• Research in Plant Disease
• /
• v.11 no.2
• /
• pp.193-197
• /
• 2005

The effect of pH on the survival of R. solanacearum and its transmission via roots of tomato in hydroponic culture were studied in laboratory and greenhouse. In laboratory experiment, R. solanacearum could not survive for 24h in nutrient solution with pH of $4{\cdot}0;or\;4{\cdot}5$, while 1, 14, 51 and $62\%$ of inoculum survived at pH $5{\cdot}0,\;5{\cdot}6\;and\;6{\cdot}5$, respectively. When tomato plants were inoculated with R. solanacearum through wounds on the stems, the bacteria moved downward from the inoculation site to the roots and infectious bacteria were released from the roots into the nutrient solution. Of two pH regimes tested in greenhouse nutrient-film technique(NFT) culture, the R. solanacearum population was significantly lower in pH 5.0 than in pH 6.5 in most sampling data. In treatments in which R. solanacearum was introduced by transplanting two root-inoculated plants, significantly move plants developed wilt at pH $6{\cdot}5$(34 out of 48 plants) than at pH 5.0(11 out of 48 plants). In addition, when the bacterium was introduced by transplanting two stem-inoculated plants at pH $6{\cdot}5$, seven out of 24 plants developed wilt.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.291-295
• /
• 2007

강수진단모형을 이용하여 저수지 이수운영을 위한 실시간 유량예측기법을 개발하였다. 강수진단모형은 현재 기상청 현업에서 수행중인 강우수치예보를 기반으로 상세 지역의 지형 효과에 의한 강수를 예측하는 정량강수예측모형(QPM; Quantitative Precipitation Model)으로서 부경대학교 환경대기과학과에서 개발된 모형이다. QPM은 중규모 예측 모형으로부터 계산된 수평 바람, 고도, 기온, 강우 강도, 그리고 상대습도 등의 예측 자료를 이용하고, 소규모 상세지형 효과를 고려함으로써 중규모 예측 모형에서 생산된 강수량 예측 값을 상세 지역의 지형을 고려한 강수량 예측 값으로 재구성하여 결과적으로 3km 간격의 상세지역 강우산출과 지형에 따른 강수량의 분포 파악이 용이할 뿐만 아니라 계산 효율성을 개선된 모형이다. QPM 검증을 위하여 기상학적 평가와 수문학적 평가를 수행하였다. 호우 사례별 일강수량의 시공간 분포로 부터, QPM을 활용한 시스템에 의한 예측결과가 원시자료 RDAPS 보다 고해상도의 예측 및 지형효과의 반영도가 높았으며, AWS의 관측자료와 비교하여 보다 높은 예측성을 보여 주었다. 대상기간인 2006년 1월 1일부터 6월 20일까지 관측강우는 총 391.5mm 였으며 RQPM은 실적강우에 비하여 119.5mm 정도 과소산정하고 있으나 분위사상과정을 거치게 되면 351.7mm로서 실적강우에 불과 10.2% 못미치고 있다. 이는 고무적인 결과로 볼 수 있으며 현업에서의 활용성이 기대되는 수준이라 볼 수 있다. 강우-유출모의를 위한 QPM신뢰도를 높이기 위하여 분위사상법(Quantile Mapping)을 이용하여 QPM모의에 존재할 수 있는 계통오차에 대한 추가적인 보정을 수행하였다. 수문학적 평가를 위하여는 장기연속유출모형인 SSARR모형을 기반으로 개발된 RRFS(Rainfall-Runoff Forecast System)을 이용하여 2006년 1월${\sim}$9월까지의 용담댐 유입량에 대하여 모의예측결과와 관측유입량 비교를 통한 검증을 수행하였다. 위 기간중 예측유입량의 RMSE(Root Mean Squared Error), COE(Sutcliffe Coefficient of Efficiency), MAE(Mean Absolute Error), $R^2$값은 각각 7.50, 0.68, 2.59, 0.69 값을 보이고 있다. 본 연구에서는 QPM에 의한 예측성의 향상 및 구축된 시스템에 의한 일강수량의 장기예측 가능성을 확인하였고, 향후 시스템을 현업에 활용하기 위해서 생산된 예측자료의 보다 장기적인 검증을 통한 시스템의 안정화가 필요할 것으로 사료된다.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.1
• /
• pp.49-55
• /
• 1997

