• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.

• 대한장애인치과학회지
• /
• 제13권1호
• /
• pp.43-46
• /
• 2017

본 증례는 함입 주소로 내원한 9세 4개월 뇌성마비 남환을 미다졸람 근주를 이용한 의식하 진정법으로 해당치아의 수술 적 재위치 및 근관치료를 시행하였다. 5년이 지난 현재 유착 소견 및 부분적인 치근흡수가 보이나 양호한 상태로 유지되고 있다. 뇌성마비 환자의 경우 치아 및 주위조직에 취약하며, 치료 시 적절한 행동조절 및 치료 방법을 선택하는 임상의의 노력이 필요하다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권3호
• /
• pp.271-275
• /
• 2001

Nine cases of maxillary sinus aspergillosis during a period from February of 1992 to June of 2000 were investigated to analyze the clinical, radiologic and pathologic features. Maxillary sinus aspergillosis is rare disease, but it was increasing tendency with overuse antibiotics, steroid hormones, and anticancer agents. Aspergillosis of the maxillary sinus may occur as a chronic disease in an otherwise healthy person. The clinical features of maxillary sinus aspergillosis were similar to the non-fungal, chronic sinusitis. Intrasinus calcification is known to be a characteristic feature of maxillary sinus aspergillosis. It is suggested that excess root filling materials containing zinc oxide in the maxillary sinus could favour the formation of a local, non-invasive maxillary sinus aspergillosis. And this "dental" model of pathogenensis of maxillary sinus aspergillosis is an alternative to the widely accepted concept of spore inhalation and "aero-genic" pathogenensis of maxillary sinus aspergillosis. The radical surgery such as Caldwell-Luc operation was one of the most effective treatment modalities. Our results of this study indicate that maxillary sinus aspergillosis might occur mainly in healthy individuals rather than debilitating patients. It could efficiently treated with radical surgery alone without the antifungal agents. 4 cases were suspected to be related with teeth extraction and endodontic treatment. There were no recurrence in all cases.

• 한국작물학회지
• /
• 제34권3호
• /
• pp.296-302
• /
• 1989

수도의 직파재배에 있어서 가장 취약점인 출아.입묘율을 향상시키는데 많은 영향을 미치는 중배축 신장에 대하여 검토하였던 바 그 결과를 요약하면 다음과 같다. 1. 품종의 기원별 중배축장은 다수형 품종이 9.6mm로 재래종과 일본형 각각 4.4, 3.2mm 보다도 훨씬 컸다. 2. 생태형별 중배축 신장은 tjereh, aman, aus, boro 및 bulu 순으로 tjereh가 29.3mm로 buld의 5.4mm에 비해 약 5배나 컸다. 3. 품종간 중배축장은 재래종에서 백경조, 다다조 및 해조가, 일본형은 상풍벼, 팔달 및 간량도가, 다수형 품종에서는 원풍벼, 가야벼, 밀양30호 및 수정벼가 컸다. 4. 종자 숙도별 중배축장은 개화 1주후 채종 종자가 39.3mm로 가장 컸고, 성숙일수가 길어짐에 따라 중배축장은 점차 작아졌다. 5. 종자 저장기간이 길어질수록 종자숙도와 관계없이 중배축장은 점차 감소하는 경향이었고, 저장온도 5$^{\circ}C$구가 15$^{\circ}C$, $25^{\circ}C$에 비하여 중배축장의 감소정도가 작았다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.265-269
• /
• 2014

Objectives: To evaluate the effect of different ultrasonic tip designs on intraradicular post removal. Materials and Methods: The crowns of forty human canine teeth were removed, and after biomechanical preparation and filling, the roots were embedded in acrylic resin blocks. The post spaces were made, and root canal molding was performed with self-cured acrylic resin. After casting (Cu-Al), the posts were cemented with zinc phosphate cement. The specimens were randomly separated into 4 groups (n = 10), as follows: G1 - no ultrasonic vibration (control); G2 - ultrasonic vibration using an elongated cylindrical-shaped and active rounded tip; G3 - ultrasonic vibration with a flattened convex and linear active tip; G4 - ultrasonic vibration with active semicircular tapered tip. Ultrasonic vibration was applied for 15 seconds on each post surface and tensile test was performed in a Universal Testing Machine (Instron 4444 - 1 mm/min). Results: G4 presented the highest mean values, however, with no statistically significant difference in comparison to G3 (p > 0.05). G2 presented the lowest mean values with statistically significant difference to G3 and G4 (p < 0.05). Conclusions: Ultrasonic vibration with elongated cylindrical-shaped and active rounded tip was most effective in reducing force required for intraradicular post removal.

