• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2385-2388
• /
• 2005

In this paper, we propose the estimation method for the image affine information for computer vision. The first estimation method is given based on the XYS image normalization and the second estimation method is based on the image normalization by Pei and Lin. The XYS normalization method turns out to have better performance than the method by Pei and Lin. In addition, we show that rotation and aspect ratio information can be obtained using the central moments of both the original image and the sensed image. Finally, we propose the modified version of the normalization method so that we may control the size of the image.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.589-592
• /
• 1999

Matching is a key problem in computer vision, image analysis and pattern recognition. In this paper a multiscale image matching algorithm by wavelet local extrema is proposed. This algorithm is based on the multiscale wavelet transform of the curvature which can utilize both the information of local extrema positions and magnitudes of transform results. This method has advantages in computational cost to a single scale image matching. It is also rotation-, translation-, and scale-independent image matching method. This matching can be used for the recognition of occluded objects.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.25-32
• /
• 2007

The present paper deals with the heat/mass transfer characteristics for the rotating impingement/effusion cooling system. By changing the size and number of injection hole, its effects on heat/mass transfer are investigated and three different injection hole cases are considered such as LH, DH and SH, respectively. Reynolds number based on the effusion hole diameter is fixed to 3,330 and two jet orientations are considered. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. The LH case shows that the local heat/mass transfer is significantly varied by the rotation. Moreover, the low and non-uniform Sh distributions occur because the impinging jet is deflected by Coriolis force. Meanwhile, for DH and SH cases, the local heat/mass transfer coefficients are enhanced significantly compared to LH case and the rotation effect decreases with increasing the jet velocity. The averaged Sh value of DH and SH case rises up to 45%, 85% than that of LH case. However, the uniformity of heat/mass transfer deteriorates due to the steep variation of heat/mass transfer.

• Advances in robotics research
• /
• 제1권1호
• /
• pp.81-99
• /
• 2014

This paper contributes towards the development of a computer vision system for telemonitoring of industrial articulated robotic arms. The system aims to provide precision real time measurements of the joint angles by employing low cost cameras and visual markers on the body of the robot. To achieve this, a mathematical model that connects image features and joint angles was developed covering rotation of a single joint whose axis is parallel to the visual projection plane. The feature that is examined during image processing is the varying area of given circular target placed on the body of the robot, as registered by the camera during rotation of the arm. In order to distinguish between rotation directions four targets were used placed every $90^{\circ}$ and observed by two cameras at suitable angular distances. The results were deemed acceptable considering camera cost and lighting conditions of the workspace. A computational error analysis explored how deviations from the ideal camera positions affect the measurements and led to appropriate correction. The method is deemed to be extensible to multiple joint motion of a known kinematic chain.

• 천문학회보
• /
• 제46권2호
• /
• pp.71.1-71.1
• /
• 2021

We perform disk-halo decomposition of the Large Magellanic Cloud (LMC) using a novel HI velocity field extraction method, aimed at better deriving its HI kinematics and thus mass distribution in the galaxy including both baryons and dark matter. We decompose all the line-of-sight velocity profiles of the combined HI data cube of the LMC, taken from the Australia Telescope Compact Array (ATCA) and Parkes radio telescopes with an optimal number of Gaussian components. For this, we use a novel tool, the so-called BAYGAUD which performs profile decomposition based on Bayesian MCMC techniques. From this, we disentangle turbulent non-ordered HI gas motions from the decomposed gas components, and produce an HI bulk velocity field which better follows the global circular rotation of the galaxy. From a 2D tilted-ring analysis of the HI bulk velocity field, we derive the rotation curve of the LMC after correcting for its transverse, nutation and precession motions. The dynamical contributions of baryons like stars and gaseous components which are derived using the Spitzer 3.6 micron image and the HI data are then subtracted from the total kinematics of the LMC. Here, we present the bulk HI rotation curve, the mass models of stars and gaseous components, and the resulting dark matter density profile of the LMC.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.119-125
• /
• 1999

This paper gives an overview of the various approaches to designing statistical pattern recognition scheme based on Bayes discrimination rule and the artificial neural networks for rotating machine condition classification. Concerning to Bayes discrimination rule, this paper contains the linear discrimination rule applied to classification into several multivariate normal distributions with common covariance matrices, the quadratic discrimination rule under different covariance matrices. Also we discribes k-nearest neighbor method to directly estimate a posterior probability of each class. Five features are extracted in time domain vibration signals. Employing these five features, statistical pattern classifier and neural networks have been established to detect defects on rotating machine. Four different cases of rotation machine were observed. The effects of k number and neural networks structures on monitoring performance have also been investigated. For the comparison of diagnosis performance of these two method, their recognition success rates are calculated form the test data. The result of experiment which classifies the rotating machine conditions using each method presents that the neural networks shows the highest recognition rate.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1905-1913
• /
• 2002

