• Clean Technology
• /
• v.20 no.3
• /
• pp.283-289
• /
• 2014

General household vacuum cleaners consist of dust collector, pre filter, motor and exhaust filter, and the filtered clean air is discharged to the atmosphere. By using the CFD methods, we estimated the internal flow in two types of commercial cyclone vacuum cleaners to evaluate the dust collection performance. From the analysis, it was known that the number of revolution had higher values in cyclone cone region. CFD analysis in a specific showed non-uniform velocity distribution at outlet, which results in the deterioration of particle collection performance. In order to improve flow condition, the installation of baffle was proposed and the values of velocity RMS were estimated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.356-367
• /
• 2019

This study evaluates the variation characteristics of irregular wave fields for two-dimensional Low-Crested Structure (LCS) by olaFlow model based on the two-phases flow by numerical analysis. The numerical results of olaFlow model are verified by comparing irregular wave profile of target wave spectrum and measured one, and their spectra. In addition, spacial variation of irregular wave spectrum, wave transmission ratio, root-mean square wave height, time-averaged velocity and time-averaged turbulent kinetic energy by two-dimensional LCS are discussed numerically. The time-averaged velocity, one of the most important numerical results is formed counterclockwise circulating cell and clockwise nearshore current on the front of LCS, and strong uni-directional flow directing onshore side around still water level.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.17-24
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of a combination of isotonic (CI) technique on the balance, muscle fatigue and muscle activities of the quadriceps muscle in the paretic leg of hemiplegic patients. Method: All the subjects received a combined isotonic technique of proprioceptive neuromuscular facilitation (PNF) for about 30 minutes 3 times per week for 6 weeks. The root mean square (RMS) and mid frequency (MF) were recorded by surface electromyography (EMG)(EMG/EP system, OXFORD Medelec, UK) during maximal voluntary isometric contractions (MVIC). The balance ability was measured by a balance system (BIODEX, USA). Result: The RMS of the quadriceps muscle at post-treatment was significantly increased compared to that at pretreatment (p<0.05). Yet there was no significant difference among the three muscles. There were no significant difference in the MF of the vastus lateralis and rectus femoris between pre- and post-treatment, but the MF of the vastus medialis was significantly decreased (p<0.05). There was a significant difference in the vastus medialis and lateralis between pre- and post-treatment (p<0.05). Moreover, the overall stability index at post-treatment was significantly decreased compared to that at pre-treatment (p<0.05). But there was no significant difference between the anterior/posterior and medial/lateral stability indexes. Conclusion: The results of this study indicated that a CI technique of PNF had an effect to improve the balance and muscle activity in hemiplegic patients.

• Journal of The Korean Astronomical Society
• /
• v.50 no.6
• /
• pp.191-200
• /
• 2017

We analyze the time data recorded in Korean astronomical almanacs for the years from 1913 to 1945, which belong to the period in which Japan occupied Korea (1910-1945). These almanacs, published by Japanese scholars, differ from previous almanacs in terms of organization, content, and calendrical methods. In this study, we first extract twelve kinds of time data from the almanacs at the following times: solar terms, rising and setting of the Sun and Moon, transit of the Sun, phases of the Moon (i.e., new Moon, first quarter Moon, full Moon, and last quarter Moon), and eclipses of the Sun and Moon. Then, we compare the time data with that obtained from modern calculations. Even though all time data in the almanacs are tabulated in units of minutes, we calculate the data in units of seconds and determine the root mean square (RMS) deviation values for each kind of time data to estimate the accuracy of the data. Our findings are as follows: First, the kind and tabulation method of time data changes several times. For instance, solar transit time is listed only for six years from 1937 to 1942. Second, the times of two equinoxes and those of a new Moon are considerably close to midnight. Third, there are some typographical errors in the almanacs, particularly in the times of moonrise and moonset. Fourth, the contact times for lunar eclipses represent the times of the umbra and not of the penumbra, which is different from the times for solar eclipses. Finally, the RMS deviation values are approximately 0.5 min on average in all kinds of time data, even though they show slightly large differences in the times related to the Moon. In conclusion, we believe that this study is useful for investigating the time data in the almanacs of other East Asian countries that were published during the same period, such as China, Japan, and Manchuria.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.32-42
• /
• 2007

The substrate resistance is modeled to estimate the performance degradation of analog circuits by substrate noise in a $0.35{\mu}m$ twin-well non-epitaxial CMOS process. The substrate resistance model equations are applied to the P+ guard-ring isolation structure and a good match was achieved between measurements and models. The substrate resistance is divided into four types and a semi-empirical model equation is obtained for each type of substrate resistance. The rms(root-mean-square) error of the substrate resistance model is below 10% compared with the measured resistance. To apply this substrate resistance model to the P+ guard ring structure, ADS(Advanced Design System) circuit simulation results are compared with the measurement results using Network Analyzer, and relatively good agreements are obtained between measurements and simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1370-1376
• /
• 2012

