• Journal of Korea Foresty Energy
• /
• v.7 no.1
• /
• pp.22-27
• /
• 1987

Above ground biomass production of one-year-old hybrid poplars was investigated to select the best clones which are suitable for short rotation forestry. The results were as follows: 1. Average dry weight of Populus alba X P. glandulosa Fl clones was 2.86 for stem,0.41 for branches 0.70 for leaves and 3.97 t/ha for total. and the ratios of green weight to dry weight were 0.47 for stem,0.36 for branches,0.31 for leaves and 0.42 for total. Dry weight of Populus nigra X P. maximowiczii Fl clones was 1.48 for stem, 0.54 for branches.0.71 for loaves and 2.73t/ha for total, and the ratios of green weight to dry weight were 0.42 for stem. 0.37 for branches, 0.28 for leaves and 0.36 for total. 2. Biomass production (green and dry weight)of Populus alba X P. glandulosa F1 clones can be predicted by diameter measurement only, but biomass production of Populus nigra X P. maximowiczii F1 clones can not be predicted by any of investigated characteristics. 3. Dry weight distribution of pepulus alba X P. glandulosa Fl clones were 73$\%$ for stem, 10$\%$ for branches and 17$\%$ for leaves, and dry weight distribution of P. Populus nigra X P. maximowiczii F1 clones were 54$\%$ for stem, 20$\%$ for branches and 26$\%$ for leaves.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.31-41
• /
• 2016

This study was conducted to develop a handy earth auger for use in sloppy and rugged forest terrains in order to reduce labor cost which comprises a major part of the production costs in forest afforestation projects. The first prototype is developed consist of two parts, the soil-digging screw and the battery power source. The specifications of the first prototype screw are: length of 170mm, a top diameter of 60mm, bottom diameter of 47mm, 23° angle for each helix, and a 50mm awl-head tip. The use of a single line of screw was selected for reduced weight. In addition, a power source of rotary DC Motor(WD-6G2425, WONILL, Korea) with a maximum torque of 30kgf-cm, rotation of 20-30rpm, K6G30C decelerator with a reduction ratio of 30:1 which could be used with no load for 48 was operated. In consideration of its weight, a lithium battery was utilized in line with the goal of developing a lightweight auger. In order to evaluate the performance of the first prototype, test sites were selected as 6 areas. The rotational force was found to be highest in area A(Solid area), followed by areas F(Mounted slope 40° area) and E(Mounted slope 30° area). It was also observed that in general, the rotational force increased along with the increase in soil depth with the maximum rotational force recorded at 10cm.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.194-195
• /
• 1982

Recommendaton: These are the highlights of the findings of the Timber Consumption Survey carried out by the Project in 1966, and covering consumption for the period from 1961 to 1965. The survey was oriented towards consumption for structural, commercial and industrial purposes and existing estimates for local (village-level) consumption as fuel and the like were adopted. A full report on the survey was submitted to the Bureau of Forestry in 1966. Long-term Trends: After allowance for anticipated population increase, this ten year's increase in industrial wood consumption represents a gain of about 30% in per capita consumption (from 0.0913 cu.m. per capita to 0.118 cu.m. per capita). This is only about half the expected general economic growth of about 75% (7% per annum). It is therefore likely (a) that the 1975 estimate is conservative, (b) that the consumption demand beyond 1975 may be expected to build up at a greatly increased rate. Estimated income elasticity coefficients are high, and with expected ir,creases in prosperity and population, the consumption is expected to rise to 10 million cu. meters by the year 2,000. Consumption Pattern: The breakdown of industrial consumption (1965) is given in Table 4-2, showing sawnwood consumption as the most important in 1965. The upward trend in all sectors over the 1961-65 period is expected to continue. The general consumption pattern is expected to change through 1975 with a sharp increase in the relative importance of pulp products (to 30% of total consumption) offset by declining relative importance of sawlogs. The following recommendations follow from the study: (i) Industrial forests. - A programme of establishment of consolidated industrial forests should be initiated as a matter of urgency. (ii) Fuelwood forests - Properly sited, protected and managed fuelwood forest, worked on a 20-year rotation, should be established as a nation wide basis. (iii) Hardwood utilization - Detailed investigations are required into the use of indigenous hardwoods for the pulp, particle board and hardboard industries. (iv) Mining timber - Preservation treatment of all mining timber should be enforced by law. (v) Sawmills - Licencing restrictions should be enforced to reduce the number of small, inefficient sawmills. b. Extension work should be undertaken bv government to improve sawmilling practices.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.47-55
• /
• 1986

