• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1611-1617
• /
• 2006

A compact and two-dimensional atomic force microscope (AFM) using an orthogonal sample scanner, a calibrated homodyne laser interferometer and a commercial AFM head was developed for use in the nano-metrology field. The x and y position of the sample with respect to the tip are acquired by using the laser interferometer in the open-loop state, when each z data point of the AFM head is taken. The sample scanner which has a motion amplifying mechanism was designed to move a sample up to $100{\times}100{\mu}m^2$ in orthogonal way, which means less crosstalk between axes. Moreover, the rotational errors between axes are measured to ensure the accuracy of the calibrated AFM within the full scanning range. The conventional homodyne laser interferometer was used to measure the x and y displacements of the sample and compensated via an X-ray interferometer to reduce the nonlinearity of the optical interferometer. The repeatability of the calibrated AFM was measured to sub-nm within a few hundred nm scanning range.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.121-130
• /
• 2009

전진 비행중인 자동회전 로터에 대한 비정상 수치해석 기법이 개발되었다. 자동회전 로터의 플래핑과 회전운동 방정식은 주어지는 시간간격에 따라 연속적으로 적분되며 이 때 회전면에서의 유도 속도장은 동적 유도흐름 이론(dynamic inflow theory)에 의해 계속 업데이트 되면서 블레이드의 모든 요소에서 유효 받음각을 결정하여 비정상 상태를 모사한다. 로터의 임의의 초기 회전속도 및 플래핑각에서 정상상태로 천이(transition)되는 과정을 시뮬레이션 하였고 블레이드 에어포일 공력 데이터들을 이용하여 방정식들의 수치해인 자동회전의 정상상태를 예측하였다. 2차원 Navier-Stokes 솔버로 받음각과 레이놀즈수에 따라 해석된 에어포일 데이터를 이용하여 자동회전의 비정상 시뮬레이션을 수행한 해석 결과는 풍동실험 결과와 잘 일치하였다

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.119-126
• /
• 2006

Gerotor hydraulic motor is widely used in hydraulic systems due to its low speed, high torque output and compactness in rotational direct driving of a heavy weight. Gerotor is a Planar mechanism consisted of a pair of rotor and circular teeth of stator assembly which forms a closed space, so called a chamber. The motion of rotor relative to the circular tooth is produced by the pressure difference of hydraulic operating fluid between the adjacent chamber. As all active contact points of rotor and circular teeth are subjected to very high sliding friction, a reduction in the performance of the gerotor hydraulic motor can not be avoided. Therefore, the core design parameters of gerotor profile used in hydraulic motors is to minimize a friction force by high contact stresses. The analytical design method of gerotor profile, based on envelope of a family of curves, is proposed. In this study, the influence of the tip clearances on three critical contact points between rotor and circular teeth of stator assembly has been explored by experimental data in this paper. At the same time a improvement method to reduce the friction force is proposed and the tip clearances on three critical points for getting an optimum gerotor profile are also analyzed.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.38-43
• /
• 2012

Using a fiber laser heat source, an oil pressure sensor was fabricated to measure the pressure in commercial vehicles. A stepping motor was used for the rotational and translational motion in the diaphragms and hardware joining. Laser welding process algorism including shielding gas control and vision system was integrated by using LabVIEW software for the high quality welding and in-line monitoring purpose. For the maximum flexibility in pressure transmission to the pressure sensor, thin sheet metal diaphragm, $25{\sim}50{\mu}m$(SUS-316L), was used and the diaphragms were optimally designed with FEM analysis. The welded samples were cross-sectioned the observation showed that the maximum depth ratio was more than seven times of diaphragms. The maximum welding speed was measured to be as high as 50in/mm by the developed automation mechanism. The fabricated prototypes were tested for the proof pressure, spring constant and sealing. The FEM results of spring constant measurement was as accurate as up to 80% of the design value and the sensor was safely operated up to the nominal pressure of 10bars.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.715-720
• /
• 2005

The rotating transmission is made up of belts, mass disks and gears. This precise piece of equipment is controlled electro-mechanically by the mote. and operation program. The control strategy and the transmission can be changed by belts' stiffness and change of the mass and gear. This transmission can be modeled as a rigid body, and also finds broad application in such diverse fields as machine tools, the cruise control system in automobiles, and control in the attitude and gimbals of spacecraft. The study of the rotating transmission excited by its base motion is not only able to predict the rotational performance, but obtain the fundamental data for vibration isolation. In this thesis, we studied the response abilities such as steady overshoot, undershoot and ect. and the response velocities such as rising time, settling time, and ect. in the rotating transmission through PD control experiment.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.992-1002
• /
• 1988

본 연구에서는 Monte Carlo 새뮬레이션 기법을 이용하여 지반가속도의 스펙트 럼 밀도함수(power spectral densities)로부터 여섯 성분의 지반가속도 시간이력곡선 을 얻고, 이들을 입력 데이터로 하여 운동방정식에 Newmark의 직접적분법을 이용하여 회전축-베어링 시스템의 응답상태벡터(response state vector)를 얻기로 한다. 충분 히 많은 수의 지반가속도 시간이력곡선을 시뮬레이션하고, 각 경우에 대응하는 응답상 태벡터들을 얻은 다음 일반적인 통계학 방법을 적용하여 평균함수, 표준편차 및 r.m.s (root mean square)등을 얻는다.