This study was conducted to establish mass propagation system from the tissue culture using immature embryos in Eleutherococcus senticosus. Immature embryos from seeds were removed under the microscope and placed on MS, $MSB_5\;and\;B_5$ medium containing several plant growth regulators. While the calli were well formed on media containing 2 mg/l of 2, 4-D, 2 mg/l of 2, 4-D and 0.7 mg/l of TDZ, shoot regeneration was better on MS medium with combinations of high concentrations of TDZ and low concentrations of 2, 4-D. Treatment of 2, 4-D alone was better than treatment of TDZ alone in callus induction, but plant regeneration was reversed. The results of callus formation and shoot regeneration on $MSB_5\;and\;B_5$ media were similar to those of MS media. The rate of callus formation was nearly 100% when 2, 4-D was added to $B_5$, medium on concentration of 2 mg/l or 0.7 mg/l. TDZ showed very significant effect on the formation of multiple shoots.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2018

To determine the position of receiver, the GPS (Global Positioning System) uses position information of satellites and pseudo ranges based on signals. These are reflected by surrounding structures and multipath errors occur. This paper proposes a method for multipath error reduction using digital images to enhance the accuracy. The goal of the study is to calculate the shielding environment of receiver using image processing and apply it to GPS positioning. The proposed method, firstly, performs a preprocessing to reduce the effect of noise on images. Next, it uses hough transform to detect the outline of building roofs and determines mask angles and permissible azimuth range. Then, it classifies the satellites according to the condition using the image processing results. Finally, base on point positioning, it computes the receiver position by applying a weight model that assigns different weights to the classified satellites. We confirmed that the RMSE (Root Mean Square Error) was reduced by 2.29m in the horizontal direction and by 15.62m in the vertical direction. This paper showed the potential for the hybrid of GPS positioning and image processing technology.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.314-322
• /
• 2017

Purpose: This study was conducted to investigate the hot air drying characteristics of squash slices depending on the drying conditions (input air velocity, input air temperature, and sample thickness). Methods: The developed drying system was equipped with a controllable air blower and electric finned heater, drying chamber, and ventilation fan. Squash (summer squash called Korean zucchini) samples were cut into slices of two different thicknesses (5 and 10 mm). These were then dried at two different input air temperatures (60 and $70^{\circ}C$) and air velocities (5 and 7 m/s). Six well-known drying models were tested to describe the experimental drying data. A non-linear regression analysis was applied to determine model constants and statistical indices such as the coefficient of determination ($R^2$), reduced chi-square (${\chi}^2$), and root mean square error (RMSE). In addition, the effective moisture diffusivity ($D_{eff}$) was estimated based on the curve of ln(MR) versus drying time. Results: The results clearly showed that drying time decreased with an increase in input air temperature. Slice thickness also affected the drying time. Air velocity had a greater influence on drying time at $70^{\circ}C$ than at $60^{\circ}C$ for both thicknesses. All drying models accurately described the drying curve of squash slices regardless of slice thickness and drying conditions; the Modified Henderson and Pabis model had the best performance with the highest R2 and the lowest RMSE values. The effective moisture diffusivity ($D_{eff}$) changes, obtained from Fick's diffusion method, were between $1.67{\times}10^{-10}$ and $7.01{\times}10^{-10}m^2/s$. The moisture diffusivity was increased with an increase in input air temperature, velocity, and thickness. Conclusions: The drying time of squash slices varied depending on input temperature, velocity, and thickness of slices. The further study is necessary to figure out optimal drying condition for squash slices with retaining its original quality.

• Journal of Korean Physical Therapy Science
• /
• v.12 no.3
• /
• pp.47-58
• /
• 2005

