• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.105-114
• /
• 2008

본 연구에서는 고정익과 회전익의 두 가지 모드로 운용되는 canard rotor wing(CRW) 항공기에 대한 사이징과 성능해석 프로그램이 개발되었다. 개발된 프로그램은 기존의 항공기 데이터를 이용하여 각 모드에 대한 검증을 수행하였고 정찰 임무형상에 대해 최적설계 문제를 정의하였다. canard rotor wing의 로터 최적화를 위해 고정익 모드와 회전익 모드에 대해 가중치를 이용한 다중목적함수를 구성하였다. 6개의 서로 다른 가중치와 설계제약조건에 대해 최적설계가 수행되었고 그 결과 개선된 로터형상을 도출하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.46-53
• /
• 2007

In this paper, a guidance law for vision-based automatic landing of unmanned aerial vehicles (UAVs) is proposed. Automatic landing is a challenging but crucial capability for UAVs to achieve a fully autonomous flight. In an autonomous landing maneuver of UAVs, the decision of where to landing and the generation of guidance command to achieve a successful landing are very significant problem. This paper is focused on the design of guidance law applicable to automatic landing problem of fixed-wing UAV and rotary-wing UAV, simultaneously. The proposed guidance law generates acceleration command as a control input which derived from a specified time-to-go ($t_go$) polynomial function. The coefficient of $t_go$-polynomial function are determined to satisfy some terminal constraints. Nonlinear simulation results using a fixed-wing and rotary-wing UAV models are presented.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.22-31
• /
• 2005

본 연구에서는 회전익 항공기의 수직 이/착륙 성능과 고정익 항공기의 고속/고효율 순항 비행 성능을 모두 가지는 Canard Rotor/Wing 항공기 최적 형상설계를 수행하였다. CRW 항공기의 특징인 로터/날개 가변 방식과 로터 회전 시 팁 제트를 통하여 회전력을 얻는 점 때문에 기존의 회전익 또는 고정익 사이징 프로그램만으로는 바로 적용이 어렵고 Reaction Driven 로터에 대한 해석 모듈의 추가와 회전익/고정익 비행 모드 해석이 혼합되어야 한다. 따라서 기존의 사이징 프로그램을 바탕으로 로터 성능, 덕트 유동, 엔진 유동 해석 코드를 연결하여 Reaction Driven 로터 성능 해석이 가능하게 하였으며, 비행체 외형상 특징과 임무별 비행특징이 반영되도록 사이징 프로그램을 개발하였다. 1500 lbs급 소형 무인기에 대하여 비행체 사이징을 수행하고 성능에 크게 영향을 미치는 설계변수를 파악하여 최적화 문제를 구성하였고 전역적 최적화 기법을 이용하여 최소 중량을 가지는 CRW 항공기의 최적형상을 도출하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.27-34
• /
• 2004

In the Smart UAV Development Program, one of the 21c Frontier R&D Program, the tiltrotor has been studied as the concept of vehicle. The tiltrortor aircraft take-off and land in rotary wing mode like conventional helicopter, and cruise in fixed wing mode like conventional propeller airplane. For the conversion of the flight mode from helicopter to airplane, the nacelle located at wing tip has to be tilted from about 90 degrees of helicopter mode to about 0 degree of airplane mode. In this study, the aerodynamic characteristics of the wing with tilted nacelle is investigated using computation fluid dynamics technique. In order to feature out aerodynamic interferences between wing and nacelle, the flow calculations are conducted for the wing and the nacelle separately and for the combined geometry of wing and nacelle, respectively. Through this computations, not only the aerodynamic data-base for the wing-nacelle is constructed but also its contribution to the configuration design of the wing-nacelle is anticipated.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.37-44
• /
• 2017

