In this research, we experimentally investigated the sealing performance of elastomeric rotary lip seals for washing machines. In general, NBR is used as a material for elastomeric rotary lip seals in washing machines, but the mixing formula of the rubber material can affect the sealing performance. In this study, we manufactured rotary lip seals using three kinds of NBRs with a different mixing formula, and examined the sealing performance using an acceleration test mode. The results of an SEM investigation into the surfaces of three kinds of specimens showed a much smaller wear volume and better sealing performance for the specimens with smaller particle sizes of mixing composition than for the specimen with the larger. Repeated deformation and recovery by the shaft-to-seal eccentricity on rotation were shown to cause a phase difference in the rubber material, and we measured the recovery ratio to find the influence of this phase difference on the sealing performance. As another method for checking the phase difference, we also measured tan ä, and a lower tan ä was revealed as the recovery ratio increased for each specimen. Specimens with a higher recovery ratio (lower tan ä) were shown to have a better sealing performance. Consequently, specimens with a smaller particle size in the mixing composition had a better sealing performance because they show a higher recovery ratio.
We propose a new watermarking scheme that can be used to embed multiple bits and also resilient to JPEG compression and geometrical transforms such as scaling, rotation, and cropping based on holographic watermark that allows multiple watermark recovery without original content(cover image).
This retrospective study is designed to compare the clinical results of tibial tuberosity transposition (TTT) and anti-rotation suture (ARS) treatments for medial patellar luxation (MPL). Medical records of 133 dogs were reviewed that had undergone surgical correction of MPL between January 2013 and May 2017. MPL correction was performed on 182 stifles, with TTT and ARS being performed on 101 stifles and 81 stifles. The common dog breeds receiving surgical treatment for MPL were Maltese, Pomeranian, Chihuahua and Poodle. Mean age of dogs with MPL was 32.6 months, and their mean body weight was 4.26 kg. Seventy dogs (52.6%) were male and 63 (47.4%) were female. Of the 182 stifles with MPL, grade II, III and IV were 18.7%, 72.0% and 9.3%. Total complications after TTT and ARS were recorded in 16.8% and 29.6%. Major complications after TTT and ARS were recorded in 5.9% and 12.3%, minor complications after TTT and ARS were recorded in 10.9% and 17.3%. The risk of complication and reluxation rate after TTT were significantly lower than that for ARS (p < 0.05). However, the rate of reluxation among dogs treated by ARS (1.2%) for grade II MPL was significantly lower than that for dogs treated by ARS (8.6%) for grade III MPL (p < 0.05). The TTT group had a shorter recovery period after surgical intervention than that in the ARS group (p < 0.001). In conclusion, TTT had a significantly lower incidence of complication and a shorter recovery period than ARS. However, ARS for grade II MPL appears to be a good surgical option for reducing the rate of reluxation after surgery. These results of this study could be used to provide therapeutic guidelines for surgical MPL correction in small-breed dogs.
Choi, Chang Hyuk;Sim, Jung Hyun;Lee, Sang Hwa;Lee, Joo Hwan;Nam, Jun Ho
Clinics in Shoulder and Elbow
/
제17권3호
/
pp.120-126
/
2014
Background: To compare the treatment of the proximal humerus fracture using a Polarus nail or Philos plate, we aimed to analyze the functional recovery and the factors affecting the selection between the two types of surgery. Methods: The study included 107 patients with proximal humerus fracture who underwent surgery at our institution. Of these patients, 67 underwent surgery with Polarus nails (G1) and 40 with Philos plates (G2). In G1, the cases of two- and three-part fractures were 60 and 7 cases, in G2, the cases of two-, three-, and four-part fractures were 28, 10, and 2 cases, respectively. The average age was 61 years old, and the average follow-up period was 32.5 months. We compared radiological results, the functional recovery retrospectively. Results: The radiological union time was 6.8 weeks and 8.7 weeks on average in G1 and G2 (p < 0.05). At the one-year follow-up period, these were visual analogue scale (VAS) 1.355, forward flexion (FF) 130.968, external rotation (ER) 50.161, internal rotation (IR) L2 in G1, and VAS 0.781, FF 135.806 ER 51.25, IR L1 in G2, respectively, showing no significant differences between the two groups (p > 0.05). Similar observations were made at the final follow-up. In terms of functional recovery, no significant differences were seen at the one-year or at the final follow-up period (p > 0.05). Conclusions: For the surgical treatment of proximal humeral fracture, the selection of the type of surgery is affected by the fracture pattern. However, both methods give satisfactory outcomes and do not show significant differences in the functional outcome after the surgery.
Purpose : The purpose of this study was to identify the comparison of the effects of manual therapy combined with exercise on range of motion (ROM), muscle strength, and functional performance in adolescent baseball players with internal impingement syndrome of the shoulder. Methods : The subjects were 30 patients diagnosed with impingement syndrome of the shoulder. Thirty subjects are randomly assigned to each 3 different groups; Group 1. (exercise group), Group 2. (exercise+mobilization; EMOB group), Group 3. (exercise+mobilization with movement; EMWM group). The interventions were performed three times a week for 4 weeks. The main outcome measures were goniometer, Biodex dynamometer, and Korean Kerlan Jobe shoulder-elbow (K-KJOC) scores. The ROM (external and internal rotation), muscle strength (external and internal rotation: 60 °/sec., 180 °/sec.), and functional performance were compared among the groups. Results : No significant difference was observed among the groups in the range of external rotation of the shoulder before and after the intervention, but the range of internal and total rotation was significantly increased in Group 2, 3 compared to Groups 1. Muscle strength of external and internal rotation (60 °/sec., 180 °/sec.) was not significantly different among Group 1, 2, 3, and functional performance was significantly increased in Group 2, 3 compared to Group 1. However, there was no significant difference between Group 2 and Group 3 in all measurements. Conclusion : An intervention with manual therapy such as EMOB and EMWM was more effective than exercise alone for rapid recovery from shoulder injury and improvement in functional performance. However, further efforts are needed to identify effects of specific interventions with manual therapy.
