• Journal of Chest Surgery
• /
• 제19권4호
• /
• pp.644-662
• /
• 1986

Seventy cases of open heart surgery were performed in the department of Thoracic and Cardiovascular Surgery, Pusan Paik Hospital, Inje College, from Oct. 1985 to Oct. 1986. And the results were summarized as follows. 1. Among the 70 cases, there were 48 cases of congenital heart anomalies and 22 cases of acquired rheumatic valvular heart diseases. Age range of the congenital patients was 7 months to 31 years with the mean age of 10 years, and the acquired patients was 18 to 62 years with the mean age of 40 years. 2. The heart-lung machine used for cardiopulmonary bypass was Sarns 7000, 5-head roller pump, and the number and type of oxygenators were 5 of membrane type and 65 of bubble type. For all cases GIK [glucose-insulin-potassium] solution was used as cardioplegic solution for myocardial protection during operation. 3. Among the 48 congenital anomalies, there were 12 cases of ASD group, 29 of VSD group, 3 of ECD, 3 of TOF and one of PDA + MR, and to all of which the appropriate radical operations were applied. 4. Among the 22 acquired valvular diseases, there were 11 cases of mitral valve diseases [MS; 4, MSr; 3, MRs; 4], 3 cases of aortic valve diseases [AR:1, ARs;1, ASr;1], 4 cases of double valve diseases [MRs+TR; 3, MRs+ARs; 1] and 4 cases of triple valve diseases [MSr+ASr+TR; 3, MSr+Ar+TR; 1]. To all the diseased mitral and aortic valves, artificial valve replacement was applied except one [As], in which valve plication was applied. And to all the diseased tricuspid valve, DeVega annuloplasty was applied. 5. The number of replaced artificial valves were 29 in 25 patients [congenital; 3, acquire; 22]. In MVR, 6 of mechanical valves [St. Jude Medical valve; 6] and 15 of tissue valves [Carpentier-Edward valve; 11, lonescu-Shiley valve; 4] were used. In AVR, 6 of mechanical valves [St. Jude Medical valve; 6] and 2 of tissue valves [Carpentier-Edward valve; 2] were used. 6. Postoperative complications were occurred in 12 cases. Among them 11 cases were recovered with intensive cares, but one patient [VSD + Fistula of Valsalva sinus] was expired with low cardiac out put syndrome.

• Journal of Chest Surgery
• /
• 제21권2호
• /
• pp.351-365
• /
• 1988

During one year[1987], 110 cases of open heart surgeries were performed in the department of Thoracic and Cardiovascular Surgery, Pusan Paik Hospital, Inje Medical College. And the results were summarized as follows. 1. Among the 110 cases, there were 77 cases of congenital heart diseases and 33 cases of acquired heart diseases. Age range of the congenital patients was 8 months to 30 years with the mean age of 8 years, and acquired patients was 16 to 56 years with the mean age was 32 years. 2. The heart lung machine used for cardiopulmonary bypass was Sarns 7000, 5-head roller pump, and the number and type of oxygenators were 50 of membrane type and 60 of bubble type. For all cases GIK[glucose-insulin-potassium] solution was used as cardioplegic solution for myocardial protection during operation. 3. Among the 77 congenital anomalies, there were 67 cases of acyanotic patients[ASD: 12, VSD: 50, PS: 1, AP window: 1, Gerbode defect: 1, ECD: 2] and 10 cases of cyanotic patients[TOF: 10], and to all of which the appropriate radical operations were applied. 4. Among the 33 acquired diseases, there were one case of left atrial myxoma, one of annuloaortic ectasia, 20 of mitral valve diseases[MS: 2, MSr: 8, MR: 2, MRs: 8], 9 of double valve diseases[MRs+AR: 1, MRs+ARs: 2, MRs+TR: 1, MSr+TR: 3, MSr+ASr: 1, MSr+ARs: 1], 2 of triple valve diseases[MSr+AR+TR: 1, MSr+ASr+TR: 1]. The left atrial myxoma was removed well with right atriotomy and atrial septal approach. And to the annuloaortic ectasia, Bentall operation was applied with good result. Mitral valve replacement[MVR] was applied to 20 cases of mitral valve diseases, double valve replacement[MVR+AVR] was applied to 6 cases of double valve diseases, MVR & tricuspid annuloplasty[TVA] was applied to 3 cases of mitral 5. The number of replaced valve were 39 in 31 cases. In MVR, 5 of mechanical valves[St. Jude Medical Valve] and 26 of tissue valves[Carpentier-Edward valve] were used. In AVR, 3 of mechanical valves and 5 of tissue valves were used. 6. Postoperative complications were occurred in 23 cases, and among them 21 cases were recovered with intensive cares, but 2 cases were expired[mortality: 1.8%].