During the past 4 years, I have made a careful analysis of the present rotating system of hunting areas, on the one hand, by asking a group of hunters to fill out a questionnaire, and on the other hand, by referring to the written documents on the subject. And, as a result, it is concluded that this system, by varying the hunting grounds each year, contains in itself several problems as follows. 1. The hunters find it quite inconvenient to use a different hunting ground year after year and they also complain that the present hunting ground charge is more than it is worth. Therefore, it is expected that the number of hunters will explosively increase in the future with the betterment of hunting conditions. 2. The hunters have almost no information about game and they are, as a whole, lacking in the ethics of hunting. 3. The allotment of time in hunting training courses is not so sufficient that it is next to impossible to improve the quality of hunters. 4. As a rule, the population density of wildlife is so sparse that it falls short of the proper standard of it. 5. The present hunting system does not seem to contribute to the advancement of tourism. 6. It is absolutely necessary to make a general survey of the situation of wildlife for the legal protection of it. Besides, the interests of hunters are so closely tied up with those of farmers and foresters that dreastic measures should be taken to settle their conflicting differences. For the purpose of solving the above-mentioned problems and at the same time, of developing sound hunting practices in the long run, I hereby make two suggestions. 1. The Establishment of the Hunting License Test System It is desirable to issue a license to a prospective hunter after he has met a special qualification and then passed a test so that he may have bits of information needed for his hunting activities. 2. The Introduction of The Revier System The fundamental concept of this system is based on the assumption that the private landowner should reserve a right to the pursuit of game and take responsibility for wildlife management.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.384-391
• /
• 1998

Nutrient removal during stem harvest was evaluated in a one-year rotation willow bioenergy plantation. For the stem nutrient content, the stem biomass and stem nutrient concentration were collected in the winter of 1987-1993 from the established willow plantation at Tully, New York, U.S.A. in 1987. Five willow clones and one hybrid poplar clone were planted. Half of the plots were fertilized annually with $336kg\;ha^{-1}$ N, $112kg\;ha^{-1}$ P, and $224kg\;ha^{-1}$ K. All trees were harvested annually. Mean annual nutrient removals of N, P, K, Ca, and Mg by annual stem harvesting over seven years were respectively 30-70, 4-10, 14-40, 19-59 and $3-5kg\;ha^{-1}$. Fertilized plants exported higher quantities of nutrients than non-fertilized ones. Nontheless, quantities of nutrients exported were well below the quantities supplied by fertilization suggesting that nutrients removal by stem harvesting is not likely to cause a decrease in soil fertility. However, in non-fertilized plots, the amount of nutrients removed could result in decrease of nutrient availability and soil fertility over the long-term. An evaluation of the clones revealed that clone SV1 is the most nutrient efficient.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.243-264
• /
• 2018

Although the worldwide battery market is recently spurring the development of lithium secondary battery, lead acid batteries (rechargeable batteries) which have good-performance and can be reused are consumed in a wide range of industry fields. However, lead-acid batteries have a serious problem in that deterioration of a battery makes progress quickly in the presence of that degradation of only one cell among several cells which is packed in a battery begins. To overcome this problem, previous researches have attempted to identify the mechanism of deterioration of a battery in many ways. However, most of previous researches have used data obtained in a laboratory to analyze the mechanism of deterioration of a battery but not used data obtained in a real world. The usage of real data can increase the feasibility and the applicability of the findings of a research. Therefore, this study aims to develop a model which predicts the battery deterioration using data obtained in real world. To this end, we collected data which presents change of battery state by attaching sensors enabling to monitor the battery condition in real time to dozens of golf carts operated in the real golf field. As a result, total 16,883 samples were obtained. And then, we developed a model which predicts a precursor phenomenon representing deterioration of a battery by analyzing the data collected from the sensors using machine learning techniques. As initial independent variables, we used 1) inbound time of a cart, 2) outbound time of a cart, 3) duration(from outbound time to charge time), 4) charge amount, 5) used amount, 6) charge efficiency, 7) lowest temperature of battery cell 1 to 6, 8) lowest voltage of battery cell 1 to 6, 9) highest voltage of battery cell 1 to 6, 10) voltage of battery cell 1 to 6 at the beginning of operation, 11) voltage of battery cell 1 to 6 at the end of charge, 12) used amount of battery cell 1 to 6 during operation, 13) used amount of battery during operation(Max-Min), 14) duration of battery use, and 15) highest current during operation. Since the values of the independent variables, lowest temperature of battery cell 1 to 6, lowest voltage of battery cell 1 to 6, highest voltage of battery cell 1 to 6, voltage of battery cell 1 to 6 at the beginning of operation, voltage of battery cell 1 to 6 at the end of charge, and used amount of battery cell 1 to 6 during operation are similar to that of each battery cell, we conducted principal component analysis using verimax orthogonal rotation in order to mitigate the multiple collinearity problem. According to the results, we made new variables by averaging the values of independent variables clustered together, and used them as final independent variables instead of origin variables, thereby reducing the dimension. We used decision tree, logistic regression, Bayesian network as algorithms for building prediction models. And also, we built prediction models using the bagging of each of them, the boosting of each of them, and RandomForest. Experimental results show that the prediction model using the bagging of decision tree yields the best accuracy of 89.3923%. This study has some limitations in that the additional variables which affect the deterioration of battery such as weather (temperature, humidity) and driving habits, did not considered, therefore, we would like to consider the them in the future research. However, the battery deterioration prediction model proposed in the present study is expected to enable effective and efficient management of battery used in the real filed by dramatically and to reduce the cost caused by not detecting battery deterioration accordingly.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.