• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권2호
• /
• pp.102-108
• /
• 2015

In surgery for facial asymmetry, mandibles can be classified into two types, rotational and translational, according to the required mandibular movements for surgery. During surgery for rotational mandibular asymmetry, a bilateral sagittal split ramus osteotomy (BSSRO) may cause a large bone gap between the proximal and distal segments as well as condylar displacement, resulting in a relapse of the temporomandibular joint disorder, especially in severe cases. The intraoral vertical ramus osteotomy has an advantage, in this respect, because it causes less rotational displacement of the proximal segment on the deviated side and even displaced or rotated condylar segments may return to their original physiologic position. Unilateral intraoral vertical ramus osteotomy (UIVRO) on the short side combined with contralateral SSRO was devised as an alternative technique to resolve the spatial problems caused by conventional SSRO in cases of severe rotational asymmetry. A series of three cases were treated with the previously suggested protocol and the follow-up period was analyzed. In serial cases, UIVRO combined with contralateral SSRO may avoid mediolateral flaring of the bone segments and condylar dislocation, and result in improved condition of the temporomandibular joint. UIVRO combined with contralateral SSRO is expected to be a useful technique for the treatment of rotational mandibular asymmetry.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.279-286
• /
• 2011

Purpose: Chin is located in a prominent position, and is important to balance and harmony of the face. Genioplasty is widely performed with patients' high satisfaction, yet being relatively simple procedure. Recently in analysis of dentofacial trait, three rotational variables of yaw, pith, and roll are considered with three translational variables (forward/backward, up/down, right/left). And we could correct chin deformity effectively by applying the three rotational variables with three translational variables in genioplasty. Methods: Twenty-eight patients who have chin deformity underwent osseous genioplasty. Preoperative photography, facial three dimensional computed tomography, and cephalography were taken while chin deformities were accessed. The chin deformity was classified into four categories; macrogenia, microgenia, asymmetric chin deformity, and combined chin deformity groups. According to the nature of chin deformities and the patients' desire, preoperative plans were formulated, in consideration of three rotational variables and translational variables. Through intraoral approach, anterior mandible was exposed in the subperiosteal plane between the mental foramens and beneath the mental foramens. In the anterior mandible, vertical and horizontal grid lines with 5 mm intervals were marked to confirm the spatial location of osteomized bone segment after osteotomy. Chin repositioning was done in consideration of axial rotation and planar translation. Results: Most of the patients had achieved satisfactory results with few complications. By considering the three rotational variables, it was possible to make the chin repositioning effectively. One of the patients complained about insufficient chin correction. In other case, persistent sensory impairment around chin was observed. Conclusion: In conclusion, it is worthwhile to apply preoperative analysis and operative procedures in consideration of a three rotational variables with three translational variables in genioplasty.

• Archives of Plastic Surgery
• /
• 제37권6호
• /
• pp.847-849
• /
• 2010

Purpose: Traditional radical surgery for vulvar cancer produces severe skin and soft tissue defects in the vulvar and vaginal area. Vulvoperineal V-Y advancement fasciocutaneous flaps have limitations in advancement and tension at the wound margin and vaginal orifice area, causing wound disruption or vaginal wall exposure. Therefore, we designed the "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap for 3-dimensional reconstruction of vagina and vulvar area. Methods: A 27 year-old female was diagnosed with vulvar intraepithelial neoplasia. Radical vulvectomy and full-thickness-skin-graft was performed. We designed a vulvoperineal V-Y advancement fasciocutaneous flap as the greater wing and inguinal rotational skin as the lesser wing. After flap elevation, the inguinal flap was rotated $180^{\circ}$ to reconstruct the labia major and vaginal orifice. The perineum was reconstructed using V-Y advancement flaps. Results: The flap survived completely, without any complications. After 6 months, the patient was able to perform normal sexual activities and after 18 months, the patient was able to give birth to normal child by caesarean section. Conclusion: The traditional vulvoperineal V-Y advancement fasciocutaneous flap is thin, reliable, easily elevated and matches local skin quality. However, the vaginal wall becomes exposed due to limited advancement and tension of the flap. The "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap is useful for the release of vaginal orifice contracture, reconstruction of the labia major, and 3-dimensional reconstruction of vagina and vulvar area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권1호
• /
• pp.58-65
• /
• 2020

Oroantral fistula (OAF), also termed oroantral communication, is an abnormal condition in which there is a communicating tract between the maxillary sinus and the oral cavity. The most common causes of this pathological communication are known to be dental implant surgery and extraction of posterior maxillary teeth. The purpose of this article is to describe OAF; introduce the approach algorithm for the treatment of OAF; and review the fundamental surgical techniques for fistula closure with their advantages and disadvantages. The author included a thorough review of the previous studies acquired from the PubMed database. Based on this review, this article presents cases of OAF patients treated with buccal flap, buccal fat pad (BFP), and palatal rotational flap techniques.