• Restorative Dentistry and Endodontics
• /
• 제47권3호
• /
• pp.34.1-34.12
• /
• 2022

Objectives: This study aimed to evaluate the success rate of endodontic treatments performed by undergraduate students and the factors associated with the outcome. Materials and Methods: A follow-up of 3 to 8 years after root canal filling was carried out in 91 patients. At the follow-up visits, medical and dental history questionnaires were applied along with clinical and radiographic examinations. Data collected in the clinical exam included: the presence of pain, swelling, sinus tract, mobility, tenderness to palpation and percussion, periodontal probing profile, and type/quality of coronal restoration. Postoperative and follow-up radiographs were digitalized and analyzed by 2 trained and calibrated examiners to assess periapical healing. The treatment outcome was based on strict clinical and radiographic criteria and classified as success (absence of any clinical and radiographic sign of apical periodontitis) or failure (other combination). Logistic regression was used to investigate the impact of clinical and radiographic variables on endodontic treatment outcomes at a 5% significance level. Results: The success rate of endodontic treatments was 60.7%. The only risk factor significantly associated with failure was the presence of a periapical lesion on the postoperative radiograph (odds ratio, 3.35; 95% confidence interval, 1.17-9.54). Conclusions: The success rate of endodontic treatments performed by undergraduate students was low and was jeopardized by the presence of a periapical lesion on the postoperative radiograph.

• 대기
• /
• 제33권5호
• /
• pp.441-456
• /
• 2023

The mobile observation method, in which a meteorological drone observes while ascending, can observe the vertical profile of wind at 1 m-interval. In addition, since continuous flights are possible at time intervals of less than 30 minutes, high-resolution observation data can be obtained both spatially and temporally. In this study, we verify the accuracy of mobile observation data from meteorological drone (drone) and fill the spatio-temporal observation gaps in the lower atmosphere. To verify the accuracy of mobile observation data observed by drone, it was compared with rawinsonde observation data. The correlation coefficients between two equipment for a wind speed and direction were 0.89 and 0.91, and the root mean square errors were 0.7 m s^-1 and 20.93°. Therefore, it was judged that the drone was suitable for observing vertical profile of the wind using mobile observation method. In addition, we attempted to resolve the observation gaps in the lower atmosphere. First, the vertical observation gaps of the wind profiler between the ground and the 150 m altitude could be resolved by wind observation data using the drone. Secondly, the temporal observation gaps between 3-hour interval in the rawinsonde was resolved through a drone observation case conducted in Taean-gun, Chungcheongnam-do on October 13, 2022. In this case, the drone mobile observation data every 30-minute intervals could observe the low-level jet more detail than the rawinsonde observation data. These results show that the mobile observation data of the drone can be used to fill the spatio-temporal observation gaps in the lower atmosphere.

