• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.24-29
• /
• 2017

This study was conducted to identify nesting habits and breeding biology of barn swallow in Gwangju, Korea, for the breeding season 2012 to 2014. All nests were attached to vertical walls and roofs of buildings and situated at mean height $2.9{\pm}0.3m$ above ground with nest diameter $18.2{\pm}3.2cm$, nest depth $9.8{\pm}3.1cm$, nest cup diameter $11.2{\pm}1.5cm$ and nest cup depth $3.27{\pm}0.80cm$. Nests were attached to cemented walls (44.9%), wooden materials (23.1%), bricks (21.8%) and lighting (6.4%). The average clutch size was 4.5 and ranged 2~5. Mean egg length was $18.23{\pm}0.73mm$, breadth $13.11{\pm}0.25mm$, volume $1.60{\pm}0.11cm^3$, shape index $1.39{\pm}0.05$ and weight $1.69{\pm}0.15g$. Hatching and fledgling success rate were 89.1% and 84.5%. Main causes for reproductive failures were unhatched eggs, predation, nest destruction and desertion. These results are expected to be widely used as data for habitat preservation and species management of barn swallows.

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.165-184
• /
• 1996

The earthquake(M=4.5 by KMA), which occurred in the northeastern part of Yeongweol($37^{\circ}$ 15.75' N, $128^{\circ}$ 42.13' E) on December 13, 1996, shows shallow focal depth(about 8.0km) and relatively large felt area covering most of the southern peninsula. This is the first medium-size earthquake in inland region of the southern peninsula since 1978. It did not trigger foreshock but 13 aftershocks($M{\;}{\geq}{\;}2.5$) for a month. The intensity based on the felt area estimation of about 400 places shows MIMI III-VII in inland region, II on Cheju Island and I on ulreung Island. The isoseismal of MIMI VII shows an elongated circle in the direction of NE-SW and covers some parts of Jungdong-myon, Yeongweol-kun, Sindong-eup and Nam-myun, Jeongseon-kun. There occurred quite strong shaking, numerous cracks on the walls of buildings, falling and movement of slate and tiles on the roofs, falling of tiles from the wall and falling of materials from desks, rock falling from mountain and collapse of gravel layers on the river side. Mainshock and aftershocks occurred condensely between Yemi and Hwaam areas. The felt area due to the Yeongweol earthquake is Quite larger than those of similar size earthquakes in the Korean Peninsula.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.243-250
• /
• 2003

Polyurethane waterproof (PW) coatings are increasingly demanded in Korea for repairing cracks on old building roofs and construction of many sporting facilities. Calcium carbonate, a common filler, is incorporated in PW compositions. In this study, PW coatings were prepared by substituting a part of calcium carbonate with fly ash. The maximum amounts of calcium carbonate which can be substituted by fly ash obtained in the cyclone and bag filter dust collectors were 20 and 10%, respectively. It was found that the curing rate of PWs ran be controlled by varying the amount of Pb-octoate catalyst. The elongations at break as well as tensile strength and tear strength of PW coatings containing fly ash could also be adjusted such that their values were comparable to those of a standard PW coating by varying relative amounts of some components. However, the amount of cadmium, mercury, and lead leached from PW coatings containing fly ash obtained from the bag filter collector exceeded the respective allowed upper limits, mainly due to the initial high contents of them in the fly ash. On the other hand, PW coatings containing fly ash obtained from the cyclone collector exhibited better mechanical properties and did not release any significant amounts of the heavy metals. Thus, it was concluded that PW coatings containing fly ash can be utilized for practical applications as long as an appropriate fly ash is used.

