor vibration in the machine are developed using FE software packages, and measuring the flux are made using the search coils. In the FE analysis, an induction motor with 380 [V], 5[HP], 4 Poles, 1742 [rpm] ratings is used. The results of FE analysis can be used for on-line vibration monitoring of the induction motors.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.707-714
• /
• 2016

This paper describes analysis results of vibration characteristics and modal test for a small-scale quad-rotor drone. The rotor arm has a slender body with a propeller and motor at its tip. Rotor system generates excitation for an unbalanced mass. Therefore, the drone platform is involved in the possibility of resonance. For advance identification of the possibility of resonance, confirmation of eigen-mode being closest to the propeller operation range is necessary. Material properties of CFRP tubes used for the rotor arm were acquired by finding the natural frequency based on Rayleigh method. A simplified quad-rotor FE model consisting of rotor arm assembly with tip mass was built to perform numerical analysis, and a free-free boundary condition was applied to provide flight status. Modal tests for the actual platform with impact hammer instrument were performed to verify analysis results. Separation margin from hazardous eigen-mode was checked on the propeller operation range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1056-1061
• /
• 2004

The vibration of rotor systems is caused by various factors, such as misalignment, unbalance, gear meshing, error of assembly, etc. Modal test and TDA/ODS analysis were done. The dynamic analysis of the armature was done with SAMCEF which is a commercial software for finite element and kinematic analysis. The transient response of the armature is calculated by the SAMCEF with the consideration of magnetic force and bearing stiffness, which are the essential elements for the design of high speed cutter. Main frequency of the vibration is due to the unbalance of the armature. The FEM analysis model considering unbalance and the high speed cutter have same vibration properties. The vibration sources of the high speed cutter is proved to be unbalance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.805-809
• /
• 2002

The support bearing requires high DN to raise specific energy efficiency for the state of the art rotating machine with high speed. Especially for the system has a big rotor(670 kgf) with high speed(about one million DNs) such as the pulsed generator, the selection of the bearing and lubrication method are very important. So the study for the critical speed of hollow rotor as well in accordance with high speed rotor and a full analysis are needed for rotor bearing system. This paper describes the analysis for rotor bearing system of pulsed generator compared with experimental data. The bearing and lubrication method are discussed as well with experimental data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.904-910
• /
• 2014

The Helicopter noise analysis code was developed using Farassat's Formular 1A based on Ffowcs-Williams and Hawkings equation and Lowson's Formula which contains single loading noise source concept. HART-II(Higher harmonic control Aeroacoustic Rotor Test), STAR(Smart-Twisting Active Rotor) and Active-tab Rotor were computed and analyzed by using developed noise code. The results of these rotor noise prediction are explained and its applicability would be mentioned in this paper.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.128-136
• /
• 2006

To predict the noise and vibration characteristics of induction motor system, it is necessary to develop the mathematical model including all the mechanical elements such as shaft, blower, rotor, fan, bearing, case and mounting parts. Coupling effect between case-mount system and rotor- shaft system including shaft, blower, rotor, fan and bearing is examined. Impact exciting experimentation was done in order to verify vibration model of the induction motor system. From experimental results, we can appreciate that the natural frequencies of induction motor system are in good agrements with analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.848-854
• /
• 2006

In this study, a computational analysis system has been developed in order to investigate flow-induced vibration(FIV) phenomenon for general stator-rotor cascade configurations. Relative movement of the rotor with respect to stator is reflected by modeling independent two computational domains. Fluid domains are modeled using the unstructured grid system with dynamic moving and local deforming methods. Unsteady, Reynolds-averaged Navier-Stokes equations with one equation Spalart-Allmaras and two-equation SST $k-\omega$ turbulence models are solved for unsteady flow problems. A fully implicit time marching scheme based on the Newmark direct integration method is used flow computing the coupled governing equations of the fluid-structure interaction problem. Detailed FIV responses for different flow conditions are presented with respect to time and vibration characteristics are also physically investigated in the time domain.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1555-1559
• /
• 2011

Turbine generator(13.8 kV, 137.5 MW) has high bearing vibration at rotation speed. Shorted turns in generator rotor windings have strong correlation with increased field current which is thus related to increase in bearing vibration. The recurrent surge oscillograph (RSO) test is performed on the rotor winding in turbine generator to detect shorted turns. The result of the RSO test indicates that shorted turns of rotor winding are generated in two locations. The RSO test was capable of identifying the presence, number, and location of shorted turns in generator rotor windings.