• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.589-593
• /
• 1995

The vibration of rotors in high speed sometimes leads to system failure or reduces the system life, and has a direct connection with stability. In this paper, the system's modelling was conducted in experimentally and the controller was designed to reduce the vibration due to the rotor unbalance using Squeeze Film Damper(SFD). SFD vibration control was achieved in constant rotating speed based on the controller designed. the control was confirmed working quite well in terms of both numerical simulation and experiment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.2
• /
• pp.87-92
• /
• 2003

This paper presents a flux estimator for the sensorless vector control of induction motors. The proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux in high speed region and in low speed region. The dynamic performance of proposed method is verified through the experiment. The experimental results show that motors ran easily start even under 150[%] load condition and operate continuously below 0.5[Hz].

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.1013-1021
• /
• 2000

This paper suggests fuzzy-PI controllers for a heavy-duty gas turbine. The fuzzy-PI controllers are designed to regulate rotor speed and exhaust temperature of the gas turbine. The controller gains are tuned by genetic algorithm(GA). This paper also proposes a new fitness function of GA using a desired output response. The suggested controller is compared with previous controllers via simulations and it is shown that the rotor speed variation of our controller is smaller than those of previous ones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.274-277
• /
• 1997

Eddy current effect in a high speed rotor suspended by a mangnetic bearing is invstigated using electromagnetic field analysis technique. The non-zero conductivity model of a laminated rotor sleeve is proposed to concern electrical shorting of laminates due to rub, handling or press fit assembly,et al. As the rotating speed increase, the distibution of magnetic flux line is changed and the magnetic forces decrease remarkably. ANSYS Magnetics (version 5.3) is used for the magnetic field analysis.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.222-224
• /
• 2000

This Paper investigates the speed control of Switched reluctance motor(SRM) using one chip microcomputer The SRM has the advantages of simple structure low rotor inertia. and high efficiency. The Position sensor is essential in SRM in order to synchronize the Phase excitation to the rotor position. The proposed system consists of phase locked loop controller, switching angle controller and inverter. The Performances in the Proposed system are verified through the experiment.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.677-679
• /
• 1993

The necessary parameter and states for the field-oriented control scheme of induction motor have been correctly estimated by EKF(Extended Kalman Filter). In this paper, Reduced-Order EKF(Extended Kalman Filter) is proposed tn estimate rotor speed and rotor flux. It is profitable in the implementation of field-oriented control scheme rather than Full-Order EKF because of saving operational quantity. The simulation results show that the proposed Reduced-Order EKF is excellent performance.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.452-455
• /
• 2003

Based on a field-oriented model of induction motor, adaptive backstepping approach using neural network(RBFN) is proposed for the control of induction motor in this paper. In order to achieve the speed regulation with the consideration of avoiding singularity and improving power efficiency, rotor angular speed and flux amplitude tracking objectives are formulated. rotor resistance uncertainty is compensated by adaptive backstepping and mechanical lumped uncertainty such as load torque disturbance, inertia moment, friction by RBFN. Simulation is provided to verify the effectiveness of the proposed approach.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.38-38
• /
• 2000

최근 개발되고 있는 고속회전기계들은 무게 절감과 성능을 높이기 위해 그 크기가 소형화되고, 높은 회전수를 갖는 경향이 있으며, 이로 인하여 기계의 운전속도가 회전체의 1차 굽힘 위험속도(Critical Speed) 이상에서 운전하는 경우가 빈번히 발생되고 있다. 위험속도를 통과하는 고속회전기계 개발에 있어 가장 중요하게 고려되고 있는 회전체진동 문제는 정밀 제작 및 조립, 좋은 성능의 댐퍼 설계, 그리고 고속회전체 밸런싱 (High Speed Balancing) 작업등을 통하여 더 이상 회전기계 개발의 장애요인이 아닌 것으로 점차 인식되어 가고 있다.(중략)

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.8
• /
• pp.425-433
• /
• 2002

This research investigates the electromechanical characteristics of a sing1e-phase squirrel cage induction motor due to broken rotor bars and rotor eccentricity. Numerical analysis is performed by solving the nonlinear time-stepping finite element equation coupled with the magnetic field equation, circuit equation and mechanical equation of motion. It shows that the asymmetry of magnetic flux due to the broken rotor bars and rotor eccentricity introduce a change in the stator current, torque, speed, magnetic force and vibration of a rotor at the same time. However, even in the existence of rotor eccentricity, 3 broken rotor bar introduces a dominant change in the magnetic force and rotor displacement, i.e., beating phenomenon in time domain and sideband frequencies in frequency spectra, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.173-180
• /
• 2017

The main objective of a torque controller below rated wind speed is to extract maximum power from the potential wind energy. To do this, the torque control method, which adjusts the torque magnitude and makes it proportional to the square of the generator speed, has been applied. However, this method makes the response slower as the wind turbines are getting larger in size with multi-MW capacities. In this paper, a torque control method that uses the nonlinear parameter of rotor speed for aerodynamic torque as a control gain is discussed to improve the response by adjusting an additional torque magnitude. The nonlinear parameter of the rotor speed could be calculated both online and offline. It is shown that the offline case is more practical and effective in producing power through the numerical simulation of a 2MW wind turbine by considering the real turbulence wind speed.