The purpose of this study is to estimate how much the motility of affected and unaffected lower limb respectively would have effects on their ambulation through comparing the difference between their affected and unaffected lower limb and studying the correlation between such difference and their ambulation. In addition, the study also intends to find out remedial measures suitable for improving their ambulation with relevant physical treatment. To do this, a quantitative electromyogram(QEMG) test was done to both quadriceps and hamstring of affected and unaffected lower limb so as to yield IP values. Based on such IP values, RMS(root mean square) values as the total sum of IP values were found with QEMG analysis system (made by Medelec Co.) and then the ambulation depending on the difference in muscular strength were analyzed by ink-foot print method as well as the corresponding statistics were processed by T-test through SPSS. The effect of differences in muscular strength of quadriceps in affected and unaffected limb of hemiplegic patients on their ambulation was also different in each element of ambulation. However, there was not any statistically significant difference (p>.05). The differences in muscular strength of hamstring in unaffected limbs of hemiplegic patients only affect stride length. It was statistically significant. The effect of difference in muscular strength of the hamstring in affected limb of hemiplegic patients on their ambulation was very different between strong and weak group in terms of walking velocity, step per minute, stride and step length, showing statistically significant difference(p<.05). Although there was a difference in the step length of the affected limb, it was not statistically significant(p>.05). For the unaffected hamstring, there were significant differences of stride length between in unaffected limb and in affected limb. For the affected hamstring, there were also significant differences in walking velocity, step per minute, stride and step length. Besides, it was found that the difference of the muscular strength between strong and weak group was at the highest. Thus, the effect of difference in muscular strength on ambulatory factors such as walking velocity, step per minute, stride and step length did not show any statistical significance but differences in affected and unaffected quadriceps. However, it was found that both the difference of stride in unaffected hamstring and the difference of all ambulatory factors except from step length with affected limb had effects on ambulation depending upon muscular strength.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.685-690
• /
• 2010

Rubiadin, a major compound of noni ($Morinda$ $citrifolia$) adventitious root, is highly valued in pharmaceutical industry due to hepatoprotective activity. To dissect rubiadin's effective extraction condition, extraction process of noni adventitious roots was performed with different solvent types, ratio of water to methanol (water, 20, 40, 60, 80, and 100% of methanol), extraction time, and extraction method. In contrast, we also developed a reverse- phase HPLC assay method to determine rubiadin from noni adventitious roots. The HPLC assay of rubiadin was performed by C-18 column using a gradient solvent system of methanol and water with UV detector at 280 nm. The extraction efficiency of different types of solvents were increased in order of methanol (0.08%) > ethanol (0.05%) > acetonitrile (0.03%) > acetone (0.02%) and methylene chloride (0.02%). The results of rubiadin extraction using different solvents showed that 1 hour of ultrasonic extraction was effective in order of 60% methanol (0.21%) > 80% methanol (0.13%) > 100% methanol (0.07%), 40% methanol (0.07%) and 2 hours of reflux extraction was effective in order of 60% methanol (0.21%) > 40% methanol (0.17%) > 80% methanol (0.14%). To compare the extraction efficiency of rubiadin according to the extraction methods and time for high rubiadin content, the extracts of rubiadin in noni adventitious roots were isolated with the methods of ultrasonic extraction, shaking extraction and reflux extraction. Rubiadin extracted from the methods of ultrasonic waves and shaking displayed the highest contents at 8 and 24 hours, respectively.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.701-709
• /
• 1998

Many dental composites are Bis-GMA based resin which diluted with the more fluid monomer triethylenglycol dimethacrylate(TEGDMA). TEGDMA is often present in exess so that some quantity remains unreacted following photo-initiated polymerization. TEGDMA is a component of some resin composites which contributes to their cytotoxicity. The presence of dentin between resin composite and pulp space reduce the cytotoxicity in vitro. The root system from extrcted human third molar was removed and then a circular occlusal cavity 4mm in diameter was prepared, leaving a remaining dentinal thickness to the roof of the pulpal chamber within the range 1.0-1.5mm. Dentine was treated with 37% phosphoric acid prior to Z 100 placement without using bonding resin(group 1). In group 2, SMP(Scotchbond Multi Purpose) primer, bonding resin prior to Z 100 placement were applied sequently. In group 3, moulds with internal dimensions 4mm diameter by 2mm depth were used to contain the composite alone with an equvalent mass on tooth model, and then they were immersed directly into water. The purpose of this study is to evaluate the release rate and quantity of TEGDMA with or without the application of bonding resin. Both release rate and total cumulative amount of TEGDMA for the three groups were determined using reversed-phase HPLC at times up to 10 days. The results were as follows: 1. All experimental groups showed the highest rate of release was in the first sample period(0-4.32 min) and the rate of release declined exponentially thereafter. 2. The maximum release rate and total cumulative account of TEGDMA in the tooth model of group 1 and group 2 with the use of SMP bonding resin were reduced however ther were no significant differences between these groups(P>0.05). 3. In the first sample period(0-4.32 min), the rate of release of TEGDMA from composite resin in group 3 immersed directly into water was significantly higher than that in group 1 and group 2 of tooth model(P<0.05). Conclusively, TEGDMA diffusion from Z 100 resin was not effectively prevented by the presence of dentin in spite of using the SMP bonding resin.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.204-210
• /
• 1998

