• 아시안잔디학회지
• /
• 제6권1호
• /
• pp.11-22
• /
• 1992

To determine the use of waste materials as root zone soil mixtures for turfgrass culture, the effects of paper mill sludge and briquet ash on physical and chemical properties of soil and growth of turfgrasses were examined. Three turfgrass species of zoysiagrass(Zoysia japonicaSteud.). kentycky bluegrass(Poa pratensis L. 'Ram I') and creeping bentgrass(Agrostis panistris Huds 'Persucross') were cultured in 32cm diameter plastic pots containing various soil mixtures. The basic ingredients used for mixtures included sand(SD), field soil(SL), paper mill sludge(PS), sphagnum peat moss(PM) and briquet ash(BA). Seven combinations using these ingreients were mixed in different percentage by volume as follows: SD+SL+PM(80:10.10), SH+SL+PS(80:10:10), SD-PM(80:20), SD+PS (80:20), SD+BA(80:20), SD+BA+PM(60:20:20) and SD+BA+PS(60:20:20). 1. Paper mill sludge showed pH of 6.6, more than 30% of organic matter content, and higher concentrations of total N, P, k, Ca, Mg and CEC. Bulk density, fild moisture capacity and electrical conductivity of soil mixtures were increased by the comimation of 10~20% PS by volume. 2. Briquet ash showed pH of 8.0, and higher levels of P, k, Ca and Mg than those of field soiks. Bulk density, field moisture capacity and hardenss of soil mixtures were increased but vertical water flow rate and electrical conductivity were decreased by the combination of 20% BA by volume. 3. Phytotoxic effects of PS and BA on growth of turfgrasses were not found. Shoot growth of all three species was higher in soil combination of SD+BA+PS than that of SD+SL+PM added with fertilizer. However, root growth was better in soil mixtures combined with PM. Soil mixtureomposed of 60% SD, 20% BA and 20% PS by volume was most effective on growth of all three species. 4. Paper mill sludge resulted in higher N level in the leaf tissue. The contents of heavy metals such as Cd and Ph did not vary significantly among soil mixtures and species. However, the Mn level was 2~3 times higher in plants growh in mixtures containing PM compared with others, and especially it was higher in creeping bentgrass than other species.

• 한국농공학회논문집
• /
• 제56권2호
• /
• pp.37-46
• /
• 2014

Water for crop growth were supplied by irrigation in protected cultivation and these are accumulated in the soil and utilized for crop evapotranspiration. The study for analyzing soil moisture characteristics is necessary for adequate irrigation water and soil water management in protected cultivation. Soil moisture content, irrigation water quantity and meteorological data were monitored to analyze soil moisture increment and extraction characteristics in terms of soil layers and cucumber crop growth stages. In first cropping period, the total amount of irrigation water was 5.07 mm/day, soil moisture increment was 4.82 mm/day and soil moisture extraction was 5.56 mm/day. In second cropping period, the total amount of irrigation water was 4.82 mm/day, soil moisture increment was 4.65 mm/day and soil moisture extraction was 4.73 mm/day. Soil moisture extraction rate from 0 to 75 cm is 90.3 % in first cropping period and 79.1 % in second cropping period. The majority irrigation water were consumed in root zone, however, about 15 % of soil moisture were losses by infiltration in lower soil layer. Soil moisture extraction and extraction pattern of cucumber crop calculated in this study can be utilized as a basic data for irrigation water management in protected cultivation.

• 한국농공학회지
• /
• 제24권1호
• /
• pp.63-72
• /
• 1982

To maintain an optimum condition for the plant growth on upland soil, the irrigation planning after the natural rainfall should be given enormous considerations on the rainfall effectiveness. This study has been intended to develop the computer model for estimating the effec- tiveness of the rainfall. The computer model should also estimated the infiltration due to the rainfall and the soil moisture deficiency at the root zone of the plant. For this purpose, the experiments of infiltration using rainfall simulator and the observations of the change of soil moisture content before and after rainfall were carried out. Needed input data for the developed model include final infiltration capacity and field capacity of the soil, porosity of the top soil, root depth of the plant, rainfall intensity and duration, and the Horton's decay coefficient. Among the needed input data for the developed model, final infiltration capacity and Horton's decay coefficient were determined by the experiments of infiltration. And from the result of the experiments, it is found that there is a great correlation between initial infiltration capacity and initial moisture content. And it is also found that the infiltration due to rainfall can be estimated with the Horton's equation. The developed model was tested by the experimental data with two rainfall intensities. Tests were conducted on the different root depths at each rainfall. Observed and estimated effective rainfalls were found to have great correlation. The result of the experiments showed that the effectiveness of the rainfall were 100%, so the comparisons were conducted by the comsumption rates of infiltration at each depth. The developed model can be also used for estimating the deficiency of rainfall, if the rainfall is not sufficient to the needed soil moisture. But, test was not carried out.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.31-40
• /
• 2017

