• 한국화재소방학회논문지
• /
• 제21권1호
• /
• pp.51-59
• /
• 2007

본 연구에서는 대구에 위치한 G 지하생활공간을 대상으로 화재하중에 따른 화재성상을 분석하였다. 화재성상 예측시 화재온도나 화재지속시간을 좌우하는 인자인 화재하중 및 환기계수를 파악하기 위하여, 현장방문을 통하여 가연조건을 조사하고 실의 용도별 가연조건에 대하여 각 재료의 단위발열량을 이용하여 화재하중을 산정하였다. 또한, 산정된 실의 화재하중을 변수로 화재성상분석을 위한 6가지 모델의 축소실험을 행하고 화원의 시간에 따른 온도변화와 화원의 온도상승으로 인한 공간내부로의 열유동 분포를 중심으로 화재성상을 분석하였다.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1617-1624
• /
• 2013

논문에서는 방화셔터와 피난계단이 존재하는 실내 환경의 화재 시뮬레이션을 실시하여 방화셔터와 화재 확산 사이의 관계를 분석하였다. 화재 시뮬레이션용 상용 소프트웨어인 FDS(Fire Dynamics Simulator)를 사용하여 가상으로 설정한 실내 로비에서 화재 규모와 방화셔터의 개폐 여부를 변화시켜 가면서 모의실험을 실시하였다. 실험을 통해 화재실 벽면과 계단 입구의 온도 변화, 이산화탄소 농도 변화, 연기의 확산 등의 변수들을 구하고 결과를 검토하였다. 피난계단에서 온도와 이산화탄소의 분포는 화재규모와 개구부의 개폐 여부와 별 상관이 없으나, 방화셔터의 부분 하강이 연기의 확산을 막고 있음을 알 수 있었다.

• 한국화재소방학회논문지
• /
• 제22권4호
• /
• pp.11-19
• /
• 2008

소형선박 기관실의 자연발화 방지를 위한 적합한 환기조건을 제시하기 위하여 급, 배기구 수와 위치를 변화시키면서 나타나는 유동장과 온도장을 CFD시뮬레이션을 수행하여 분석하였다. 급, 배기구 수와 위치에 따라 유동형태가 상이하게 나타났으며, 배기구를 천장에 배치시킬 경우는 세로대칭선에 대해 좌우 측천장의 중앙에 위치하는 것이 열 제거에 더 효과적임을 알 수 있었다. 급, 배기구 수를 증가시킬 때는 배기구수를 증가시키는 것이 더 적합한 환기조건이며, 소형선박 기관실의 자연발화방지에 가장 적합한 환기조건은 급기구는 가로대칭선에 대해 전후 측 천장의 중앙에, 배기구는 양측 벽 중앙에 배치시키는 경우로 예측되었다.

• 교육시설
• /
• 제4권4호
• /
• pp.29-41
• /
• 1997

The objective of this paper is to construct a model to be used in deciding whether to repair or rebuild school buildings is depending on their ages and other factors. The theme of this paper is the age is the main variable but other factors such as floor, innerwall, ceiling, door, inner window of the class room, outer window of the class room, inner window of the corridor, outer window of the corridor, middle window between the classroom and the corridor, light, heater, speaker, fire protection sensor, TV monitor, and telephone status would influence the final decisions. This paper employs an experimental case study method. Using the stepwise, statistical, classification method commonly used in discriminant analysis, it evaluates 12,766 rooms of 87 different high schools in Seoul. The result of this study indicates that some critical variables influencing the final decisions are the status of TV monitor, middle window between the classroom and the corridor, light, inner window of the corridor, fire protection sensor, innerwall, speaker utensil, outer window of the class room, and door of the class room. This paper also suggests a linear discriminant function will be used for this kind of studies. Finally the paper recommends policies with respect to the variables and discriminant functions evaluated.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.117-127
• /
• 2015

This study investigated the smoke blocking and control systems for the safety of residents evacuation and for the prevention of smoke spread through the central corridor in the event of central corridor type of intelligent building fire. We offered additional ways of utilizing smoke ventilators and intake ventilation equipment and utilized CFD-based fire simulation program(FDS Ver.5.5.3) in order to analyze the effect. As a result, many differences in the smoke block effect, depending on the application of smoke ventilator and location of installation, was found. In addition, the result was found that larger effect was showed not in the case of application of smoke ventilator in central corridor only but application in fire room. The reason is that the smoke leakage is blocked primarily as air is flowed in the fire room through open door by operation of intake smoke ventilator in the public corridor and secondarily, the smoke leakage to the public corridor could be blocked as fire and smoke were released to the opened smoke ventilator continuously. Especially, the effect was maximized through complex interactions by applying smoke ventilator and intake ventilation equipment in corridor together rather than applying smoke ventilator and intake ventilation equipment independently. The proposed measure through this study shall be considered from architectural plan as one of ways for blocking from smoke spread to the central corridor in the central corridor type of intelligent building. In addition, flaws on regulation shall be established and supplemented.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.237-243
• /
• 2018