• 한국전자통신학회논문지
• /
• 제14권5호
• /
• pp.991-1000
• /
• 2019

플라잉 디스크 게임은 1940년부터 시작된 스포츠이며, 국내는 2007년대 이후 초등학교를 중심으로 보급되어 빠른 속도로 확대되고 있다. 이와 함께 스포츠 과학화가 진행되면서, 플라잉디스크 또한 기술적 향상과 효율성을 위한 모니터링 시스템을 구축하기 위한 연구가 지속되고 있다. 본 논문은 9축 움직임 센서와 GPS 등을 이용해 이용자의 플라잉 디스크에 정보를 획득하고, 이를 블루투스 5.0을 이용한 무선 전달 방법을 제안한다. 세부적으로는 실시간 데이터를 관찰하거나 후처리 과정을 통해 회전속도, 비행 궤적, 회전 등 비교 및 분석할 수 있는 펌웨어 및 소프트웨어 그리고 HW 플랫폼을 설계 구현하였다.

• Advances in aircraft and spacecraft science
• /
• 제3권1호
• /
• pp.1-14
• /
• 2016

The Carrera Unified Formulation (CUF) is here extended to perform free-vibrational analyses of rotating structures. CUF is a hierarchical formulation, which enables one to obtain refined structural theories by writing the unknown displacement variables using generic functions of the cross-section coordinates (x, z). In this work, Taylor-like expansions are used. The increase of the theory order leads to three-dimensional solutions while, the classical beam models can be obtained as particular cases of the linear theory. The Finite Element technique is used to solve the weak form of the three-dimensional differential equations of motion in terms of "fundamental nuclei", whose forms do not depend on the adopted approximation. Including both gyroscopic and stiffening contributions, structures rotating about either transversal or longitudinal axis can be considered. In particular, the dynamic characteristics of thin-walled cylinders and composite blades are investigated to predict the frequency variations with the rotational speed. The results reveal that the present one-dimensional approach combines a significant accuracy with a very low computational cost compared with 2D and 3D solutions. The advantages are especially evident when deformable and composite structures are analyzed.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.349-365
• /
• 2014

The dynamic response of structures under extremely short duration dynamic loads is of great concern nowadays. This paper investigates structures' response as well as the associated structural damage to explosive loads considering and ignoring the supporting soil flexibility effect. In the analysis, buildings are modeled by two alternate approaches namely, (1) building with fixed supports, (2) building with supports accounting for soil-flexibility. A lumped parameter model with spring-dashpot elements is incorporated at the base of the building model to simulate the horizontal and rotational movements of supporting soil. The soil flexibility for various shear wave velocities has been considered in the investigation. In addition, the influence of variation of lateral natural periods of building models on the obtained response and peak response time-histories besides damage indices has also been investigated under blast loads with different peak over static pressures. The Dynamic response is obtained by solving the governing equations of motion of the considered building model using a developed Matlab code based on the finite element toolbox CALFEM. The predicted results expressed in time-domain by the building model incorporating SSI effect are compared with the corresponding model results ignoring soil flexibility effect. The results show that the effect of surrounding soil medium leads to significant changes in the obtained dynamic response of the considered systems and hence cannot be simply ignored in damage assessment and response time-histories of structures where it increases response and amplifies damage of structures subjected to blast loads. Moreover, the numerical results provide an understanding of level of damage of structure through the computed damage indices.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.163-171
• /
• 2015

The aim of this study was to investigate kinematic mechanism of gait different road conditions(dry vs. oil) in order women. For this study, twenty older women and ten young women participated in this research. twelve infrared cameras were used to collect data. It appeared that the gait strategies of older women were slower velocity and higher CoM than young women. Depending on road conditions, gait velocities of dominant muscle older women on dry surface were faster than dominant sense older women, but those of them were inverse on oil surface. The slip displacement of dominant muscle older women was less than young women, but the slip displacement of dominant sense older women was greater than young women. In case of blind during stance phase on oil surface, the rotational motion of the ankle and knee joints were increased. In conclusion, older women were subjected to self-organization theory and phase shift in dynamic theory.