• Korea Real Estate Review
• /
• v.28 no.4
• /
• pp.53-62
• /
• 2018

When the contractor does not receive payment for his work due to the client's funding default, he can take various legal measures against the client, in addition to refusing to transfer the building under construction to the client. To claim top payment priority and to demand the equal enforcement of the law by applying for compulsory auction or auction by exercising the right of lien, the contractor should know the construction phase or the point in time when he could exercise a lien or apply for a forced auction of the unregistered building. This study was conducted to examine qualification for lien and auction of an unregistered building. First, the general criteria for qualification for lien from qualification for ownership were examined. This means that an unregistered building can be subject to lien from a certain point in time in the construction phase, where the ownership is qualified as an independent real estate with minimal pillars, roofs, and walls. Second, the contents of the narrow and broad auction qualification were analyzed. As the contractor can select the appropriate legal means to reimburse the construction cost for the unregistered building, the results of this study are expected to provide the bases for qualification for lien on and auction of unregistered buildings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.663-670
• /
• 2020

In the present study, we assessed the accuracy of aerial triangulation using a UAV (Unmanned Aerial Vehicle) capable of network RTK (Real-Time Kinematic) survey in a disaster situation that may occur in a semi-urban area mixed with buildings. For a reliable survey of check points, they were installed on the roofs of buildings, and static GNSS (Global Navigation Satellite System) survey was conducted for more than four hours. For objective accuracy assessment, coded aerial targets were installed on the check points to be automatically recognized by software. At the instance of image acquisition, the 3D coordinates of the UAV camera were measured using VRS (Virtual Reference Station) method, as a kind of network RTK survey, and the 3-axial angles were achieved using IMU (Inertial Measurement Unit) and gimbal rotation measurement. As a result of estimation and update of the interior and exterior orientation parameters using Agisoft Metashape, the 3D RMSE (Root Mean Square Error) of aerial triangulation ranged from 0.153 m to 0.102 m according to the combination of the image overlap and the angle of the image acquisition. To get higher aerial triangulation accuracy, it was proved to be effective to incorporate oblique images, though it is common to increase the overlap of vertical images. Therefore, to conduct a UAV mapping in an urgent disaster site, it is necessary to acquire oblique images together rather than improving image overlap.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.1
• /
• pp.9-17
• /
• 2022

Rural spaces are increasingly valuable as areas for introducing renewable energy infrastructure to achieve carbon neutrality. Rural areas are the living grounds of rural residents, and the balance of conservation and development for rural areas is important for the introduction of reasonable facilities. In order to maintain a balance between development and preservation and to introduce reasonable renewable energy facilities, it is necessary to develop a current status survey and an effective survey method to utilize a space capable of introducing renewable energy facilities such as idle land and vacant houses. Therefore, this study was conducted to verify the readability using an unmanned aerial vehicle, and the main results are as follows. The detection of photovoltaic power generation facilities using unmanned aerial vehicles was effective in analyzing the location and area of photovoltaic panels located on the roofs of buildings, and it was possible to calculate the expected power generation by region through the area calculation of photovoltaic panels. The vacant house detection can be used to select an investigation target for an vacant house condition survey as it can identify damage to buildings that are expected to be empty houses, management status, and electricity supply facilities through aerial photos. It is judged that the unmanned aerial vehicle detection capability can be utilized as a method to improve the efficiency of investigation and supplement the data related to solar power generation facilities and vacant houses provided by public institutions. Although this study detected the status of solar power generation facilities and vacant houses through high-resolution aerial image analysis, as a follow-up study, automatic measurement methods using the temperature difference of solar power generation facilities and general characteristics of vacant houses that can be read from the air were investigated. If the deriving research is carried out, it is judged that it will be possible to contribute to the improvement of the accuracy of the detection result using the unmanned aerial vehicle and the expansion of the application range.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.393-399
• /
• 2021

In this study, experiments were conducted to estimate the PM concentrations by learning the nighttime CCTV images of various PM concentrations environments. In the case of daytime images, there have been many related studies, and the various texture and brightness information of images is well expressed, so the information affecting learning is clear. However, nighttime images contain less information than daytime images, and studies using only nighttime images are rare. Therefore, we conducted an experiment combining nighttime images with non-uniform characteristics due to light sources such as vehicles and streetlights and building roofs, building walls, and streetlights with relatively constant light sources as an ROI (Region of Interest). After that, the correlation was analyzed compared to the daytime experiment to see if deep learning-based PM concentrations estimation was possible with nighttime images. As a result of the experiment, the result of roof ROI learning was the highest, and the combined learning model with the entire image showed more improved results. Overall, R² exceeded 0.9, indicating that PM estimation is possible from nighttime CCTV images, and it was calculated that additional combined learning of weather data did not significantly affect the experimental results.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.1
• /
• pp.50-61
• /
• 2024