The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.
Pressure coefficient in rotating discharge hole was measured to gain insight into the influence of rotation to the discharge characteristics of rotating discharge hole. Pressure measurements were done by the telemetry system that had been developed by the authors. The telemetry system measures static pressure using piezoresistive pressure sensors. Pressure coefficients in rotating discharge hole were measured in longitudinal direction and circumferential direction with various rotating speed and 3 pressure ratios. From the results, the pressure coefficient, and therefore the discharge coefficient, is known to decrease with the increase of Ro number owing to the increase of flow approaching angle to the discharge hole inlet. However, there exists critical Ro number where the decrease rate of discharge coefficient with the increase of Ro number changes abruptly; flow separation occurs from the discharge hole exit at this critical Ro number. Critical Ro number increases with the increase of length-to-diameter ratio, but the increase is small where the length-to-diameter ratio is higher than 3. The decrease rate of discharge coefficient with the increase of Ro number depends on the pressure recovery at the discharge hole, and the rate is different from each length-to-diameter ratio; it has tendency that the short discharge hole shows higher decrease rate of discharge coefficient.
In crushed service areas of Metro railway lines, there are problems such as the buildup discontent, the irregular operation time and rotation of rolling stocks, caused by frequently occurred train delay. Train delay is affected by operation conditions or infrastructure capacities such as train schedule, line capacity, car rotation plan, shunting movements at origin and destination, and also by transport demand characteristics. Furthermore, a delay produce another delays and spread over the following trains. So it is not easy to build up a protection and recovery plan. In this research, we conduct experimental analysis study based on the real metro data, and as a result, present the relation between the traffic demand and the dwell time. And finally, propose future research themes for improving the operation efficiency of metro railways.
목적: 본 연구는 프리즘 밸러스트 디자인 원데이 토릭 소프트 콘택트렌즈의 임상적 성능을 평가하고 안경교정 상태와 시기능의 질을 비교하기 위해 실시하였다. 방법: 대상자는 구면 -2.75 D이고 -0.75 DC에서 -2.25 DC 사이의 직난시를 갖는 건강한 대학생 15명(30안)을 대상으로 프리즘 밸러스트 디자인 렌즈를 양안에서 처방하여 2주간 착용시켰다. 대상자들은 토릭렌즈의 임상성능(렌즈 안정 위치, 중심안정, 렌즈 움직임, 타이트한 정도, 렌즈 안정성, 회전 회복, 자각증상)을 평가하고 양안시 검사 값 및 대비감도를 초기 방문과 2주간 적응 후 검사하여 안경교정 상태와 비교였다. 결과, 프리즘 밸러스트 디자인의 토릭 소프트 콘택트렌즈를 2주간 착용한 후에 렌즈 방향안정, 회전 회복, 자각증상을 평가한 결과, 적응 전보다 향상되었다. 양안시 검사 값과 대비감도가 안경 착용 상태와 비교할 때 통계적으로 유의한 차이가 없는 것으로 나타났다. 결론: 프리즘 밸러스트 디자인의 토릭 소프트 콘택트렌즈를 착용한 후 임상적 기능이 증진하였다. 양안시 검사값과 대비감도가 안경교정 상태와 차이가 없는 것으로 평가되었다. 본 연구를 통해서 토릭 소프트 콘택트렌즈 착용자가 안경교정 자와 유사한 시생활을 영위할 수 있는 것으로 사료된다.
충격형 분채기에 의한 폐프린트배선기판(PCBs)의 분쇄과정에서 일어나는 금속성분의 분쇄특성에 대한 연구가 수행되었다. PCBs로부터 금속성분들을 단체분리하기 위하여 -3 mm로 파쇄한 다음 충격형 분쇄기를 사용하여 분쇄하였으며 햄머의 회전속도가 금속성분의 분쇄에 미치는 영향을 관찰하였다. 동과 땜납 등과 같은 금속성분들의 입도분포 및 단체분리도를 조사하였다. 경사진동판을 사용하는 PCBs 분쇄물로부터 금속입자들의 형상분리에서 햄머의 회전속도와 입자크기가 미치는 영향을 검토하였다 61.3 m/s 햄머속도에서 동 성분은 +297$\mu$m 입자가 80% 이었지만 땜납성분은 -297$\mu$m 입자가 90%에 달했다. 형상분리법에 의한 금속입자의분리 시 햄머의 회전속도가 클수록 회수위치가 짧았으며 +297 $\mu$m 입자의 회수위치가 -297~+149$\mu$m 입자보다 짧았다. 회수위치가 짧을수록 금속입자의 구형도가 좋았으며 KI 값은 KI=1 로 증가하고, $\phi_{c}$ 값은 $\phi_{c}$ =1로 감소하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.