• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.77-87
• /
• 1991

The purpose of this study were to investigate the bed climate and the physiological responses in sleep on the traditional Korean floor heating system called Ondol. Ondol has been the most widely used heating system in Korea, yet there has been a no systematic studies examined its environmental effects on human body. Experimental room was constructed to match the typical thermal environment of Ondol. (floor surface temperature; $32\~33^{\circ}C$, air temperature; $22.5{\pm}1.0^{\circ}C$, relative humidity; $64.0{\pm}4.0\%$RH, air velocity; 0.25 m/sec.) Three different combinations of bedclothes were chosen for the experiment based on the study results showing that they were the most widely used types in Korea. Type 1 was the combination of a cotton-padded mattress with a cotton-padded Korean style blanket. Type 2 was a cotton-padded mattress with a cotton-guilted Korean style blanket. Type 3 was a cotton-padded matless with a polyacryl blanket. Thermal resistance of each of these combina-tions in the bedclothes was measured using thermal manikin. Two adult female was chosen for the seven hour sleeping experiment which was known to be the average sleeping hours of Korean adult female. The bed climate was measured with the temperature under the mattress, the surface temper-ature of the mattress, and the air temperature and the relative humidity of the space between the mattress and blanket. The skin temperature, rectal temperature of the subjects and the bed climate were measured eight times, one hour before the experiment and every hour during the experiment. The weight loss and the subjective sensation were measured for the each subjects before and after the experiment. The procedure was repeated twice with two subjects and three types of bedclothes, yielding twelve combinations of results. The results were as follows; 1. With the surface temperature of $32\~33^{\circ}C$ of Ondol, air temperature was $22.5{\pm}1.0^{\circ}C$ with $64.0{\pm}4.0\%$ RH. The bed climates were $39.2{\pm}40.8^{\circ}C$ under the mattress, $35.3\~36.2^{\circ}C$ on the mattress, and $26.9\~32.0^{\circ}C$ with $56.0\~71.3\%$ RH between the mattress and the blanket. 2. Mean skim temperature during sleep was 34.2"C with local skin temperature of $34.0\~35.5^{\circ}C$. The skin temperatures of abdomen, thigh, foot were higher than the other parts of the body. 3. The skin temperature of chest, thigh, leg and back varied significantly according to the combinations of bedclothes. With the cotton-padded blanket, the skin temperature was the highest, while with the cotton-guilted blanket showed lowest. 4. Examining the relationship between the mean skin temperature and the local skin temper-ature, the chest temperature showed the highest correlation with the former. Therefore, the chest temperature can be recommended to represent the skin temperature in measuring the bed climate. 5. The subjective bed climates were $39.0\~40.4^{\circ}C$ under the mattress, $35.2\~35.9^{\circ}C$ on the mattress, $29.8\~31.6^{\circ}C$ with $56.8\~68.4\%$ RH between the mattress and blanket. In sum, from this experiment we not only obtained the reliable value of bed climates on Ondol, but also showed that the bed climates and the physiological responses were affected differently according to the materials of bed clothes.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.186-192
• /
• 1996

