• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.34.1-34.7
• /
• 2020

Objectives: This study evaluated by using micro-computed tomography (micro-CT) the filling ability and sealer apical extrusion promoted by a new Sealer Injection System (SIS; Angelus) with side openings needle, in comparison with the conventional injection system, associated with a new ready-to-use calcium silicate-based sealer (Bio-C Sealer). Materials and Methods: Acrylic resin models containing a main curved artificial canal and 3 simulated lateral canals in apical, middle and cervical thirds were used. The main root canals were prepared using a rotary system up to size 35.05. The canals were filled with Bio-C sealer by using a single cone technique and the conventional delivery system or SIS. Samples were scanned in micro-CT. The percentage of voids throughout the entire extension of the main root canal and in each third of the lateral canals, besides the apical extrusion of the sealer was calculated. Data were submitted to t-test (p < 0.05). Results: There was no difference between both systems in the main root canals filling. Although the volume percentage of voids was similar in the apical and middle thirds of lateral canals, SIS had the greatest filling ability of the cervical third lateral canal. Moreover, the conventional system showed the highest apical extrusion of the sealer. Conclusions: The conventional and SIS obturation systems had an appropriate filling ability of the main root canal. SIS had the best filling of the cervical third of the lateral canals, besides lower sealer apical extrusion, suggesting its clinical indication.

• 한국산림과학회지
• /
• 제108권2호
• /
• pp.269-275
• /
• 2019

본 연구에서는 뿌리 수술과 수목 이식 현장에서 단근 부위에 처리하는 뿌리연고에 대한 상처 반응 및 세근 발달을 3종의 수종에서 비교하였다. 2014년 5월부터 2016년 11월까지 경상북도 상주시에 식재된 소나무, 벚나무, 느티나무 성목에서 직경 2~4 cm에 해당하는 뿌리를 절단하고 상처 부위를 바셀린과 유기질 비료로 연고 처리하여 6개월이 경과한 후, 시료를 채취하여 세근 생장량을 조사하였다. 단근 후 세근 발달은 전반적으로 느티나무와 벚나무에서 우수하였지만 소나무에서는 저조하였다. 세근 생장량은 느티나무에서 단근과 유기질 비료 처리구에서 높게 나타났다. 벚나무에서는 처리별로 뚜렷한 효과가 없었다. 이상의 결과는 단근과 상처 처리에 대한 세근 발달이 수종별로 상이하므로 단근 후 수종별로 처리방법의 세분화가 필요함을 시사한다.

• Journal of Plant Biology
• /
• 제26권4호
• /
• pp.207-216
• /
• 1983

Mature embryo and developing seedlings of Ginkgo biloba L. were embedded in a paraplast and serially sectioned at 10${\mu}{\textrm}{m}$ to examine vascular differentiation and vascular transition. Procambium and protophloem formed a continuous system along the epicotylhypocotyl root axis and cotyledons in mature embryo, whereas protoxylem was differentiated discontinuously in the cotyledons and rarely in the upper hypocotyl. The traces of the first and second leaf primordia apeared almost at the same time oppositely to each otehr at the epicotyl and alternately with the cotyledon traces in the upper hypocotyl. The trace differentiated bidirectionally toward the epicotyl and root tips. the young root initially formed a diarch xylem. Then, as the traces of the first and second leaves were superimposed, the diarch xylem. Then, as the traces of the first and second leaves were superimposed, the diarch xylem of the root was changed totriarch and tetrarch xylem, respectively. On the formation of primary vascular system of Ginkgo biloba, it is suggested that the primary phloem forms a continuous system throughout the seedling, whereas the primary xylem of the epicotyl is formed independently from that of the root-hypocotyl cotyledon system.