Using the finite element method, this study investigates the dynamic time responses of a flexible spinning disk of which axis of rotation is misaligned with the axis of symmetry. The misalignment between the axes of symmetry and rotation is one of the major vibration sources in optical disk drives such as CD-ROM, CD-R, CD-RW and DVD drives. Based upon the Kirchhoff plate theory and the von-Karman strain theory, three coupled equations of motion for the misaligned disk are obtained: two of the equations are for the in-plane motion while the other is for the out-of-plane motion. After transforming these equations into two weak forms for the in-plane and out-of-plane motions, the weak forms are discretized by using newly defined annular sector finite elements. Applying the generalized-$\alpha$ time integration method to the discretized equations, the time responses and the displacement distributions are computed and then the effects of the misalign ment on the responses and the distributions are analyzed. The computation results show that the misalignment has an influence on the magnitudes of the in-plane displacements and it results in the amplitude modulation or the beat phenomenon in the time responses of the out-of-plane displacement.

• 한국멀티미디어학회논문지
• /
• 제9권2호
• /
• pp.234-243
• /
• 2006

최근 급속한 HCI(Human-Computer Interaction) 및 감시 기술의 발달로, 얼굴영상을 처리하는 다양한 시스템들에 대한 관심이 높아지고 있다. 그러나 이런 얼굴영상을 처리하는 시스템들에 대한 연구는 주로 얼굴인식이나 얼굴 표정분석과 같은 분야에 집중되었고, 얼굴의 방향성 검출과 같은 분야에는 많은 연구가 수행되지 못하였다. 본 논문은 두 눈썹과 아래 입술로 구성된 얼굴삼각형(Facial Triangle)이라는 특징을 이용하여 얼굴의 방향성을 쉽게 측정하는 방법을 제안한다. 특히, 하나의 이미지만을 사용하여 얼굴의 수평 회전각과 수직 회전각을 구하는 간단한 공식을 소개한다. 수평회전각은 좌 우 얼굴삼각형간의 면적비율을 이용하여 계산하고, 수직회전각은 얼굴삼각형의 밑변과 높이 비율을 이용하여 계산한다. 실험을 통해, 제안하는 방법은 오차범위 ${\pm}1.68^{\circ}$ 내에서 수평회전각을 구할 수 있었고, 수직회전각은 회전각이 증가할수록 오류가 줄어드는 경향을 보여주었다.

• 전자공학회논문지S
• /
• 제36S권8호
• /
• pp.88-100
• /
• 1999

얼굴과 얼굴 구성 요소를 자동으로 검출하는 것은 얼굴 인식 시스템에서 반드시 필요한 과정이다. 본 논문에서는 얼굴의 크기와 회전 변화가 동시에 존재하는 영상에서 log-polar 사상(mapping)에 기반한 단일 log-polar 얼굴 탬플릿(template)을 사용하는 밝기 기반 템플릿 정합(matching)으로 얼굴과 눈을 자동으로 검출하는 새로운 방법을 제안한다. 템플릿 정합에서는 입력 영상의 크기와 회전 변화를 템플릿의 크기와 회전 각도에 대하여 정규화시키는 과정이 필요하다. 그런데 인간 시각 시스템의 space-variant 특성과 유사한 구조를 가지는 log-polar 사상은 입력 영상의 크기와 회전 변화를 log-polar 평면상에서 수평과 수직 순환 이동으로 변화시키는 특성을 갖는다. 이러한 특성을 이용하여 입력 상반신 영상의 fixation point들에서 사상된 후보 log-polar 얼굴들은 log-polar 얼굴들을 log-polar 평면상에서 수평과 수직 이동시켜 템플릿과 정합한다. 따라서 제안한 방법은 얼굴의 크기와 회전 변화에 대응하기 위하여 계산량이 증대되는 multitemplate와 multiresolution 기법들은 적용할 필요성이 없게된다. 이러한 크기와 회전 불변 정합을 이용하여 제안된 방법은 얼굴과 눈을 동시에 검출할 수 있다. 얼굴의 크기와 회전 변화가 존재하는 상반신 영상 795장에 제안한 방법을 적용하여 98.7%의 얼굴과 눈의 검출율을 달성하였다.

• Computers and Concrete
• /
• 제8권4호
• /
• pp.445-463
• /
• 2011

In the design of reinforced concrete (RC) beams, apart from providing adequate strength, it is also necessary to provide a minimum deformability even for beams not located in seismic regions. In most RC design codes, this is achieved by restricting the maximum tension steel ratio or neutral axis depth. However, this empirical deemed-to-satisfy method, which was developed based on beams made of normal-strength concrete (NSC) and normal-strength steel (NSS), would not provide a consistent deformability to beams made of high-strength concrete (HSC) and/or high-strength steel (HSS). More critically, HSC beams would have much lower deformability than that provided previously to NSC beams. To ensure that a consistent deformability is provided to all RC beams, it is proposed herein to set an absolute minimum rotation capacity to all RC beams in the design. Based on this requirement, the respective maximum limits of tension steel ratio and neutral axis depth for different concrete and steel yield strengths are derived based on a formula developed by the authors. Finally for incorporation into design codes, simplified guidelines for designing RC beams having the proposed minimum deformability are developed.