• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.38-40
• /
• 2008

This paper presents the torque ripple and vibration characteristic of interior type permanent magnet (IPM) motor according to rotor design. In the design methods, the optimal notchs are put on the rotor pole face, which have an effect on variation of permanent magnet (PM) shape or residual flux density of PM. Through the space harmonics field analysis, the positions of notch are found and the optimal shapes of notch are decided by using Finite Element Method (FEM). The validity of the proposed method is confirmed with experiments. Therefore, the vibration, starting current and efficiency of IPM is measured by experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.92-94
• /
• 2006

Single phase switched reluctance motor has a high speed capability, due to its very robust rotor, and requires only one electronic power switch in its control circuitry. The latter feature considerably reduces the cost of the drive system. But it involves starting problem and strongly torque ripple, which means that the motor is not suitable for application that require constant torque or speed. To solve torque ripple and region of these problem, this paper presents a single phase Switched Reluctance Motor model with a barrier rotor pole. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.84-89
• /
• 2005

This paper presents a control algorithm for a large salient-pole synchronous motor fed by a Load Commutated Inverter (LCI). Many papers have been presented in the past few years on the justification, design, and application of variable-speed drive. The focus of this paper is on high torque operation and the estimation of initial rotor position. The results of simulation indicate that it is possible to produce the maximum torque and estimate the initial rotor position.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.596-598
• /
• 2001

This paper presents an analysis of the characteristics in switched reluctance motor (SRM). 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The influence of the rotor shape on the radial force and torque ripple is investigated and the optimal shape of rotor pole is proposed to enhance the torque. The radial force characteristics acting on the surface of teeth is investigated by using the Maxwell's magnetic stress tensor method.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권1호
• /
• pp.1-8
• /
• 2017

Nowadays many articles describe the controlling models for four rotor flying vehicle. Basic approaches to the problem of these articles are mathematical expressions describing dynamics of the models of the vehicle and PID control for manipulating the object in 3 dimensional space. Design of control systems is usually started by careful consideration of its mathematical model description. We present a detailed mathematical model for a quad rotor. This paper first considers simulation of quadcopter control based on full state feedback technique with linearization in MATLAB environment and shows the results of the simulations. Finally will be shown experimental results of the state feedback control implemented in real model.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1595-1600
• /
• 2012

This paper shows an improvement of the WRSM (Wound Rotor Synchronous Motor) by satisfying the voltage limit condition at high speed. After that, it compares the performance of the improved WRSM to that of the IPMSM (Interior Permanent Magnet Synchronous Motor). The comparison has been made under the condition where the dimension of the motor is identical to that of the IPMSM, having the rotor switched to a wounded rotor form. Moreover, this paper compares the Basic Model of the two motor, and estimates the parameters of the WRSM, thereby proposing the method to improve high speed performance. Furthermore, this paper presents the feasibility of switching the conventional motor into rare-earth-free motors for traction purpose.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.848-853
• /
• 2001

A study about the shrink fits of rotor and retaining ring in generator was performed for the cases of three radial interference. The shrink-fitted retaining ring used to restrain the end turns of the winded coils in the rotor against centrifugal force requires very careful attention during design and manufacture because it has traditionally been the highest-stressed component of the generator. The contact pressures and residual stresses were obtained by the finite element analysis for each radial interference at zero, 100% rated, and 120% rated speeds, respectively. The results of analysis show that the radial interference in use needs to be increased carefully.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.493-497
• /
• 1998

In this paper, a three phase voltage source inverter synchronous motor drive is introduced which is capable of producing an approximate to sine-wave currents in the stator windings. Compare to a conventional current forced synchronous machine drive, for the same machine loss, a gain in out put per unit overall volume of 125% at a 50Hz supply frequency has been achieved. In addition, the torque pulsation has been drastically reduced. These improvements are achieved by introducing new rotor windings which are capable of controlling the stator current waveforms an approximate to sine-wave. A computer program has been developed which can be used to predict the dynamic performance of this drive/system. The paper describes the design of rotor windings for cylindrical rotor motor but the theory is equally applicable to salient-pole designs.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.462-467
• /
• 2010

This paper presents the rotor shape optimization of an interior type permanent magnet (IPM) motor for a reduction of vibration and Electromagnetic Interference (EMI). The vibration and EMI in permanent magnet motors is generated by cogging torque ripple, radial force and commutation torque ripple. Consequently, in order to improve vibration and EMI, the optimal notches are put on the rotor pole with an arc shape proposed. The variation of vibration frequency due to the cogging torque and radial force of each model is computed by the finite element method (FEM). From the analysis result and experiment, we confirmed the proposed model has remarkably improved the vibration and EMI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.650-652
• /
• 2000

Proposed slotless PM machine is constructed without stator winding slots. Its stator magnetic material is in the form of a ring and winding have a toroidal configuration and its rotor consists of a 4-pole Halbach array or radially magnetized PM rotor. Thus, airgap flux density distribution and induced emf waveform are essentially sinusoidal. Open circuit magnetic fields and developed torque of each type are presented from the analytical method and finite element method.