Retrogradation of non-waxy rice (NWR) and waxy rice (WR) cakes (45% moisture) stored at 5$^{\circ}C$, $25^{\circ}C$ and -2$0^{\circ}C$ was studied by differential scanning calorimetry (DSC) and enzymatic ($\beta$-amylase-puuulanase) method. With DSC, endotherms did not appear with rice cakes stored at room ($25^{\circ}C$) and deep freezing (-2$0^{\circ}C$) temperatures but did with samples stored at low temperature (5$^{\circ}C$), showing accelerated retrogradation by low temperature. Onset temperature (To) and peak temperature (Tp) did not change under 14 days at 5$^{\circ}C$ but enthalpy values ($\Delta$H) increased rapidly within one day and increased steadily until 5th day of storage, then equilibrated. Higher $\Delta$H were obtained with WR cakes than NWR cakes. It was suggested that more amylopectin recrystallization occured with WR than NWR. Degrees of gelatinization of rice cakes determined by enzymatic method increased in the following order: 5$^{\circ}C$ < $25^{\circ}C$ < -2$0^{\circ}C$. In contrast with DSC results, dogrees of gelatinization of NWR cakes, were relatively lower than that of WR cakes. However, increased retrogradation extents (melting enthalpies) caused reduced enzyme susceptibilities to $\beta$-amylase-pullulanase system, among NWR or WR cakes stored at 5$^{\circ}C$. The degrees of retrogradation of rice cakes stored at 5$^{\circ}C$ were higher than those stored at $25^{\circ}C$ and -2$0^{\circ}C$ without regard to the kind of rice. The higher sensitivity of the enzymatic method was obtained than that of DSC method when the degrees of retrogradation of rice cakes were determined during storage under this experiment conditions.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.916-923
• /
• 1998

To provide more information on the enteric pathogen Campylobacter jejuni in the view of food sanitation, survival characteristics of two strains of C. jejuni in the different conditions were investigated. When $10^7{\;}or{\;}10^3{\;}per{\;}ml$ of C. jejuni cells were inoculated in the supplemented Brucella broth and kept at $42^{\circ}C,{\;}25^{\circ}C{\;}and{\;}5^{\circ}C$ under the static aerobic condition for 7 days, organisms exponentially proliferated to $a{\;}>10^8$, even in the $10^3{\;}per{\;}ml$ inoculated-sample at $42^{\circ}C{\;}for{\;}1{\sim}2{\;}days$ and the considerable level of viability maintained during 7 days. At $5^{\circ}C$, most of the initial level of organisms survived at the early period and only $a{\;}<{\;}0.5-log_{10}$ cells decrease were observed during the 7 days. At $25^{\circ}C$, a remarkable number of C. jejuni declined within $1{\sim}2{\;}days$ and showed undetectable level of cells after 4 days. When sterile milk and minced chicken meat were artifically inoculated with $10^7{\;}per{\;}ml$ of C. jejuni, mostly, a $1-to{\;}2-log_{10}$ count decrease occurred at $42^{\circ}C{\;}and{\;}5^{\circ}C$ while $a{\;}>3{\;}log_{10}$ decrease at $25^{\circ}C$ during 7 days. Unexpectedly, no colonies appeared on the plate inoculated from the minced chicken meat sample kept at $42^{\circ}C$ after 4 days. The results suggest that C. jejuni contaminated to food can survive at the refrigeration temperature whereas they are sensitive to at the room temperature. Also, it is shown that the growth of C. jejuni at the optimal temperature may vary to the food sources.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2018

Tiarella polyphylla D. Don is a native plant distributed only in Ulleung Island in Korea and has been traditionally used for medicinal purposes, although it is also used ornamentally. This study was conducted to determine the requirements for dormancy break and germination and to classify the type of seed dormancy. The experiments were performed with cold stratification (0 or 12 weeks at $5^{\circ}C$), warm stratification (0, 4, 8, or 12 weeks at $23^{\circ}C$, followed by 8 weeks at $5^{\circ}C$, and then incubation at $23^{\circ}C$), and $GA_3$ treatments (0, 10, 100, or 1000 mg/L). The treated seeds were incubated on aseptic media at room chamber ($23^{\circ}C$, a 16h photoperiod of fluorescent lamps with $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The seeds were dispersed in nature as underdeveloped embryos with no physical barrier to absorb water to prevent water absorption. However, the seeds did not germinate for 30 days after sowing without any pre-treatments. Thus, the seeds had morphological dormancy (MD) and physiological dormancy (PD). The final germination percentage following cold stratification (0 or 12 weeks) was 66.7% and 45.6%, respectively. The cold stratification delayed seed germination by about 3 weeks. In the warm stratification experiment (0, 4, 8, or 12 weeks), the final germination percentage was 21.1%, 27.8%, 41.1%, and 57.8%, respectively, 20 weeks after sowing. The embryos of the T. polyphylla seed grew in relatively warm temperatures ($23^{\circ}C$). $GA_3$ application overcame seed dormancy and promoted germination. Following $GA_3$ treatment (0, 10, 100, or 1000 mg/L), the final germination percentage was 33.3%, 45.0%, 42.5%, and 72.5%, respectively. These results suggest that the T. polyphylla seeds had non-deep simple morphophysiological dormancy (MPD) and $GA_3$ treatment could be used as a substitute for warm stratification for breaking seed dormancy. To our knowledge, this is the first report of seed dormancy characteristics of the genus Tiarella native to Korea.