The aim of this study is to estimate net irrigation requirements for red pepper during growing period using soil moisture model. The soil moisture model based on water balance approach simulates soil moisture contents of 4 soil layers in crop root zone considering soil moisture extraction pattern. The LAMP (Land-Atmosphere Modeling Package) high resolution meteorological data provided from National Center for AgroMeteorology (NCAM) was used to simulate soil moisture as the input weather data. Study area for the LAMP data and soil moisture simulation covers $36.92^{\circ}{\sim}37.40^{\circ}$ in latitude and $127.36^{\circ}{\sim}127.94^{\circ}$ in longitude. Soil moisture was monitored using FDR (Frequency Domain Reflectometry) sensors and the data were used to validate the simulation model from May 24 to October 20 in 2016. The results showed spatially detailed soil moisture pattern under different weather conditions and soil texture. Net irrigation requirements were also different by location reflecting the spatially distributed weather condition. The average of the requirements was 470.7 mm and averages about soil texture were 466.8 mm, 482.4 mm, 456.0 mm, 481.7 mm, and 465.6 mm for clay loam, sandy loam, silty clay loam, clay, and sand respectively. This study showed spatial differences of soil moisture and the irrigation requirements of red pepper about spatially uneven weather condition and soil texture. From the results, it was demonstrated that high resolution meteorological data could provide an opportunity of spatially different crop water requirement estimation during the irrigation management.

• 한국토양비료학회지
• /
• 제35권1호
• /
• pp.1-11
• /
• 2002

옥수수 뿌리 성장에 미치는 토양통과 경운의 영향을 구명하기 위하여 3년 동안 일리노이 중부지방의 몇 개 토양통이 다른 옥수수 포장에서 뿌리 분포를 관찰하였다. 무경운과 경운된 포장에서 깊이 75 cm Minirhizotron 기술에 의하여 Video로 촬영을 한 후 뿌리 분포를 관찰하였다. 토양 경작층의 뿌리 분포는 생육 초기 증가하였고, 이후 늦은 여름에는 수분이 고갈되면서 감소하였다. 본 실험에서 뿌리 분포가 토양통에 따라 차이는 보이지 않았으나 토양통에 따른 분포의 차이는 토양의 유효수분 저장용량에 따라 차이를 보였다. 토양의 투수 속도가 빠른 무경운에서의 뿌리분포가 경운에서의 분포보다 많았다. 생육기간 중 심토 층에서의 옥수수 뿌리는 경운포장보다 전 작물의 뿌리통로를 이용하여 생장하는 무경운 포장에서 2-3주 일찍 관찰되었다. 결론적으로 옥수수 뿌리 분포는 토양통보다는 경운에 의한 영향이 클 것으로 생각되었다.

• 한국농공학회지
• /
• 제27권1호
• /
• pp.62-70
• /
• 1985

The purpose of this study is to investigate the basic data such the total, the daily maximum, and the peak stage of consumptive use of water and also the soil moisture extraction pattern for irrigation plan of tobacco during the growing period. The plots at which this study was conducted are divided into three fertilization levels of 30g, 60g, and 90g. Each block for three levels is divided as vinyl mulching and irrigation plot, vinyl mulching and nonirrigation plot, and nonmulching and irrigation plot. The results obtained are summarized as follows: 1. The evapotranspiration amount of mulching-irrigation plots are similar to that of mulching-nonirrigation plots. While, the evapotranspiration amount of mulching plots are different obviousely from that of nonmulching plots. Therefore, a significance was recognized between the mulching plots and the nonmulching plots. 2. The amount of evapotranspiration in case of 60g and 90g fertilization level was larger than that of 30g. But the 60g plots and the 90g plots showed little differences. 3. In the total amount of evapotranspiration for each of the experimental plots during the growing period, nonmulching-irrigation plot showed the largest value of 332.9mm, second the mulching-irrigation plot, 284. 9mm, and the mulching-nonirrigation plot, the smallest as 255. 9mm. 4. In the monthly average amount of evapotranspiration for each of the treatment plots, the mulching-irrigation the mulching-nonirrigation, and the nonmulching-irrigation plot showed 3. 6mm, 3. 2mm and 4. 2mm respectively. The daily maximum amount of evapotranspiration showed 5. 1mm, 4. 5mm, and 6.4mm for the mulching-irrigation, the mulching-nonirrigationl, and the nonmulching-irrigation plot respectively. 5. It was confirmed that the higher correlationship exists between the weight of dried leaves and the amount of evapotranspiration, and between the weight of dried leaves and the coefficient of evapotranspiration with the function of logarithms. The coefficient of evapotranspiration have a tendency to increase in proportion to the leaf area index. 6. The maximum coefficient of evapotranspration and the largest leaf area index showed 1. 45 and 5.5 respectively. The stage appeared maximum values was assumed to be before and after flowering. 7. The soil moisture extraction pattern has changed by the depth of root zone for the tobacco's growing. The soil moisture extraction influenced on the 20cm depth of soil after 15 days passed, the 30cm depth after 25 days passed and the whole root zone after 45 days passed from planting. It was shown in the only mulching-irrigation plot after S5days passed from planting that the rate of soil moisture extraction of 20cm layer was larger than that of 10cm layer.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• 한국농공학회지
• /
• 제43권1호
• /
• pp.53-65
• /
• 2001

