• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.534-539
• /
• 2006

The supply of oxygen for aeration is the largest energy consumer at activated sludge wastewater treatment plants. Replacement of less efficient aeration systems with fine pore aeration devices can save up to 50 percent of aeration energy costs. The purpose of this study was the diagnosis and evaluation of a domestic wastewater aeration system by the off-gas method which had been studied by US EPA and ASCE. For this study, an off-gas analyzer and its hood were made to collect off-gas. Also, a vacuum pump was connected to the analyzer to make suction of off-gas. Experiments were conducted at a domestic activated sludge wastewater treatment plant which had a single spiral roll aeration system installed with P.E tube diffuser. Data on OTE(f), SOTE(pw), OUR, and air flow rate were obtained from these experiments. In case of replacing an aeration system, it is recommended that it should be replaced with perforated membrane disc or ceramic disc fine bubble diffusers installed in a full floor coverage or grid pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.261-269
• /
• 2019

This study investigates a method of designing pixel-type frequency selective surfaces(FSS) with flexibility while considering factors, such as polarization and incident angle. Among the various methods used to solve the discrete space problem when designing a pixel-type FSS, the binary particle swarm optimization(BPSO) algorithm is one of the most applicable techniques to determine the periodic structure pattern of an FSS. Therefore, a method of efficiently designing FSS with roll-off band pass characteristics using an improved BPSO algorithm is proposed. To solve the convergence problem in the fitness function design to induce particles in the desired solution, FSS with desired roll-off wave characteristics can be easily obtained by applying a fitness function using "slope" as an input parameter.

• Journal of the Korean Society of Costume
• /
• v.53 no.8
• /
• pp.121-135
• /
• 2003

The purpose of this study is to suggest a theoretical basis to name Sa(紗) and Ra(羅) remains properly by comparing and analyzing the name, usage, value, length and width of Sa(紗) and Ra(羅) recorded on documents made at the end period of Joseon. The features of Sa(紗) and Ra(羅) at the end of the Joseon Period are as follows. 1. The kinds of Sa(紗) are about 80, those of Ra(羅) are about 12, and those of Sa(紗) are significantly more than those of Ra(羅). In regard to the aspect of patterns, there were about 20 types of patterns in the case of Sa(紗), but no specific pattern for Ra(羅). 2. Some newly revealed patterns in the case of Sa (紗) are as follows. Baek -bok-mun(백복문) was a pattern full of ‘bats(박쥐[복])’, and Baek-jeop-mun(백접문) was a pattern full of ‘butterflies(나비[蝶])’ Jeop-mun(접문) was classified into ‘butterfly patterns(나비문[접문])’ and ‘traditional window flame patterns(창살문[접문])‘. 3. When considering the usages of Sa(紗) and Ra(羅), Sa(紗) was used for various detailed purposes according to their kinds and patterns, but Ra(羅) was mostly used for underwear. The most commonly used Sa(紗) was the Gab-sa type(甲紗類). On the contrary, the Go-sa type(庫紗類) was significantly less used than the Gab-sa type(甲紗類). However, it must have been of relatively high quality Sa(紗), shown by the fact that it was used for outer garments. In addition, the Gung-sa type(宮紗類) was the best quality Sa(紗), shown by the fact that it was used for court dress and official uniforms in the royal court. 4. Sa(紗) and Ra(羅) whose features have been examined we Gapsa(甲紗), Sun-in (純仁), Gosa(庫紗), Gwansa(官紗), Jusa(走紗), Eunjosa(은조사), Gwangsa(廣紗), Waesa(倭紗), Dorisa(도리사), Gong-yangsa(공양사), Rasa(羅紗), Danghangra(唐亢羅), Yanghangra(洋亢羅), Yunjura(윤주라), Eunra(銀羅), Jeohangra(저항라), Chura(秋羅). 5. Regarding the values of Sa(紗) and Ra(羅), they were high quality textures and its length and width of 1 Pil(疋), a roll of cloth, were not subdivided in detail such as in the case of plain weaved silks(平絹).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.95-101
• /
• 2017

In this paper, the sizing removal condition for the pretreatment of composite materials is obtained numerically by applying an image processing algorithm and nickel-plated carbon fiber is fabricated by a dry process method to enhance its electromagnetic shielding performance. Sizings that are wrapped in a polymer type material during the manufacturing of carbon fiber should be removed for dry coating. A numerical value, that is the correlation, can be obtained by determining the regular pattern of the carbon fiber in the image taken by a scanning electron microscope (SEM) after the sizing is removed. The application of the proposed numerical method to the SEM image of the fiber after the sizing is removed with solution, compressed air, solution and compressed air (hybrid), showed that this method of eliminating the sizing is superior to the hybrid method. Then, by spreading the carbon fiber roll with the sizing removed, we were able to produce nickel plated carbon fiber by the roll-to-roll sputtering method. The electromagnetic shielding performance of the fabricated 30, 40 and 100 nickel coated carbon fibers was measured. The Korea Advanced Institute of Science and Technology evaluated the electromagnetic shielding performance of the 100 nickel-coated carbon fiber to have a maximum value of 73.2 (dB) and a minimum value of 66.7 (dB). This is similar to the electromagnetic shielding rate of copper and shows that this material can be used as a cable for EV / HEV automobiles.