• Journal of Mushroom
• /
• v.17 no.3
• /
• pp.113-118
• /
• 2019

Oyster mushrooms are an economically important crop, accounting for 35% of the total mushroom production in Korea. In this study, we developed a new cultivar of Pleurotus ostreatus, known as 'Baekseon,' which is characterized by a white pileus with a white stipe. It was bred by mating monokaryons isolated from white mutant oyster mushrooms that were naturally generated from 'Gonji-7ho' and 'Wonhyeong-1ho' at the Mushroom Research Institute, GARES, Korea in 2018. The optimum temperature for mycelial growth on potato dextrose agar medium was approximately $28-31^{\circ}C$, and the optimum temperatures for primordia formation and growth of fruit bodies on sawdust media were $22^{\circ}C$ and $20^{\circ}C$, respectively. The time required for the bottle-cultured mushrooms to complete spawn running, primordia formation, and growth of fruit bodies was 30 days, 4 days, and 4 days, respectively. The fruit bodies were bundle-shaped, the pilei were round type and white, and the stipes were white. The stipes were slender and longer than those of the control ('Miso'). In the productivity test, the yield per bottle was 185 g/1100 mL, which was 45% greater than that of the control ('Miso'). In the farm test, the yield per bottle for Farm A (Pyeongtaek) and Farm B (Yeoju) was 184 g/1100 mL and 178 g/850 mL, respectively. With regard to the physical properties of fruit bodies, the springiness, cohesiveness, gumminess, and brittleness of stipe tissue were 80%, 57%, 720 g, and 57 kg, respectively. These values were lower than those of the control ('Miso'). To test the shelf life, the fruit bodies were wrapped with antifogging film and stored at $4^{\circ}C$ for 28 days and then at room temperature for 4 days; such conditions were sufficient for maintaining edibility.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.217-227
• /
• 2023

The consumption of ready-to-eat side dishes is rapidly growing in South Korea. These foods are particularly vulnerable to microbiological contamination as they are often cooked without any treatment, such as heating or stored at room temperature after cooking. Hence, in 2022, we analyzed the ready-to-eat side dishes sold in Gyeongsangnam-do, South Korea for microbiological contamination. We collected 100 samples from supermarkets in 7 cities, and then examined them for presence of food-borne pathogens and sanitary indicator bacteria. In the analysis of the food-borne pathogens, Bacillus cereus and Clostridium perfringens were isolated from 51 samples (51.0%) and 3 samples (3.0%), respectively. However, both quantitatively met the Korean Food Standards Codex. Genes of five different enterotoxins and one emetic toxin were analyzed from the 51 isolated B. cereus strains. We detected enterotoxin entFM (100.0%), nheA (94.1%), hblC (58.8%), cytK (56.9%), and bceT (41.2%) in 51 isolates, and emetic toxin gene, CER, in only one (2.0%) isolate. We did not detect C. perfringens toxin gene (cpe) that causes food poisoning in any one of the three C. perfringens isolates. In the case of sanitary indicator bacteria, Kimchi had the highest levels of total aerobic bacteria and coliforms, followed by Saengchae, Jeotgal, Jeolim, Namul, and Jorim, respectively. We counted total aerobic bacteria at two different storage temperatures (4℃ and 20℃) to determine the effect of storage temperature. When stored at 20℃, total aerobic bacteria count increased in most of the ready-to-eat side dishes, except for Jeotgal. This result conclusively shows the need for refrigerating the ready-to-eat side dishes after purchase. Further research is needed to assess the risk and safety of the ready-to-eat side dishes available in the market and determine appropriate safety management practices.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.148-156
• /
• 2023