This paper presents the development of the probability density function applicable for wave heights (peak-to-trough excursions) in finite water depth including shallow water depth. The probability distribution applicable to wave heights of a non-Gaussian random process is derived based on the concept of the maximum entropy method. When wave heights are limited by breaking wave heights (or water depth) and only first and second moments of wave heights are given, the probability density function developed is closed form and expressed in terms of wave parameters such as $H_m$(mean wave height), $H_{rms}$(root-mean-square wave height), $H_b$(breaking wave height). When higher than third moment of wave heights are given, it is necessary to solve the system of nonlinear integral equations numerically using Newton-Raphson method to obtain the parameters of probability density function which is maximizing the entropy function. The probability density function thusly derived agrees very well with the histogram of wave heights in finite water depth obtained during storm. The probability density function of wave heights developed using maximum entropy method appears to be useful in estimating extreme values and statistical properties of wave heights for the design of coastal structures.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.5
• /
• pp.53-67
• /
• 2011

The major objective of this study was to quantify the effects of substrate depth and substrate composition on the development of sedum etc., in a sloped rooftop (6 : 12 pitch) environment during a 4-year period. The experiment was conducted from 2006 October to 2010 December under several conditions without soil erosion control : two substrate depth (5cm, 10cm), four substrate composition (A5N3C2, A3N3C4, A6C4, G5L3C2: A: artificial lightweight soil, N : natural soil, G : granite decomposed soil, C : leave composite, L : loess), four sloped roof direction ($E40^{\circ}W$, $W40^{\circ}N$, $S40^{\circ}W$, $N40^{\circ}E$). In this experiment 4 sedum etc., were used: Sedum sarmentosum, Sedum kamtschaticum, Sedum rupestre, Sedum telephium, flowering herbs (mixed seed : Taraxacum platycarpum, Lotus corniculatus, Aster yomena, Aster koraiensis), western grasses (mixed seed : Tall fescue, Creeping redfescue, Bermuda grass, Perennial ryegrass). The establishment factor had two levels : succulent shoot establishment (sedum), seeding (flowering herbs, western grasses). 1. Enkamat, as it bring about top soil exfoliation, was unsuitable material for soil erosion control. 2. Sedum species exhibited greater growth at a substrate depth of 10cm relative to 5cm. All flowering herbs and western grasses established only at a substrate depth of 5cm were died. A substrate depth of 5cm was not suited in sloped rooftop greening without maintenance. If additional soil erosion control will be supplemented, a substrate depth of 10cm in sloped rooftop greening without maintenance was considered suitable. 3. For all substrate depth and composition, the most abundant species was Sedum kamtschaticum. The percentage of surviving Sedum kamtschaticum was 73.4% at a substrate depth of 10cm in autumn 2007 one year after the roof vegetation had been established. But the percentage of surviving other sedum were 33.3%~51.9%, therefor mulching for soil erosion control was essential after rooftop establishment in extensive sloped roof greening was proved. To raise the ratio of plant survival, complete establishment of plant root at substrate was considered essential before rooftop establishment. 4. There was a significant interaction between biomass and substrate moisture content. There were also a significant difference of substrate moisture and erosion among substrate composition. The moisture content of A6C4 was highest, the resistance to erosion of A5N3C2 was highest among substrate composition. The biomass of plants were not significantly higher in A5N3C2 and A6C4 relative to A3N3C4 and G5L3C2, For substrate moisture and erosion resistance, A5N3C2 and A6C4 were considered suitable in sloped rooftop greening without maintenance. 5. There were significant difference among roof slope direction on the substrate moisture. Especially, the substrate moisture content of $S40^{\circ}W$ was lower relative to that of $N40^{\circ}E$, that guessed by solar radiation and erosion.