• Journal of Fashion Business
• /
• v.13 no.5
• /
• pp.37-44
• /
• 2009

As the modern society has become highly industrialized and functionalized, the entry of women in public affairs has become brisk and extensive, and the studies of jackets which can satisfy the functions and designs for various activities have become important. Especially in the tailored collar which is the typical collar for female jackets, the studies such as scientific original form design, and design evaluation through analyzing functionality and sensitivity and others must be systematically carried out. In this study, therefore, the objective was placed in examining the actual state of the production of the tailored collar in the field of production first, and inquiring the general theories on the constituent elements of tailored-collar and production methods by analyzing it and comparing it with the educational tailored-collar production methods. First, in regard to the relation between the collar and the length of the backside neck of the bodice, in most cases, they were employing the method to enlarge the length of the backside neck of the bodice by shortening the length of the neck-base girth. That is, they were processing in order that the self collar band inside of the roll line and the fall of the collar can make a soft curved line. Second, when producing tailored-collar patterns, it is desirable to very the inclination according to the breath of the collar or thickness of the fabric because the stability of the inclination of the collar differs depending on the condition the collar is set, the girth of the collar edge. the broader the breath of the collar becomes, the thicker the fabric becomes, and the more the cloth is against the cold, it is necessary to make the inclination larger. Third, in the size relation between the upper collar and under collar, when sewing collars, it becomes thick and stabilized as it goes from the part in which extra pieces were put to the part in which extra pieces are not put. So you must make the upper collar larger by putting in extra pieces. The amount to be put in differs depending on characteristics of the materials.

• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.254-264
• /
• 2019

Objective: To evaluate the short-term changes in masticatory muscle activity and mandibular movement patterns after orthognathic surgery in skeletal Class III patients with facial asymmetry. Methods: Twenty-seven skeletal Class III adult patients were divided into two groups based on the degree of facial asymmetry: the experimental group (n = 17 [11 male and 6 female]; menton deviation ${\geq}4mm$) and control group (n = 10 [4 male and 6 female]; menton deviation < 1.6 mm). Cephalography, electromyography (EMG) for the anterior temporalis (TA) and masseter muscles (MM), and mandibular movement (range of motion [ROM] and average chewing pattern [ACP]) were evaluated before (T0) and 7 to 8 months (T1) after the surgery. Results: There were no significant postoperative changes in the EMG potentials of the TA and MM in both groups, except in the anterior cotton roll biting test, in which the masticatory muscle activity had changed into an MM-dominant pattern postoperatively in both groups. In the experimental group, the amount of maximum opening, protrusion, and lateral excursion to the non-deviated side were significantly decreased. The turning point tended to be shorter and significantly moved medially during chewing in the non-deviated side in the experimental group. Conclusions: In skeletal Class III patients with facial asymmetry, the EMG activity characteristics recovered to presurgical levels within 7 to 8 months after the surgery. Correction of the asymmetry caused limitation in jaw movement in terms of both ROM and ACP on the non-deviated side.

• Korean Journal of Microbiology
• /
• v.20 no.4
• /
• pp.189-194
• /
• 1982

Acid protease produced from Aspergillus tubingensis was pruified by ethanol fractionation, dialysis, and DEAE cellulose column chromatography. As a result of purification its specific activity increased to 5.4 times, and percent recovery was 39. The kinetic constants of the enzyme were studied. Km and Vmax was $1.5{\times}10^{-7}M\;and\;0.11{\Delta}O.D/min$ , respectively, when casein was used as substrate. The order of Km value of several proteins is : casein

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1204-1208
• /
• 2011

In this study, we proposed the system that calculates the algorithm with an accelerometer signal and detects the fall shock and it's direction. In order to gather the activity patterns of fall status and attach on the subject's body without consciousness, the device needs to be small. With this aim, it is attached on the right side of subject's waist. With roll and pitch angle which represent the activity of upper body, the fall situation is determined and classified into the posture pattern. The impact is calculated by the vector magnitude of accelerometer signal. And in the case of the elderly keep the same posture after fall, it can distinguish the situation whether they can stand by themselves or not. Our experimental results showed that 95% successful detection rate of fall activity with 10 subjects. For further improvement of our system, it is necessary to include tasks-oriented classifying algorithm to diverse fall conditions.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.45-58
• /
• 2011

Gravure off-set printing recently is used in electronics display market. This method has advantages of mass production and high printing speed. It is also fine pattern can be implemented. We have manufactured low-curable conductive Ag pastes for gravure off-set printing. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape and size, epoxy resin, solvent and homogenized on a standard three-roll mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had a good characteristics. With the manufactured paste in this study, touch panel had is manufactured and it had $4{\times}10-5{\Omega}.cm$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.40-48
• /
• 2003

Large eddy simulation is used to investigate the compressible flow over a open cavity, The sub-grid scale stresses are modeled using the dynamic model. The compressible Navier-Stokes equations are solved with the sixth order accurate compact finite difference scheme in the space and the 4th order Runge-Kutta scheme in the time. The results show a typical flow pattern of the shear layer mode of oscillation over the cavity. The votical disturbances, the roll-up of vorticity, and impingement and scattering of vorticity at the downstream cavity edge can be seen in the shear layer. Predicted acoustic resonant frequency is in good agreement with that of the empirical formula. The mean flow streamlines are nearly horizontal along the mouth of the cavity. The pressure has its minimum value in the vortex core inside the cavity.