In this study, in order to prevent cavitation in a variable swash-plate type hydraulic pump, a basic model impeller has been applied to a new pump, and the impeller shape has been optimized through flow analysis. Based on the analysis results, we could propose an impeller shape with high efficiency and low possibility of cavitation in comparison with the basic model. The simplification of the basic shape of the impeller of the hydraulic pump was performed in three parts in the order of hub shape, wing, and curvature, and eight design parameters were defined to satisfy the design requirement. Compared with the initial model of the impeller, when the differential pressure of the optimum model increased, the efficiency was improved. It achieved the goal of design improvement because cavitation did not occur under the rated operating conditions.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권1호
• /
• pp.19-24
• /
• 2003

Design and test results of a VRAG(Vacuum Rotary Arc Gap) switch were presented. To control the damage of electrodes caused by the vacuum arc, Lorentz's force by the radial magnetic field between spiral electrodes was used to rotate the vacuum uc. VRAG switch electrodes were made of the material of CuCr and OFHC. Gap distance between two spiral type electrodes for the rotation of the arc discharge is 8, 10, 12mm. In the cathode, one trigger electrode was inserted into each spiral wing. Normal operation of the VRAG switch was confirmed with 10.6[$mutextrm{s}$]of trigger delay and 2~3[$mutextrm{s}$] of the jitter time. The speed of the vacuum arc was measured to be 0.6 ~ 1[km/s] by a motion analyzer.

• 한국항공운항학회지
• /
• 제30권1호
• /
• pp.38-43
• /
• 2022

As the use of unmanned aerial vehicles increases, in order to expand the operability of the unmanned aerial vehicle, it is essential to develop an unmanned aerial vehicle traffic management system, and to establish the system, it is necessary to analyze the integrated navigation performance of the unmanned aerial vehicle to be operated. Integrated navigation performance is affected by various factors such as the type of unmanned aerial vehicle, flight environment, and guidance law algorithm. In addition, since a large amount of flight data is required to obtain high-reliability analysis results, efficient and consistent flight scenarios are required. In this paper, a flight scenario that satisfies the requirements for integrated navigation performance analysis of rotary and fixed-wing unmanned aerial vehicles was designed and verified through flight experiments.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.79-86
• /
• 2019

회전익 항공기의 충돌방지등은 항공기 운용 중 충돌을 방지하기 위한 목적으로 사용되며, 비행 안전성을 확보하기 위한 핵심 구성품이다. 한국형 기동헬기(KUH)의 충돌방지등은 상부등과 하부등으로 구성되며, 충돌방지등 전원공급기와 항공기에 함께 장착되어 운용된다. 그리고 충돌방지등은 밝기 조절 및 선택적 점등이 가능한 이중 구조로 설계되었다. 항공기 납품 후 운용 과정에서 충돌방지등의 이상점 등이 발생하였고, 이러한 현상을 해소하기 위하여 항공기 체계/구성품 단위의 종합 검토를 수행하였다. 본 논문에서는 충돌방지등의 이상점등이 발생한 원인을 분석하였고, 설계 개선방안을 제시하였다. 그리고 설계 개선방안에 대한 타당성을 구성품 및 항공기 체계 지상 및 비행시험으로 입증하였다.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.137-146
• /
• 2001

According to the advanced development of Light Weight Torpedo, the overall items related with the parachute type and gore layout and air stabilizer of the parachute for fixed and rotary wing aircraft are described in this paper. Also, the drag-area which should satisfy the firing envelope, parachute inflation characteristics, stability of parachute and torpedo in airdropping, water entry impact on torpedo and parachute constituted the principle design factors. The important trial and errors occurred in the step of performance of the parachute for fixed and rotary wing aircraft are investigated and analyzed.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.61-67
• /
• 2017

The Nose Landing Gear(NLG) of Rotary Wing Aircraft is an essential equipment in Landing System for pilot to perform a flight mission. It supports the fuselage at ground and absorbs the impact from the ground when landing, thereby, these functions sustain operational capability for pilot and crew. However, the A aircraft caused stick-slip behavior when it was stationed on the ground. Therefore, this paper summarizes pilot comment in operation which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test.