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.203-208
• /
• 2006

This study was conducted to improve the control performance of a current variable-rate controller for granular fertilizers. Simulation model was developed. Optimized proportional, integral and derivative gains were determined by simulation model using 2nd order PID gain learning algorithm, and these control gains were evaluated through the field tests. Important results of this study are as follows; 1. Principles of pre-existing variable-rate application of granular fertilizers were investigated. 2. Simulation model of a PID controller that could simulate the control system was developed by using Matlab/Simulink program. The program was to determine PID control coefficients through the simulation model and 2nd order PID gain learning algorithm. 3. PID control coefficients obtained from the simulation were applied to the developed model. When the step input was given, Maximum overshoot were 1.96%, rise time were 0.05 sec, settling time were 0.06 sec and steady state error were 0.21 % respectively. 4. The simulation model was verified through field tests. The errors of maximum overshoot were 10%, rise time were 0.11 sec, settling time were 0.40 sec and steady state error were 8% because of loads and noises. Rise time was decreased to one third of that of the pre-existing system. 5. If the speed of a fertilizing machine is $0.3{\sim}0.6\;m/s$ and the maximum rotation speed of a discharging roller is 64 rpm, rise time would be 0.26 sec and fertilizing machine would cover the distance of $0.07{\sim}0.15\;m$ with settling time of 0.4 sec, fertilizing machine would cover the distance of $0.12{\sim}0.24\;m$.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.196-201
• /
• 2014

In this study, nanocrystalline Cu-Ni bulk materials with various compositions were cold compacted by a shock compaction method using a single-stage gas gun system. Since the oxide layers on powder surface disturbs bonding between powder particles during the shock compaction process, each nanopowder was hydrogen-reduced to remove the oxide layers. X-ray peak analysis shows that hydrogen reduction successfully removed the oxide layers from the nano powders. For the shock compaction process, mixed powder samples with various compositions were prepared using a roller mixer. After the shock compaction process, the density of specimens increased up to 95% of the relative density. Longitudinal cross-sections of the shock compacted specimen demonstrates that a boundary between two powders are clearly distinguished and agglomerated powder particles remained in the compacted bulk. Internal crack tended to decrease with an increase in volumetric ratio of nano Cu powders in compacted bulk, showing that nano Cu powders has a higher coherency than nano Ni powders. On the other hand, hardness results are dominated by volume fraction of the nano Ni powder. The crystalline size of the shock compacted bulk materials was greatly reduced from the initial powder crystalline size since the shock wave severely deformed the powders.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• 한국축산시설환경학회지
• /
• 제19권1호
• /
• pp.9-18
• /
• 2013

Currently, there was no producing system of TMR for pig feeding in Korea. In this study, we examined unrolling, cutting, and softening for the round bale silage. We designed and developed the prototype system of round bale silage for pig feeding. Unroll method were lower chain conveying and upper belt conveying which includes an hydraulic vertical fodder knife. Gathering and cutting method were rotating auger and flywheel which have 10 cutters, input roller of 280 rpm, and cutter rotating speed of 1,750 rpm. Softening device was rotating hammer in inclined cylinder adjustable to $25^{\circ}C$ and rotating speed up to 1,300 rpm. The prototype system was integrated working for unrolling, cutting, and softening. We found that when the round bale silage in unrolling apparatus cut length of 20 cm to input cutting apparatus, the cutting performance was well in continuous working up to input rate of 1,000 kg/h, the softening apparatus was working well.

• 한국지반공학회논문집
• /
• 제27권8호
• /
• pp.5-16
• /
• 2011

본 연구에서는 여러 가지 시험조건으로 실제 현장규모로 다짐을 수행한 후 연속다짐방법과 새로운 다짐도 평가에 관한 절차를 제안하고 가속도계를 이용한 다점도 평가와 기존의 다짐도 평가 시험(평판재하시험, 현장들밀도시험 및 동평판재하시험 등)과의 상관관계를 분석하였다. 기속도계를 이용한 다짐도 평가를 현장에서 사용할 수 있는지에 대한 적용성을 평가하고 가속도계를 이용한 다짐도 평가를 통계적 방법에 의해 분석하고 평가하였다. 평가결과 선속성, 편리성, 숙련도 면에서 가속도계를 이용한 연속다짐평가가 가장 적합한 방법으로 판단되었다. 또한 현장다짐 시 사용되는 설계기준값을 제안하고 제안된 설계기준값과 추가적인 현장시험 결과와의 비교를 통해 가속도를 이용한 연속다짐 측정값에 대한 적용성을 검증하였다.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.310-319
• /
• 2007

