• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1081-1086
• /
• 2010

The technical procedure of an enhancement of a 120 mm rocket assisted projectile has here addressed by analyzing the ballistic performance with several the solid rocket propellants and shell designs. The performance was evaluated by aero-ballistic analyses and static ground tests of the rocket motor. Consequently, firing tests showed that one of tested models gave about 70% of extended range compared with conventional projectiles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.60-66
• /
• 2019

In this report, the process characteristic(viscosity), mechanical properties, combustion characteristics, ground and flight test results of propellants used for a rocket-assisted projectile are described according to several aluminum contents. As the aluminum content increased, initial viscosity decreased, viscosity build-up accelerated, and combustion rate and pressure exponent decreased. In the ground fire test, the total impulse of the rocket-assisted projectiles containing 10 wt% of aluminum were 5% higher than that of the rocket-assisted projectiles containing 2 wt% and 18 wt% of aluminum. The motor efficiency compared to the theoretical performance was 85.6% with 18 wt% of aluminum, the lowest value among the propellant compositions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1072-1076
• /
• 2017

In this paper, a numerical study has been performed to analyze flow characteristics of rocket propulsion. Through the ground spin test, combustion chamber pressure was measured. Based on the experimental results, numerical analysis was conducted under various nozzle pressure ratio conditions such as standard, operating and base pressure conditions. And it was compared with quasi-1D solution and experimental result. In addition, the difference in thrust characteristics according to the spin/non-spin of the flow conditions was confirmed at the same nozzle pressure ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.173-176
• /
• 2009

The mortar system is useful for infantry because of effectiveness to position operation and to attack at opposite slope that can not reached by direct-firing guns and howitzers. The Army continuously has researched on 120mm mortar system, and insist needs for 120mm mortar system with advanced accuracy, mobility and range. In this study, we had designed the formulation of solid rocket propellants applied on 120mm rocket assisted projectile, and fabricated a prototype, and investigated feasibility of rocket assisted projectile for 120mm mortar results from static firing and flight test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2008

In this study, the design method of a 155 mm Solid Fuel Ramjet projectile is proposed and a flight performance analysis program through mathematical modelling is developed. Through flight performance analysis, ramjet performance during flight, which is comprised of thrust, specific impulse, pressure recovery ratio, location of shock waves, and magnitude of drag, was predicted. The results show that compared to Rocket Assisted Projectile(RAP), the range was increased by 90 %. Furthermore, how variations in nozzle exit area ratio and the intake area cause variations in range was observed. This research on modeling and simulation methodology will provide useful data for future development of solid fuel ramjet projectiles.