최근 소방설계에서 '성능위주설계'가 도입되면서 설계 단계에서부터 현장에서 화재에 의한 최소한의 피해를 목적으로 다양한 노력을 기울이고 있다. 그러나 성능위주의 설계를 위한 다양한 노력에도 불구하고 설계엔지니어들에게 제연설비의 화재안전기준에서 제시하는 법령기준이 각 설계인자의 최소 설정한계를 제시하는 가이드가 된다. 이러한 법령기준은 최소한의 기준을 제공하는 것이기 때문에 다양한 상황의 건물과 더 다양한 변수를 고려해야하는 설계 엔지니어들에게 세밀한 가이드를 제공할 수는 없기 때문에 복합적인 상황에서 어떤 인자가 화재 시 안전에 더 영향을 많이 미칠 것인지 미리 인지하고 상황에 따라 인자들을 상호 조절할 수 있는 설계정보가 필요하다 할 것이다. 본 논문에서는 대공간에서 거실급배기방식을 사용하고 제연경계에 의하여 구획이 되어 있는 경우, 배연량을 법정 배연량으로 고정한 상태에서 거실제연 설계에 가장 영향을 많이 미칠 것으로 판단되는 두 가지 인자인 제연경계의 높이와 급기량을 대상으로 미 NIST에서 제공하는 화재시뮬레이션(Fire Dynamic Simulation) 코드를 이용하여 설계인자들에 대한 합리적인 설계를 위한 정보를 제공하기 위한 연구를 수행하였다. 성능위주설계를 위해 초기설계에 제연경계의 높이를 최대한계로 설계한 후 시뮬레이션 등의 다양한 방법을 통한 합리적인 풍량 결정이 이루어져야 할 것으로 판단된다.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.533-546
• /
• 2023

Cost-effective solutions provided by composite construction are gaining popularity which, in turn, promotes the appearance on the market of new types of composite sections that allow not only to take advantage of the synergy of steel and concrete working together at room temperature, but also to improve their behaviour at high temperatures. When combined with high performance materials, significant load-bearing capacities can be achieved even with reduced cross-sectional dimensions. Steel-reinforced concrete-filled steel tubular (SR-CFST) columns are one of these innovative composite sections, where an open steel profile is embedded into a CFST section. Besides the renowned benefits of these typologies at room temperature, the fire protection offered by the surrounding concrete to the inner steel profile, gives them an enhanced fire performance which delays its loss of mechanical capacity in a fire scenario. The experimental evidence on the fire behaviour of SR-CFST columns is still scarce, particularly when combined with high performance materials. However, it is being much needed for the development of specific design provisions that consider the use of the inner steel profile in CFST columns. In this work, a new experimental program on the thermo-mechanical behaviour of SR-CFST columns is presented to extend the available experimental database. Ten SR-CFST stub columns, with circular and square geometries, combining high strength steel and concrete were tested. It was seen that the circular specimens reached higher failure times than the square columns, with the failure time increasing both when high strength steel was used at the embedded steel profile and high strength concrete was used as infill. Finally, different proposals for the reduction coefficients of high performance materials were assessed in the prediction of the cross-sectional fire resistance of the SR-CFST columns.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.99-104
• /
• 2008

The combustion properties of sandwich panels were tested and analyzed according to ISO 13784-1(Room Corner Test for Sandwich panel building systems) test method for the purpose of establishing the classification of reaction to fire performance. Several variables including heat release rate, smoke production rate, FIGRA, SMOGRA, and so on, were analyzed for specific four materials about sandwich panel systems on each 5 times, totally 20 times. Finally, elements for Classification system were suggested and evaluations for those elements were made.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.635-638
• /
• 2003

This paper deals with structural behavior of reinforced concrete beams with high strength under fire and fire damaged condition. The main purpose of this study is to evaluate the residual strength of flexural members by exposure time to fire. For this purpose, six beam specimens are fabricated and experimented. Among the specimens, four specimens are exposed to the fire for 60 and 90 minutes and two specimens are control beam that is not exposed to fire. After being cooled in room temperature, the specimens are loaded to the failure. The research result shows that the main variables of the test, concrete cover and exposure time to fire are much influenced on the structural behavior and the residual strength.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.127-128
• /
• 2006

A study developing the dry powder fire extinguishing system inside the simulated machinery spaces of small boats was performed. Fire tests were conducted inside the compartments having volumes 2.9, 4.5, $8m^3$ respectively. The openings and fans were established on the walls of the compartments. Diesel oil was used for the test fuel, In addition fire extinguishing nozzles using dry powder were installed downward at ceiling and horizontally at the wall or conner. All fires in the test were extinguished under system activation and there was no reignition.