This study was conducted in an indoor cultivation room and chamber where environmental control is possible to investigate the effect of temperature and irrigation interval on photosynthesis, growth and growth analysis of potted seedling cucumber. The light intensity (70 W·m^-2) and humidity (65%) were set to be the same. The experimental treatments were six combinations of three different temperatures, 15/10℃, 25/20℃, and 35/25℃, and two irrigation intervals, 100 mL per day (S) and 200 mL every 2 days (L). The treatments were named 15S, 15L, 25S, 25L, 35S, and 35L. Seedlings at 0.5 cm in height were planted in pots (volume:1 L) filled with sandy loam and treated for 21 days. Photosynthesis, transpiration rate and stomatal conductance at 14 days after treatment were highest in 25S. These were higher in S treatments with a shorter irrigation interval than L treatments. Total amount of irrigation water was supplied evenly at 2 L, but the soil moisture content was highest at 15S and lowest at 25S > 15L > 25L, 35S and 35L in that order. Humidity showed a similar trend at 15/10℃ (61.1%) and 25/20℃ (67.2%), but it was as high at 35/25℃ (80.5%). Cucumber growth (plant height, leaf length, leaf width, chlorophyll content, leaf area, fresh weight and dry weight) on day 21 was the highest in 25S. Growth parameters were higher in S with shorter irrigation intervals. Yellow symptom of leaf was occurred in 89.9% at 35S and 35L, where the temperature was high. Relative growth rate (RGR) and specific leaf weight (SLA) were high at 25/20℃ (25S, 25L), RGR tended to be high in the S treatment, and SLA in the L treatment. Water use efficiency (WUE) was high in the order of 25S, 25L > 15S > 15L, 35S, and 35L. As a result of the above, the growth and WUE were high at the temperature of 25/20℃.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.52-58
• /
• 2023

With the increasing awareness of the importance of carbon neutrality in response to global climate change, the utilization of hydrogen as a carbon-free fuel source is also growing. Hydrogen is commonly used in fuel cells (FC), but it can also be utilized in internal combustion engines (ICE) that are based on combustion. Particularly, ICEs that already have established infrastructure for production and supply can greatly contribute to the expansion of hydrogen energy utilization when it becomes difficult to rely solely on fuel cells or expand their infrastructure. However, a disadvantage of utilizing hydrogen through combustion is the potential generation of nitrogen oxides (NOx), which are harmful emissions formed when nitrogen in the air reacts with oxygen at high temperatures. In particular, for the EURO-7 exhaust regulation, which includes cold start operation, efforts to reduce exhaust emissions during the warm-up process are required. Therefore, in this study, the characteristics of nitrogen oxides and fuel consumption were investigated during the warm-up process of cooling water from room temperature to 88℃ using a 2-liter direct injection spark ignition (SI) engine fueled with hydrogen. One advantage of hydrogen, compared to conventional fuels like gasoline, natural gas, and liquefied petroleum gas (LPG), is its wide flammable range, which allows for sparser control of the excessive air ratio. In this study, the excessive air ratio was varied as 1.6/1.8/2.0 during the warm-up process, and the results were analyzed. The experimental results show that as the excessive air ratio becomes sparser during warm-up, the emission of nitrogen oxides per unit time decreases, and the thermal efficiency relatively increases. However, as the time required to reach the final temperature becomes longer, the cumulative emissions and fuel consumption may worsen.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.