• 대한족부족관절학회지
• /
• 제27권1호
• /
• pp.7-11
• /
• 2023

Rotational ankle fractures are one of the most common injuries of lower limbs treated by orthopedic surgeons. Open reduction and internal fixation (ORIF) is considered a gold standard treatment for unstable ankle fractures, though adjunct ankle arthroscopy is being increasingly used in cases of ankle trauma. Although the role and use of ankle arthroscopy are expanding, the clinical outcomes and cost-effectiveness of arthroscopy remain undefined. Furthermore, despite the number of clinical research studies performed on arthroscopically assisted surgery for ankle fractures, no definite guidelines have been agreed, and no consensus has been reached regarding indications. This article reviews the role, indications, operative techniques, and complications of ankle arthroscopy and compares the clinical outcomes of conventional ORIF and arthroscopically assisted ORIF.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.171-172
• /
• 2022

• Medical Lasers
• /
• 제9권1호
• /
• pp.44-50
• /
• 2020

Background and Objectives To evaluate the rotational stability of AcrySof toric intraocular lenses (IOL) by considering lapse of postoperative time and influence of capsulorhexis contraction. Materials and Methods A prospective, masked, single center study was conducted on 19 patients who had undergone microcoaxial cataract surgery and AcrySof toric IOL implantation. Slit-lamp retroillumination photographs of anterior segments were obtained from all patients after 1 week, 1 month and 3 months post-surgery. The degree of alteration of the postoperative IOL axis alignment and the amount of anterior capsular shrinkage were analyzed using Adobe Photoshop software. Results The mean degree of toric IOL axis misalignment was 2.18 (±20.2) degrees at 3 months follow-up. Quadrant analysis of the capsulorhexis aperture area at 1 week and 1 month post-operative, showed counterclockwise IOL rotation when the capsule contraction was dominant in the haptic part as well as clockwise rotation when dominant in the non-haptic part (p = 0.015). Conclusion The direction and degree of AcrySof toric IOL rotation differed throughout the follow-up period. Since most misalignments were found on the first post-operative day, physicians should try to minimize peri-operative risk factors that influence IOL rotation. There was also a correlation between the part of anterior capsule contraction and the direction of IOL rotation.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.195-201
• /
• 2022

Background: This study aimed to examine the preliminary clinical results of the infraspinatus rotational transfer procedure for irreparable posterosuperior rotator cuff tears. Methods: This study included 34 patients (mean age, 68.4 years). Their mean tear width and length measurements were 50.9 mm and 50.6 mm, respectively. The functional outcomes, including physician-determined and patient-reported scores, were evaluated before and at 1 year after surgery. The structural outcomes determined using the magnetic resonance imaging examination results were also assessed. Results: The clinical scores significantly improved after surgery compared with the scores before surgery: the Constant-Murley score (53.3±21.1 to 76.8±10.5), University of California at Los Angeles Shoulder score (15.6±3.6 to 27.8±6.7), American Shoulder and Elbow Surgeons Shoulder score (51.8±18.3 to 89.1±13.5), and WORC score (925.0±436.8 to 480.3±373.2) (all p<0.001). Postoperative re-tears were noted in two patients (5.9%). Conclusions: One year postoperatively, the patient's clinical scores significantly improved, with a re-tear rate of 5.9%.

• Archives of Reconstructive Microsurgery
• /
• 제10권2호
• /
• pp.111-117
• /
• 2001

Introduction : The Functional muscle transfer is used to reconstruct the injuried muscle and paralysis of the shoulder. Especially transfer of the trapezius has been the treatment of choice but it has disadvantages of inadequate function and deformed contour, and instability of humeral head in case of acromion resection. We report an operation for shoulder reconstruction after wide resection of malignant fibrous histiocytoma, using rotational latissimus dorsi flap and review the operation method and clinical outcome. Materials and Methods : A patient, 53 year old, with malignant fibrous histiocytoma in the acromioclavicular joint area had been underwent wide excision, including the deltoid, clavicular head of pectoralis major, part of trapezius, lateral 1/3 of clavicle and acromion including scapular spine. The rotational latissimus dorsi flap with its neurovascular pedicle was dissected and then placed over the resected area and transfer of muscle attached at coracoid process was done to achieve stability of the humeral head. The range of motion of the shoulder and test of muscle power were evaluated for functional outcome. Total follow-up period is 2 years 11 months. Results : At last follow-up, the range of motion of the shoulder is abduction $90^{\circ}$, flexion $90^{\circ}$, internal rotation $40^{\circ}$, external rotation $50^{\circ}$ and the muscle power is 4 grade in all direction and then we obtained good functional results. There are no complications such as instability or subluxation of the humeral head and deformed contour and he is a disease-free survival state. Conclusions : The transfered latissimus dorsi flap provides adequate lever arm and stabilization and covering of the humeral head by sufficient muscle volume and width. This procedure can be useful not only for the paralysed deltoid reconstruction but also for use in reconstructive surgery after wide resection of the shoulder for malignant tumor.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.