• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.265-270
• /
• 2010

This paper presents the rocket motor support structure to position solid rocket engine within a missile fuselage. When the rocket motor is mounted inside a missile fuselage, fuselage structure must be designed to withstand various structural problems resulting from inserted rocket motor such as axial thrust force, shock/vibration, axial deformation of the rocket motor tank in addition to the flight loads. The motor support structure system proposed in this paper proved to be very simple and efficient while satisfying all the design requirements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.189-192
• /
• 2010

In this study, insensitive munitions(IM) policies and technologies of advanced countries for solid rocket motor were investigated. Development trends and caseworks of each part such as propellant and motor case of rocket motor for IM were also studied. Based on these investigation and analysis for IM rocket motor, directions of the development for IM rocket motor in our country were suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.275-282
• /
• 2008

This paper presents numerical investigation of multi-phase flow in solid rocket motor nozzle and effect of multi-phases on the performance prediction of the Solid Rocket Motor. Aluminized propellants are frequently used in solid rocket motors to increase specific impulse. An Eulerian-Lagrangian description has been used to analyze the motion of the micrometer sized and discrete phase that consist of the larger particulates present in the Solid Rocket Motor. Uniform particles diameters and Rosin-Rammler diameter distribution method has been used for the simulation of different burning of aluminum droplets generating aluminum oxide smokes. Roe-FDS scheme has been used to simulate the effects of the multi-phase flow. The results obtained show the sensitivity of this distribution to the nozzle flow dynamics, primarily at the nozzle inlet and exit. The analysis also provides effect of two phases on performance prediction of Solid Rocket Motor.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2762-2772
• /
• 1993

The paper deals with the flutter of a cantilevered beam subjected to a rocket thrust generated by a solid rocket motor. It is saaumed that the rocket thrust is to be a constant follower thrust, and produced by the installation of a solid rocket motor to the tip end of the cantilevered beam. The rocket motor is considered to be a rigid body having finite sizes, but not a mass point as it has been assumed so far. Governing equations are derived through the extended Hamilton's principle, and finite element method is applied to obtain the theoretical prediction for critical follower thrust. The maximum follower thrust is also calculated through the change of shear deformation parameter of the beam in the numerical simulation. The theoretical prediction for flutter or stability is verified by experiment. The experimental results show that critical follower thrust in theory agrees well with the experimental value taking account of the magnitude, rotary inertia of the rocket motor and the distance from the tip end of the beam to the center of gravity of the rocket motor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.133-137
• /
• 2010

A dual pulse solid rocket motor has several advantages compared to the single one. The range and the terminal velocity of the guided missile can be remarkably increased by the application of the pulse separation device(PSD) to the solid rocket motor which resulted in appropriate thrust distribution. In this study, the subscale dual pulse solid rocket motor with the bulkhead type PSD was designed, manufactured, and fire-tested. The bursting pressure, thermal characteristics, and the structural safety of the PSD were obtained by the tests and the results will be applied to the design of full-scale dual pulse rocket motor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.219-222
• /
• 2007

This research on 2nd stage solid rocket motor of KSLV-I for performance change was carried out. Solid rocket motor shall ignite on altitude of 300km. Solid Rocket Motor performed Static Firing Test and High Altitude Test for motor performance. A study made an analysis of specific impulse variation for nozzle ambient pressure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.495-499
• /
• 2005

The INHA Rocket Research Institute changed the Ceramic nozzle material of their developed Solid Composite Propellant Motor with Teflon nozzle material. Static firings of the new Solid Rocket Motors was conducted on Thurst Tester to validate the increase in performance. The new enhanced Solid Roket Motor increased the total impulse by 18.3 percent while improving its reliability. The new process of manufacture reduced the time to produce a nozzle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.144-149
• /
• 2007

Behaviour of a thread joint of a rocket motor case show complex structural characteristics. Pre-torque must be applied to the threads to prevent the loosening of the interface from the additional pressure load. During the pressurization of the rocket motor case, the jointing face may be opened if the pre-torque were not set properly or the structure may be failed if the local concentrated stress exceeds the strength of the material. In this paper, the structural behaviour of a thread joint of a rocket motor case were analyzed by the finite element method and the results were compared to the experimental ones. A method to set a pre-torque for a thread joint were proposed to ensure the structural safety.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.215-218
• /
• 2009

A design of a subscale solid propellant rocket motor was conducted to do the similitude experiments for the large scale rocket motor. One of the main factor to subscale was the mach number of the solid propellant flume through a nozzle exit The analysis of the flume flow was done to obtain the mach number for the large and subscale rocket motor. The flume shapes on the non dimensional axises by the nozzle exit diameter was matched each other. The propellant grain of a subscale solid rocket motor was designed by the profile of pressure vs time obtained by the mach number of the flume shape. Some analyses of the theoretical solution were compared with the results of the ground static test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1176-1179
• /
• 2017

In this study, internal ballistic analysis theories of dual-thrust solid rocket motor using two kinds of propellant are found, and the theories are applied to develop internal ballistic analysis model. Internal ballistic analysis which is dual-thrust solid rocket motor using two kinds of propellant is carried out an applying of the random figures of two kinds of propellant and an analyze of the test results. Through this analytical model was able to an applying internal ballistic analysis for dual-thrust solid rocket motor using two kinds of propellant.