• Journal of the Korean Society of Combustion
• /
• v.20 no.2
• /
• pp.1-13
• /
• 2015

Drying, which is the oldest and most energy-intensive process, is an essential process for treatment of solid product. The specific procedure to design and evaluate the dryers, which are a rotary kiln dryer and a flash dryer, in case of drying the high-moisture coal was described. From determination of size to the heat and mass balance in one-dimensional model were conducted to evaluate the performance of dryers. Heat consumption, inlet gas temperature and size of the dryers were compared between a rotary kiln dryer and a flash dryer. Further considerations to evaluate the reactor elaborately were also discussed. Performance simulation of dryers along with the design procedure described here will provide helpful basis for understanding the concept of reactor design.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.575-579
• /
• 2007

Sludge disposal technology has been studied with many researchers since disposal of sewage sludge has been a social problem. The current technologies include incineration, carbonization, pyrolysis, landfilling and fertilization. However, all of these processes require a dry process, because sewage sludge with more than 80% high water content is difficult to be used as a raw material. This study has the purpose to establish the optimal operation conditions and the technology as changing the variables: kiln residence time, sludge load, dryer temperature, by using the previous study that is rotary kiln type dryer designed as a numerical simulation study. As the results, optimum conditions are determined as follows: kiln residence time, sludge load, dryer temperature are $62.5kg/m^3{\cdot}hr$, 26.2 min, $330^{\circ}C$, respectively. Content of water, drying efficiency, weight loss, volume loss show that the results are $10{\pm}2$, 88, 80, 60%, and the dried sludge is released by a dryer below 10 mm.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.289-292
• /
• 2014

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.29-37
• /
• 2008

The objective of this research is to evaluate the optimum treatment methods for disposal sludge cake at different temperatures and periods of time. The disposal dehydrated sewage cake used in this study was obtained from N wastewater treatment plant in the P City. This system consists of continuous conveyer thermal dryer and pyrolysis. The continual conveyer thermal dryer was operated to evaluate the optimum conditions with temperature settings, ranges from 130 to $180^{\circ}C$, loading rates of 650~750 kg/hr and operating times of 110~120 minutes. The continual pyrolysis was also operated to evaluate the optimum conditions with temperature settings, ranges from 650 to $750^{\circ}C$, loading rates of 100~158 kg/hr and operating times of 20~40 minutes. The sewage sludge cake has a moisture content of 78~80% (wt) which decreased up to 1~3%(wt) resulted in breaking of cell wall after operating the continuous conveyer thermal dryer and pyrolysis. Important parameters which were operating times, moisture contents, loading rates, conveyer velocities and rotary velocities effects on the thermal kinetics and dynamics were investigated to evaluate the optimum conditions for the continual thermal dryer and pyrolysis.