• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1073-1077
• /
• 2010

This paper proposes a new 4-dimensional(4D) constellation-rotation(CR) method which obtains diversity gain of 4 under Rayleigh fading channels. The proposed scheme uses two consecutive CR operations for the constellation of QAM signals unlike a conventional 2-dimensional(2D) CR method using only one CR operation. The computer simulation results show that the new method outperforms the conventional one even more as both the channel code rate and the erasure ratio increase. In a point of system flexibility, the proposed scheme has a great advantage since the conventional 2D CR scheme can be simply implemented by only changing rotation angle values used in the proposed scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.132-138
• /
• 2008

Recently, mastering processes for high density optical disc such as Blu-ray disc rely on electron beams, which are operable in only vacuum. In the mastering process, one of the most important tasks is to design precision stages for providing precise positioning of the works with respect to the source in a high vacuum environment. In this paper, we have developed a precision rotation table usable in the electron beam mastering. The rotation table adopted air bearings for a high positioning repeatability and velocity stability. The air leakage from the air bearings has been minimized by employing the differential exhaust scheme using three steps of air drain. The design parameters such as diameters of exhaust lines, seal lengths, and pumping speeds were decided according to the optimization method using genetic algorithm. The performance on the vacuum level of the rotation table was evaluated experimentally and theoretically. The results indicate that a vacuum level of $10^{-4}$ Pa is achieved with operation of air bearings in a vacuum chamber, which is sufficient for the electron beam mastering.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2016

Image rotation is one of main pre-processing step in image processing or image pattern recognition. It is implemented with rotation matrix multiplication. However it requires lots of floating point arithmetic operations and trigonometric function calculations, so it takes long execution time. We propose a new high speed image rotation algorithm without two major time-consuming operations. It use just 2 shear translation operations, so it is very fast. In addition, we apply a parallel computing technique with CUDA. CUDA is a massively parallel computing architecture using prevailed GPU recently. As GPU is a dedicated graphic processor, it is exellent for parallel processing of pixels. We compare the proposed algorithm with the conventional rotation one with various size images. Experimental results show that the proposed algorithm is superior to the conventional rotation ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.693-699
• /
• 2016

The simulators for pump operation developed by domestic or overseas research have been developed for dynamic analysis or operator training purposes. However, previous developed simulators focused on the operators so they are unsuitable for logic designers or commissioning engineers who need to change the operation conditions or logics arbitrarily. In addition, the simulator for two or more condensate pumps' operation, which can be used easily by plant designers or operators, has not been developed. Accordingly, this paper suggests a simulation method that can be used easily for plant designers or operators using MATLAB Simulink. This suggestion helps users who can use MATLAB to implement ANSI/ISA S5.2, which is applied mainly for DCS (Distributed Control System). In addition, to implement the logics specified in the CODE, Sub-Systems were created for the block and evaluated to determine if they can be used in the simulator. In the working level stage using the suggested method, all error possibilities that might occur during the three pumps' rotation operation could be verified with the suggested simulator during the design stage or before operation.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.435-441
• /
• 2004

A drum bioreactor was used for the treatment of sandy soil contaminated with three kinds of aromatic compounds (phenol, naphthalene, and phenanthrene), and its performance was evaluated in two different operation modes; intermittent and continuous rotation of drum. When the drum bioreactor was operated with one rotation per day, the microbial growth was relatively low, and most of the compounds remaining in soil, except naphthalene of 90 mg/kg dry soil, disappeared mainly due to volatilization. In contrast, when the drum was continuously rotated at 9 rpm (rotation/min), the number of microorganisms was drastically increased and nitrate was consumed for growth as a nitrogen source. Phenol and phenanthrene were removed at rates of 56.7 mg/kg dry soil/day and 3.2 mg/kg dry soil/day, respectively.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.1
• /
• pp.22-26
• /
• 2011

Purpose: To report the effectiveness of adding distal fibular external rotation stress test on the traditional lateral stress Cotton test in evaluating distal tibiofibular syndesmotic injuries. Materials and Methods: We evaluated syndesmotic injuries with intraoperative stress test during treating ankle fractures from March 2009 to September 2010. External rotation of distal fibula using small elevator was added on traditional stress test in case of suspicious syndesmotic injury. We retrospectively reviewed and compared the results of each test in 44 cases for which we tried both tests. Results: In 9 cases of positive traditional lateral stress tests, positive results were obtained in all cases by additional external rotation tests. In 21 cases of negative traditional stress tests, additional stress tests results were also negative. But there were 10 cases of positive additional tests and 4 of negative additional tests in equivocal results cases by the traditional stress tests. Conclusion: Using additional external rotation stress test in case of equivocal test result by the traditional lateral stress Cotton test for evaluation of syndesmotic injury during operation for ankle fracture can be a supplemental method to clarify syndesmotic injury needs fixation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.259-265
• /
• 2009