To investigate the catches of squid jigging fishery, a series of fishing experiments was conducted in the high seas of the Northwest Pacific($40^{\circ}-43^{\circ}N$, $150^{\circ}-155^{\circ}E$) during the period of 1 August to 22 October 2005 by commercial fishing vessel. The number of 142 test fishing was carried out in the Northwest Pacific during 83days. The total catch were 47,524kg as 4 squid species and CPUE was $8.9kg/line{\cdot}day$. CPUE showed high values in the frontal zone during the survey. Main squid species caught from the experimental fishing were the neon flying squid, Ommastrephes bartrami(96.8%) and the boreopacific gonate squid, Gonatopsis borealis(3.2%). Dorsal mantle length of the neon flying squid were increased by the time and increasing of the hook size. Loss rate of the neon flying squid in the water showed the highest values in 28.2% compare to the others. And the loss rate of the front roller and in the air were 1.1% and 1.0%, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.987-992
• /
• 2009

본 연구에서는 지반 반발력을 측정하는 상용 컴팩토미터와 일반가속도계에서 얻은 진동가속도를 분석하여 도출한 다양한 다짐도 평가 값 (CMV-A, CCV1, CCV2, PWRI)들을 비교 분석하였다. 본 모형시험지반의 자연함수비는 최적함수비 보다 약 20%가량 커 기존 다짐도 평가방법인 들밀도시험으로 구한 건 조단위중량이 다짐횟수의 증가에 상관없이 일정하게 나타나 잘 다져지지 않는 것으로 나타났으며, 지오게이지와 동평판재하시험으로 구한 강성계수 $E_G$, $E_{LFWD}$ 도 동일한 경향을 나타냈다. 진동가속도에 대한 주파수 분석으로 구한 다양한 다짐도 평가 값과 컴팩토미터에서 얻은 CMV-C 값 모두 들밀도시험, 지오게이지, 동평판재하시험 그리고 동적콘관입시험 결과와 동일하게 다짐횟수 증가에 크게 상관없는 것으로 나타났다. 추후 다양한 지반조건에 대한 시험 결과를 축적, 분석하여 기존 다짐도 평가방법과의 정량적 상관관계 규명이 필요할 것으로 판단된다.

• 대한가정학회지
• /
• 제37권3호
• /
• pp.175-191
• /
• 1999

The purpose of this study was to investigate the eating behavior and life habits of kindergarten children 5 to 7 years old in Chuncheon area. This study was conducted in December, 1996. Anthropometric indices(height, weight, skinfold thickness, mid-arm circumference) were measured and body mass index(BMI), Rohrer index, arm fat area were calculated to estimate children’s body fatness. Also the eating behavior and life habits were determined tv using questionnaire method. The results were as follows: Body fat rate of the children was almost normal according to Rohrer index and BMI. There was significant difference in birth weight between male and female. The problems of the eating behavior were frequent skipping breakfast and eating-out. The rate of the children who took snacks 2 times a day was 46.9％. Most children tended to take sweet snacks such as ice-cream, chocolates, cookies, and they tended to prefer meats and fishes to vegetables. The rate of breast feeding was 28.3％ and the rate of weaning foods prepared at home was 61.1%. Many children preferred indoor activities such as watching TV, toy furniture play, building block to outdoor activities such as roller-skating, cycling, jogging in their spare time. The rate of the children who took exercise regularly was 15％. Children tended to eat kimbap, fried chicken, ramyeon more frequently in various instant foods. The intake rates of fruit juice and barly tea were relatively high and children's favorite fruits were watermelon and mandarin orange. From this results, skipping breakfast, frequent eating-out and the monotony of food preference appears to cause imbalance in nutrient intakes of the children and to have bad influence on children’s health. Accodgingiy, the comprehensive nutrition education and proper modification program should be needed for the children and their parents to correct the eating behavior and life habits. The reasonable exercise programs are needed to motivate outdoor activities of the children, and the importance of breast feeding and weaning foods should be emphasized to lactating women and pregnant women.