To estimate agricultural water demand, many factors such as weather, crops, soil, cultivation method, crop coefficient and cultivation area, etc. must be considered. But it is not easy to estimate water demand in consideration of these factors, which are variable according to growth stage and regional environment. This study provides estimation system for agricultural water demand(ESAD) in order to estimate water demand easily and accurately, and arranges all factors needed for water demand estimation. This study identifies the application of estimation system for agricultural water demand with the data observed in the other studies, and analyzes nationwide agricultural water demand. The results are as follows. 1) The practice of different rice cultivation in the paddy field resulted in different water demands. Water depth and infiltration ratio in paddy are the most important factors to estimate water demand. The water depths in paddy simulated by ESAD is very similar to the observed ones. 2) Water demand of upland crops varies with the crops, soil, etc.. Effective rainfall estimated by daily routing of soil moisture varies according to the crops, soil, and effective soil zone(root depth). As crop root become grown, effective rainfall and an amount of irrigation water has been increased. 3) The current unit water demand of upland crops applied as 500mm or 550mm to estimate water demand does not reflect the differences caused by the crops, regional surrounding, weather condition, etc. Results from ESAD for the estimation of water demand of upland crops show that ESAD can simulate the actual field conditions reasonably because it simulates the actual irrigation practices with the daily routing of soil moisture.

• 생물환경조절학회지
• /
• 제11권1호
• /
• pp.18-22
• /
• 2002

대목종류별 병해는 양액재배에서 토양재배보다 감소하였으며, 특히 토양재배에서 39.9∼53.3%발생하였던 덩굴마름병은 양액재배에서는 거의 나타나지 않았다. 발효과 발생은 신토좌에서 가장 높았고, 흥토좌, 자근묘 순이었는데, 양액재배에서의 발효과 발생은 대목 종류와는 관계없이 토양재배보다 급격하게 감소하여, 토양 수분의 급격한 변동이 없이 적절한 수분 관리가 이루어지면 대목 종류와는 관계없이 발효과가 저하될 수 있는 것으로 판단되었다.

• 한국농공학회논문집
• /
• 제59권2호
• /
• pp.37-47
• /
• 2017

In this study, we analyzed the variability of irrigation water amounts based on the combination of various crops and soil textures using the Irrigation Water Management Model (IWMM). IWMM evaluates the degree of agricultural drought using the Soil Moisture Deficit Index (SMDI). When crops are damaged by the water scarcity under the drought condition indicating that the SMDI values are in negative (SMDI<0), IWMM irrigates appropriate water amounts that can shift the negative SMDI values to "0" to crop fields. To test the IWMM model, we selected the Bandong-ri (BDR) and Jucheon (JC) sites in Gangwon-do and Jeollabuk-do provinces. We derived the soil hydraulic properties using the near-surface data assimilation scheme form the Time Domain Reflectrometry (TDR)-based soil moisture measurements. The daily root zone soil moisture dynamics (R: 0.792/0.588 and RMSE: 0.013/0.018 for BDR/JC) estimated by the derived soil parameters were matched well with the TDR-based measurements for validation. During the long-term (2001~2015) period, IWMM irrigated the minimum water amounts to crop fields, while there were no irrigation events during the rainy days. Also, Sandy Loam (SL) and Silt (Si) soils require more irrigation water amounts than others, while the irrigation water were higher in the order of radish, wheat, soybean, and potato, respectively. Thus, the IWMM model can provide efficient irrigation water amounts to crop fields and be useful for regions at where limited water resources are available.