• Journal of Information Display
• /
• 제2권4호
• /
• pp.15-18
• /
• 2001

We report simple techniques to manufacture low-powered, high-resolution, reflective cholesteric displays using flexible plastic substrates. We use wax transfer printing to replace photo-lithography and incorporate polymer walls to increase the mechanical strength and lifetime of the displays. These printing methods can easily be adapted to roll-to-roll production.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.96-102
• /
• 2008

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.987-992
• /
• 2014

Register control of roll-to-roll printing system for printed electronics requires accurate measurement of register errors. The register marks used for the recognition of patterns position between layers have inherently defects due to low printability of register marks themselves, which brings out inaccurate register accuracy and consequently low performance of printed electronics devices. In this study, the compensation methods for the unrecognized or missing register data are proposed to improve the recognition and consequently the control performance of register accuracy in roll-to-roll printing equipment. The compensation methods using the prior data and the linear interpolation are proposed and compared with the case without compensation for the simulation as well as experiment. Only the linear interpolation method could successfully compensate the missing data and consequently improve the register control performance. We should apply the compensation process of the register errors to improve the register control accuracy in the roll-to-roll printing equipment.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1563-1568
• /
• 2012

인쇄전자는 RFID 나 유연 디스플레이 등의 전자회로나 소자를 인쇄방식으로 제작하는 공정이다. 특히 롤투롤과 같은 웹 이송방식 프린팅은 얇은 필름형태의 웹(Web)에 그라비아 인쇄나 고속 잉크젯과 같은 방법으로 이송중인 웹 상에 회로를 형성하는 공법이다. 이 공정은 생산단가가 저렴하고 고속생산이 가능하다는 이점이 있다. 다층구조를 가지는 회로나 디바이스를 생산할 때, 층과 층을 얼마나 정확하게 중첩시켜 인쇄하는가 하는 것은 인쇄된 전자회로의 집적도와 성능을 결정짓는 중요한 요소이다. 인쇄전자공법을 상용화하기 위해서 높은 중첩정밀도 구현이 선행되어야 한다. 본 연구에서는 롤투롤 인쇄방식에서 중첩정밀도의 향상을 위한 위치측정 시스템을 제안하고 신뢰성을 확인하였다. 또한 웹이 변형되었을 때의 측정 강인성도 실험적으로 확인하였다.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.642-646
• /
• 2014

This research describes the measurement of roll parallelism by a laser interferometer. Parallelism among rolls is an important factor for improving the precision of printing devices. A laser interferometer, which is a device for the precise measurement of distance, can be utilized to measure parallelisms between rolls. To measure distance between two rolls by using a laser interferometer, the laser must not be severed during measurement. To achieve this condition, a linear motion guide was installed to each roll being measured, and continuous measurement of distance between two rolls was implemented by the simultaneous control of two mirrors installed on the guides. The method to measure parallelism between two rolls presented in this research can be utilized to improve printing precision by enhancing parallelism between rolls in printing devices.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.553-554
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.204.1-204.1
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.597-598
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.353-354
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.951-952
• /
• 2008