• Restorative Dentistry and Endodontics
• /
• 제33권1호
• /
• pp.66-75
• /
• 2008

본 연구에서는 근관형성의 치근단 크기가 근관 충전의 치근단 폐쇄에 미치는 영향에 대해 알아보고자 하였다. 36개의 단근관, 단근치를 대상으로 3가지 치근단 크기 (Master apical file : #25, #40, #60)에 따라 3가지 실험군으로 나누어 $Profile^{(R)}$과 $LightSpeed^{(R)}$를 이용하여 근관을 확대하고, Modified continuous wave technique으로 근관충전을 시행하였다. 미세누출의 측정을 위해 실험군당 10개의 치아를 1주일간 India ink에 넣어 색소 침투를 일으키고 치아를 투명화시켜 미세누출의 정도를 측정하였다. 미세누출에 치근단 크기가 미치는 영향을 분석하기 위하여 Kruskal-Wallis one-way ANOVA를 시행하였고, 사후 검정을 위하여 Student-Newman-Keuls method를 시행하였다. 또한, 치아 단면의 형태를 관찰하기 위하여 색소 침투까지 실행된 각 실험군당 2개의 치아를 근첨 1 mm에서 4 mm까지 1 mm간격으로 수평 절단하고 사진 촬영하였다. 각 실험군에서 측정된 미세누출양을 Krustal-Wallis one-way ANOVA에서 분석한 결과 치근단 크기는 유의성 있게 (P < 0.05) 미세누출에 영향을 미쳤으며 치근단 크기가 클수록 미세누출의 평균간과 표준편차 값은 감소하는 경향을 보였다. Student-Newman-Keuls method를 통한 사후 검정에서 치근단 크기가 #25 - #40, #25 - #60에서 유의 한 차이를 보였으며 #40 - #60간에는 통계적인 유의차는 없었다. 단면형태에서는 대부분의 치아에서 난원형의 근관 형태를 관찰 할 수 있었고, 치근단의 크기가 작을수록 성형된 근관에 불규칙한 내면이 존재하였고 gutta-percha나 sealer로 충전되지 않는 recess의 면적이 증가함을 알 수 있었으며 이러한 recess는 미세누출의 통로가 됨을 확인 할 수 있었다. 본 연구 결과, Modified continuous wave technique으로 근관충전시 근관 형성된 치근단 크기가 커질수록 보다 일관되고 성공적 인 결과를 예상할 수 있는 근관충전을 시행할 수 있음을 알 수 있었다.

• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.31-39
• /
• 2009

목적 : 본 연구는 PRF(Proton Resonance Frequency)를 이용한 MR 온도감시 영상에서 시간 해상도를 keyhole방법 적용으로 향상시키고자하였다. 제시된 keyhole방법과 기존 온도영상 방법 사이의 비교를 위해 온도 값에 대한 RMS(Root Mean Square) 오차와 SNR(Signal to Noise Ratio)을 비교하였다. 대상 및 방법 : PRF 방법과 GRE(Gradient Recalled Echo)를 이용하여 MR 온도영상을 구현하였으며 장비로는 임상용 1.5T MRI 장치를 이용하였다. 인체모사 조직인 2% 한천 젤 팬텀과 돼지 근육조직으로 실험을 수행하였다. 2.45GHz대역의 마이크로파 발생장치로 MR호환 동축 슬롯 안테나를 구동하여 MRI장치 내에서 대상 조직과 팬텀을 5분간 가열하였다. 가열 직후 10분 동안에 순차적으로 MR 원 데이터를 획득하였다. 획득된 원 데이터는 PC로 전송되어 전체 위상을 부호화하여 얻은 원 데이터의 바깥영역과 K-space의 중앙 영역을 각각 128, 64, 32, 16으로 위상부호화된 데이터로 keyhole영상을 재구성하였다. 256개로 전체 부호화된 자체-참조 온도영상과 RMS 오차를 비교하였으며, zero-filling 영상과 SNR비교를 하였다. 결과 : keyhole 온도 영상에서 위상부호화 수가 128, 64, 32, 16으로 줄어들수록 RMS 오차로 산출한 온도의 차이가 0.538, 0.712, 0.786, 0.845$^{\circ}C$ 만큼 증가하였으나 SNR 값은 keyhole의 위상부호화 수가 줄어도 유지되었다. 결론 : 본 연구는 고정된 매트릭스 크기에 keyhole 방법 적용을 이용하여 온도 감시에서의 시간해상도 증가와 SNR 값을 유지하는 결과를 도출하여 성공적인 적용을 보여 주었다. 본 연구를 기반으로 한 다음 연구에서는 최적화된 변수를 이용한 keyhole 방법 적용으로 최소 온도 오차의 실시간 MR 온도 감시가 가능할 것이라 예상된다.