• Weed & Turfgrass Science
• /
• 제7권1호
• /
• pp.76-86
• /
• 2018

Turfgrass species were evaluated for their rooting and foliar characteristics, and their interaction with the soil. The rooting system was divided into three compartments, one above another, such that the top and bottom compartments of the root system could be supplied with a nutrient deprived solution. Exposure of parts of the roots to nitrate deprivation caused a localised retardation of root initiation and extension, compared with zones receiving the full supply of nutrients. This resulted in considerable modification to root form, coupled with a significant depression in foliar growth. The extension of roots was the least affected by the deprivation of potassium. Phosphate and calcium deprivations gave rise to similar responses in root and foliar formation. Results from this study showed that external concentrations of nitrogen, phosphorus, potassium and calcium are required by the root system in varying amounts for optimal growth of roots. Turfgrass coverage and turf quality ratings further reinforced these findings. No significant difference was observed between the different grasses examined here. All three species responded similarly to the deprivation of the various nutrients. Results from this study confirmed that targeted fertilization programs are beneficial and can help reduce cost, chemical usage and prevent leachate and contamination.

• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.76-81
• /
• 2006

The reinforcement of soil shear strength by nylon net as substitute materials simulating a fine root system was evaluated by soil strength parameters(apparent cohesion(c) and internal friction angle(tan${\phi}$), using simple shear tester which clearly depicts shear deformation and controls soil suction. And the results of shear test by using bamboo as a substitute materials simulating a main root system and using nylon net as a substitute materials simulating a fine root system were compared. The reinforcement of soil strength by nylon net are expressed by apparent cohesion more than internal friction angle. In addition the increment of apparent cohesion by nylon net reached a peak in suction 60 $cmH_2O$. Different from with bamboo, the possibility of the change on internal friction angle(tan${\phi}$) caused by the soil water condition was shown in shear strain 20% condition. These results show that the mechanism of reinforcement by substitute materials simulating root system may be different in the condition of various soil water content.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.577-577
• /
• 2003

Microcomputed tomography (MCT) made it possible to investigate the morphology of root canals more accurate. The aim of this study was to compare the effects of four root canal shaping methods, the profile system, the ProTaper system, a combination of these, and stainless steel K-files, in the shaping of the mesial root canals of extracted human mandibular first molars, three-dimensionally using MCT. Eight extracted mandibular first molars were scannde using MTC before and after the root cannals were instrumented. Two specimens were prepared using the Profile system and another two specimens were prepared using MCT before and after the root cannals were instrumented. Two specimens were prepared using the Profile system and another two specimens were prepared using the ProTaper system according to manufactures recommendation.(omitted)

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.115-117
• /
• 2001

대부분의 embedded system에서 hard-disk 대용으로 flash memory를 사용하고 있으며, flash device에 압축 커널이미지와 root file system image를 가지고 있다. Booting 고정 중 커널의 압축이 풀리고 메모리에 로드되어 제어를 넘겨받으면 flash memory 상에 존재하는 root file system image를 ramdisk의 image로 로드하여 시스템은 결국 ramdisk에 root file system을 가지게 된다. Ramdisk 상의 프로그램을 실행하기 위해 메모리로 실행파일 이미지를 copy하는 과정을 피하고 ramdisk 상의 이미지를 바로 프로세스의 virtual memory area에 직접 매핑 시켜 주는 XIP(eXection-In-Place)를 구현함으로써 많은 메모리 절감 효과를 얻을 수 있다. 본 연구에서는 ramdisk를 root file system으로 사용하는 embedded system에서의 XIP 구조를 설계하고 구현하였다.