In the traditional percussion locks of small arms, a firing pin is struck by a hammer rotating on a single center of rotation, which makes the percussion mechanism simple and reliable. In order to strike the firing pin by the hammer, however, the firing pin should be located within the radius of rotation of the hammer. As the distance between the striking point of the firing pin and the center of rotation of the hammer becomes longer, the radius of rotation of the hammer should also be increased, which results in the increase of the volume and weight of the small arms because the hammer needs the more space for its operation inside of the small arms. In this paper, a link type percussion lock was newly proposed in order to overcome the limitation of designing small arms when using traditional percussion locks, as mentioned above. The link type percussion lock was modeled by using multi-body dynamics software and designed to satisfy the requirements such as striking force level of the hammer exerting on the firing pin enough to detonate the percussion cap of ammunitions and the safety on the accidental drop. It was applied to the newly developed dual-barrel weapon system, in which the weight and overall length are important design factors, and verified by durability test and drop test on the ground.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.91-103
• /
• 2018

Conventional inertial measurement units cannot be used in the spinning vehicle with high rotation rate due to gyro's narrow operation range. By the way, angular acceleration can be measured using the accelerometer array distributed in the vehicle. This paper derives a mechanization for the gyro-free INS in the navigation frame, and proposes a gyro-free INS algorithm based on the derived mechanization. In addition, the proposed algorithm is used to estimate angular velocity, attitude, velocity, and position of a spinning vehicle with high rotation rate. A MATLAB-based software platform is configured in order to show validation of the proposed algorithm. The reference trajectory of a spinning vehicle at 3 round per second, 30 round per second are set up, and the outputs of accelerometer are generated when triads of accelerometer are located at the origin and all the axes. Navigation results of the proposed algorithm for the generated output are presented. The results show that the proposed navigation algorithm can be applied to the spinning vehicle with high rotation rate.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.309-317
• /
• 2022

In this paper, we propose a machine learning-based copy-move forgery detection network with dual branches. Because the rotation or scaling operation is frequently involved in copy-move forger, the conventional convolutional neural network is not effectively applied in detecting copy-move tampering. Therefore, we divide the input into rotation-invariant and scaling-invariant features based on the wavelet coefficients. Each of the features is input to different branches having the same structure, and is fused in the combination module. Each branch comprises feature extraction, correlation, and mask decoder modules. In the proposed network, VGG16 is used for the feature extraction module. To check similarity of features generated by the feature extraction module, the conventional correlation module used. Finally, the mask decoder model is applied to develop a pixel-level localization map. We perform experiments on test dataset and compare the proposed method with state-of-the-art tampering localization methods. The results demonstrate that the proposed scheme outperforms the existing approaches.

• Clinics in Shoulder and Elbow
• /
• v.22 no.2
• /
• pp.93-99
• /
• 2019

Background: Modified Phemister operation has been widely used for the treatment of acute acromioclavicular (AC) joint dislocation. Additionally, the use of suture anchor for coracoclavicular (CC) fixation has been reported to provide CC stability. This study was conducted to evaluate the clinical and radiological results of a modified Phemister operation with CC ligament augmentation using suture anchor for acute AC joint dislocation. Methods: Seventy-four patients underwent the modified Phemister operation with CC ligament augmentation using suture anchor for acute AC joint dislocation and were followed-up for an average of 12.3 months. The visual analogue scale (VAS), range of motion, Constant score, and Korean shoulder scoring system (KSS) were used for clinical assessment. Acromioclavicular interval (ACI), coracoclavicular distance (CCD), and acromioclavicular distance (ACD) were obtained to evaluate the radiological assessments. Results: At the last follow-up, the mean VAS Score was 1.7 points, the mean joint range of the forward flexion was $164.6^{\circ}$, external rotation at the side was $61.2^{\circ}$ and internal rotation to the posterior was a level of T12. The mean Constant score and the mean KSS was 82.7 points and 84.2 points, respectively. At the mean ACI, CCD, and ACD, significant differences were found preoperatively and at the last follow-up. When the ACI, CCD, and ACD were compared with the contralateral unaffected shoulder at the last follow-up, the affected shoulders had significantly higher values. Conclusions: The modified Phemister operation with CC ligament augmentation using suture anchor is clinically and radiologically effective at acute AC joint dislocation.