This paper proposes a gender recognition algorithm which classifies a male or female speaker. In this paper, characteristic vectors for the male and female speaker are analyzed, and recognition experiments for the proposed gender recognition by a neural network are performed using these characteristic vectors for the male and female. Input characteristic vectors of the proposed neural network are 10 LPC (Linear Predictive Coding) cepstrum coefficients, 12 LPC cepstrum coefficients, 12 FFT (Fast Fourier Transform) cepstrum coefficients and 1 RMS (Root Mean Square), and 12 LPC cepstrum coefficients and 8 FFT spectrum. The proposed neural network trained by 20-20-2 network are especially used in this experiment, using 12 LPC cepstrum coefficients and 8 FFT spectrum. From the experiment results, the average recognition rates obtained by the gender recognition algorithm is 99.8% for the male speaker and 96.5% for the female speaker.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.274-280
• /
• 1986

Velocity variability of Masan Inlet in the northernpart of Chinhae Bay is studied on the basis of the cross-sectional net velocity distributions and its root-mean-square. They were calculated during three consecutive cycles at spring tide as well as two cycles at near tide with precipitations in June and July 1985. During the spring tide, net ebb flow take place in the western channel while net flood flow in the eastern channel of the cross-section. On the contrary, the direction of both net flows during the neap tide with precipitations is reversed. R.M.S. isotachs show that the highest velocity is 15 cm/sec at spring tide and 10.3 cm/sec at neap tide, and the greatest velocity is persistently found at the surface layer of the western channel of the cross-section at each tidal cycle. It is shown that the major part of constituents of the constant flow in the Inlet is the tidal residual current. The density-driven current, however, plays an important role afer the heavy precipitations.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.341-345
• /
• 2000

We investigated the microstructures and the electrical properties of $ZrO_2$thin films deposited by reactive DC magnetron sputtering on (100) Si with different deposition conditions and annealing treatments. The refractive index of the $ZrO_2$ thin films increased with annealing temperatures and deposition powers, and approached to the ideal value of 2.0~2.2. The $ZrO_2$thin films deposited at the room temperature are amorphous, and the films are polycrystalline at the deposition temperature of $300^{\circ}C$. Both the thickness of the interfacial oxide layer and the root-mean-square (RMS) value of surface roughness increased upon annealing in the oxygen ambient. The Cmax value and leakage current value decreased with the increase of thickness of the interfacial oxide thickness.

• Physical Therapy Korea
• /
• v.15 no.1
• /
• pp.46-53
• /
• 2008

The aim of the present study was to determine the effect of proprioceptive neuromuscular facilitation (PNF) leg patterns on the muscle activation of neck flexors. Twenty healthy subjects participated in this study. Each subject performed bilateral asymmetrical PNF leg patterns against manual resistance under four conditions: through the full range of motion toward the right side, left side, and the end range in the right side, left side. Electromyographic (EMG) data was collected from the sternocleidomastoid (SCM) muscles as neck flexors. The root mean square (RMS) value of the SCM was measured and normalized from maximal EMG activity of the SCM. The data were analyzed using the paired t-test and repeated analysis of variance (ANOV A) was used to compare the statistical significance. The results of this study are summarized as follows: Firstly, the RMS values of SCM were significantly higher in all four PNF leg patterns than in the resting condition (p<.05). Secondly, there was no significant difference in muscle activation according to the direction of PNF leg patterns (p>.05). Thirdly, there was no significant difference in muscle activation according to the point of range of the motion of leg patterns (p>.05). It is suggested that PNF bilateral asymmetrical leg patterns have a considerable effect on muscle activation of the SCM, regardless of the range of motion and direction of PNF bilateral asymmetrical leg patterns.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.194-198
• /
• 2013

In this paper, we studied a p-type reflector based on indium tin oxide (ITO) for vertical-type ultraviolet light-emitting diodes (UV LEDs). We investigated the reflectance properties with different deposition methods. An ITO layer with a thickness of 50 nm was deposited by two different methods, sputtering and e-beam evaporation. From the measurement of the optical reflection, we obtained 70% reflectance at a wavelength of 382 nm by means of sputtering, while only 30% reflectance resulted when using the e-beam evaporation method. Also, the light output power of a $1mm{\times}1mm$ vertical chip created with the sputtering method recorded a twofold increase over a chip created with e-beam evaporation method. From the measurement of the root mean square (RMS), we obtained a RMS value 1.3 nm for the ITO layer using the sputtering method, while this value was 5.6 nm for the ITO layer when using the e-beam evaporation method. These decreases in the reflectance and light output power when using the e-beam evaporation method are thought to stem from the rough surface morphology of the ITO layer, which leads to diffused reflection and the absorption of light. However, the turn-on voltage and operation voltage of the two samples showed identical results of 2.42 V and 3.5 V, respectively. Given these results, we conclude that the two ITO layers created by different deposition methods showed no differences in the electric properties of the ohmic contact and series resistance.