The market for compact houses is growing due to the demand for floor plans prioritizing user needs. However, clients often have difficulty communicating their spatial requirements to professionals including architects because they lack the means to provide evidence, such as spatial configurations or cost estimates. This research aims to create a framework that can translate sketched data-driven spatial requirements into 3D building components in BIM models to facilitate spatial understanding and provide building performance analysis to aid in budgeting in the early design phase. The research process includes developing a process model, implementing, and validating the framework. The process model describes the data flow within the framework and identifies the required functionality. Implementation involves creating systems and user interfaces to integrate various systems. The validation verifies that the framework can automatically convert sketched space requirements into walls, floors, and roofs in a BIM model. The framework can also automatically calculate material and energy costs based on the BIM model. The developed frame enables clients to efficiently create 3D building components based on the sketched data and facilitates users to understand the space and analyze the building performance through the created BIM models.

• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.16-34
• /
• 2015

Impervious covers(IC) are artificial structures, such as driveways, sidewalks, building's roofs, and parking lots, through which water cannot infiltrate into the soil. IC is an environmental concern because the pavement materials seal the soil surface, decreasing rainwater infiltration and natural groundwater recharge, and consequently disturb the hydrological cycle in a watershed. Increase of IC in a watershed can cause more frequent flooding, higher flood peaks, groundwater drawdown, dry river, and decline of water quality and ecosystem health. There has been an increased public interest in the institutional adoption of LID(Low Impact Development) and GI(Green Infrastructure) techniques to address the adverse impact of IC. The objectives of this study were to construct the modeling site for a samll urban watershed with the Storm Water Management Model(SWMM), and to evaluate the effect of various LID techniques on the control of rainfall runoff processes and non-point pollutant load. The model was calibrated and validated using the field data collected during two flood events on July 17 and August 11, 2009, respectively, and applied to a complex area, where is consist of apartments, school, roads, park, etc. The LID techniques applied to the impervious area were decentralized rainwater management measures such as pervious cover and green roof. The results showed that the increase of perviousness land cover through LID applications decreases the runoff volume and pollutants loading during flood events. In particular, applications of pervious pavement for parking lots and sidewalk, green roof, and their combinations reduced the total volume of runoff by 15~61 % and non-point pollutant loads by TSS 22~72 %, BOD 23~71 %, COD 22~71 %, TN 15~79 %, TP 9~64 % in the study site.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.24-31
• /
• 2016

The increase of impervious area in cities caused the unbalanced water cycle system and the accumulated various contaminants, which make troubles as introducing into watershed. In Korea, most of rainfall in a year precipitate in a summer season. This indicate that non-point source pollution control should be more important in summer and careful rainfall reuse strategy is necessary. Accordingly, the aim of this study is to monitor the characteristics of rainfall contaminants harvested in roofs and to develop the rainfall treatment system which are designed to fit well in a typical domestic household including rain garden. The rain garden consists of peatmoss, gravel and san to specially treat the initial rainfall contaminants. For this purpose, lab scale experiments with synthetic rainfall had been conducted to optimize the removal efficiency of TN, TP and CODcr. After lab scale experiments, field scale rainfall treatment system installed as a pilot scale in a field. This system has been monitored during June to July in 2015 in four time rainfall events as investigating the function of time, rainfall, and pollutant concentrations. As results, high loading of pollutants were introduced to the rainfall treatment system and its removal efficiency is increased as increase of pollutant concentrations. Since it is common that the mega-size of rainfall treatment system is not attractive in urban area, small scale rainfall treatment system is promising to treat the non-point source contaminants from cities. In addition, this small scale rainfall treatment system could have a potential to water resue system in islands, which usually suffer the shortage of water.