• 치과방사선
• /
• 제28권2호
• /
• pp.435-459
• /
• 1998

In order to achieve a successful endodontic treatment, root canals must be obturated three-dimensionally without causing any damage to apical tissues. Accurate length determination of the root canal is critical in this case. For this reason, I've used the conventional periapical radiography, Digora/sup (R)/(digital imaging system) and Root ZX/sup (R)/(the frequency dependent type apex locator) to measure the length of the canal and compare it with the true length obtained by cutting the tooth in half and measuring the length between the occlusal surface and the apical foramen. From the information obtained by these measurements, I was able to evaluate the accuracy and clinical usefulness of each systems. whether the thickness of files used in endodontic therapy has any effect on the measuring systems was also evaluated in an effort to simplify the treatment planning phase of endodontic treatment. 29 canals of 29 sound premolars were measured with #15, #20, #25 files by 3 different dentists each using the periapical radiography. Digora/sup (R)/ and Root ZX/sup (R)/. The measurements were then compared with the true length. The results were as follows: 1. In comparing mean discrepancies between measurements obtained by using periapical radiography(mean error: -0.449±0.444 mm), Digora/sup (R)/(mean error: -0.417±0.415 mm) and Root ZX/sup (R)/(mean error: 0.123±0.458 mm) with true length. periapical radiography and Digora/sup (R)/ system had statistically significant differences(p<0.05) in most cases while Root ZX/sup (R)/ showed none(p>0.05). 2. By subtracting values obtained by using periapical radiography, Digora/sup (R)/ and Root ZX/sup (R)/ from the true length and making a distribution table of their absolute values. the following analysis was possible. In the case of periapical film. 140 out of 261<53.6％) were clinically acceptable satisfying the margin of error of less than 0.5 mm. 151 out of 261 (53,6％) were acceptable in the Digora/sup (R)/ system while Root ZX/sup (R)/ had 197 out of 261(75.5％) within the limits of 0.5mm margin of error. 3. In determining whether the thickness of files has any effect on measuring methoths, no statistically significant differences were found(p>0.05). 4. In comparing data obtained from these methods in order to evaluate the difference among measuring methods, there was no statistically significant difference between periapical radiography and Digora/sup (R)/ system(p>0.05), but there was statistically significant difference between Root ZX/sup (R)/ and periapical radiography(p<0.05). Also there was statistically significant difference between Root ZX/sup (R)/ and Digora/sup (R)/ system(p<0.05). In conclusion, Root ZX/sup (R)/ was more accurate when compared with the Digora/sup (R)/ system and periapical radiography and seems to be more effective clinically in determining root canal length. But Root ZX/sup (R)/ has its limits in determining root morphology and number of roots and its accuracy becomes questionable when apical foramen is open due to unknown reasons. Therefore the combined use of Root ZX/sup (R)/ and the periapical radiography are mandatory. Digora/sup (R)/ system seems to be more effective when periapical radiographs are needed in a short period of time because of its short processing time and less exposure.

• 한국초지조사료학회지
• /
• 제9권3호
• /
• pp.135-140
• /
• 1989

This experiment was to study the relationship between shoot and root system in perennial ryegrass at different stages of growth. The results are summarized as follows; 1. The dry weight of shoot was significantly correlated with the dry weight of root at both stages of growth. 2. The yield components of shoot and root systems were changed by the stages of growth. Thus, the dry weights of shoot and root were positive correlated with the number of tillers and roots at 60 days after sowing. But, the dry weights of shoot and root were positive correlated with the dry weight of root, the dry weight of tiller, length of plant and length of root at 90 days after sowing. 3. Maprirna variety was obtained a higher dry weights of shoot and root at 60 days after sowing, but, Alta variety was obtained at 90 days after sowing, respectively. 4. The dry weight of shoot was positive correlated with leaf area at both stages of growth. 5. The dry weight of shoot was significantly negative correlated with specific leaf weight at 60 days after sowing, but positive correlated with specific leaf weight at 90 days afikr sowing. 6. The dry weight of root was smcantly positive correlated with leaf area at 60 days after sowing, but not recognized at 90 days after sowing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1371-1374
• /
• 2004

The control system design of 2-DOF for SISO process by root locus technique is not complicated and efficiently. It can design the control system to have the transient and steady state responses, and do not adjust the gain of process controller later. However, due to control system design for MIMO process, by root locus technique, there is not exact method. This paper is presents the control system design method for Quadruple-Tank Process, by using root locus technique for the structure of 2-DOF control system. The design procedures are first decentralized then using the relative gain array, and finally 2-DOF controller design is applied.