• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.404-407
• /
• 2003

In this paper, we have designed the humanoid robot's leg parts with 12 D.O.F. This robot uses ankle's joints to confirm stability of walking performance. It is less movable to use ankle's joints than to do upper body's balancing joints like IWR-III, which needs three parts of via points, support leg, swing leg and balancing joints. Instead, the proposed humanoid robot needs support leg and swing leg via points. ZMP(Zero Moment Point) is utilized to guarantee the stability of robot's walking. The humanoid robot uses the ankle's joints to compensate for IWR-III's balancing joints movement. Actually we concern about a motor performance when making a real humanoid robot. So a simulator is employed to know each joint torque of humanoid robot. This simulator needs D-H(Denavit-Hartenberg) parameters, robot's mass property and two parts of via points. The simulation results are robot's walking trajectories and each motor torque. Using the walking trajectories, we can see the robot's walking scene with 3D simulator. Before we develop the humanoid robot, simulation of the humanoid robot's walking performance is very helpful. And the torque data will be used to make humanoid's joint module.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.779-782
• /
• 1997

In this paper, accurate position control of a stenciling robot manipulator is designed. The stenciling robot is requried to draw lines and characters on the pavement. Since the robot is huge and heavy, the inertia is expected to play a major role in the tracking performance as desired. Here we are proposing neural network control scheme for a computed-torque like controller for the stenciling robot. On-line compensation is achieved by neural network. Simulation studies with stenciling robot are carried out to test the performance of the proposed control scheme.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1054-1059
• /
• 2005

To support the expansion of the autonomous robot market, the establishment of evaluation standards of the robot performance are essential. In this paper, to venture the standardization of the performance evaluation of the autonomous robot, the authors take the autonomous cleaning robot(ACR) as the initial stepping stone. Recently, the ACR has been being developed and marketed actively in many countries including Korea and it believes to be the fore-runner among various types of autonomous robot products. Standards of the performance evaluation for the ACR could be easily modified and applied to other autonomous robots. This paper formulates and suggests a group of standards for the performance evaluation based on a evaluation platform for the ACR. The newly developed performance evaluation platform has been designed to include all the important aspects of living environments in reality. In the platform the performance of the ACR is measured in terms of mobility, cleaning performance, avoidance of obstruction(safety), and operation noise. A few commercially available ACR products are collected and tested in the evaluation platform and compared against the performance evaluation standards formulated.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.179-190
• /
• 1999

To automate the polishing process, a polishing robot with two axes which is attached to a machining center with three axes has been developed by our previous research. This automatic polishing robot is able to keep the polishing tool normal to the curved surface of die and is able to maintain a constant pneumatic pressure. Therefore, in the case of a curved surface die, the surface roughness to be polished by the system with five axes is improved superior than the surface by a three-axis machining center. However, because the polishing robot was big and heavy, a polishing workspace was limited and then it was difficult to attach the robot to machining center. In this study, the smaller and lighter polishing robot than the previous has been designed to improve defects due to the magnitude and weight of the robot. And the sliding mode control ins applied to polishing robot to improve the tracking performance. To obtain switching parameters of sliding mode control, the signal compression method is used. Code separation program to separate the date for a three-axis machining center and a two-axis polishing robot from a five-axis NC data is improved for users to check conveniently the separated trajectory and to handle many data by using the graphic user interface. To evaluate the polishing performance of the developed robot, the polishing experiment for shadow mask was carried out. The result shows the automatic polishing robot has a good trajectory tracking performance and obtains a good polished workpiece efficiently under recommended polishing conditions.

• The Journal of Korea Robotics Society
• /
• v.7 no.4
• /
• pp.243-251
• /
• 2012

In this paper, developing of a pool cleaning robot is addressed. First, we analyze commercial pool cleaning robot mechanisms, and the merits and demerits of wireless version of a pool cleaning robot is introduced. And then the water-jet moving mechanism for a pool cleaning robot is proposed to improve energy efficiency and mechanical design advantage, which is one of the strong candidates for wireless pool cleaning robots. Next, the method of cleaning performance evaluation of pool cleaning robots is firstly defined with five key factors, and it was verified by experimental results. If the cleaning performance can be quantitatively defined, we can design optimally a pool cleaning robot, which results in the cost down.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.154-154
• /
• 2000

The cooperative strategy for the teleoperated multi-agent system is presented. And this scheme has been applied to the teleoperated robot soccer system that is newly proposed. For the teleoperated robot soccer system, we made mapping functions to control a 2-wheeled mobile robot using a 2 DoF stickcontroller. The simulation with a real stickcontroller has been evaluated the performance of the proposed mapping function. Then, the basic cooperation strategy has been tested between teleoperated robot and autonomous robot It is shown that the multi-agent system for teleoperation can have a good performance for a job Like a scoring a goal

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1836-1840
• /
• 2005

This work proposes a controller tuning method of a Hyundai 8608 robot in order to improve its performance. For this, we analyzed the control structure of the robot, and the functions of all the adjustable parameters in the robot controller with a reference 'NACHI Technical Report'. Through the analysis, we found out that 3 important parameters(VRRL, VRF, VRGIN) act like a conventional PID gains and other parameters are closely related to these 3 parameters. Conclusively, parameter tuning of these 3 parameters is enough in most cases of applications with other parameters fixed. The conventional PID tuning is performed to each joint of the test robot with Robot Performance Evaluation System(shown in our companion paper) so that the acceptable gain ranges for each joint are determined and then the robot performance tests are repeatedly done with the combination of the acceptable gains. Finally, the best combination is selected for its best performance. For the effectiveness of the proposed method, it was implemented on a Hyundai 8608 robot and its results are compared with the results of NACHI's Semi-Auto Tuning Method and the results which are done by a tuning expert with his eyes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.377-378
• /
• 2013

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.1-10
• /
• 2004

A web robot is a software that has abilities of tracking and collecting web documents on the Internet(l), The performance scalability of recent web robots reached the limit CIS the number of web documents on the internet has increased sharply as the rapid growth of the Internet continues, Accordingly, it is strongly demanded to study on the performance scalability in searching and collecting documents on the web. 'Design of web robot based on Multi-Agent to speed up documents collection ' rather than 'Sequentially executing Web Robot based on the existing Fork-Join method' and the results of analysis on its performance scalability is presented in the thesis, For collection speedup, a Multi-Agent based web robot performs the independent process for inactive URL ('Dead-links' URL), which is caused by overloaded web documents, temporary network or web-server disturbance, after dividing them into each agent. The agents consist of four component; Loader, Extractor, Active URL Scanner and inactive URL Scanner. The thesis models a Multi-Agent based web robot based on 'Amdahl's Law' to speed up documents collection, introduces a numerical formula for collection speedup, and verifies its performance improvement by comparing data from the formula with data from experiments based on the formula. Moreover, 'Dynamic URL Partition algorithm' is introduced and realized to minimize the workload of the web server by maximizing a interval of the web server which can be a collection target.

• Advances in robotics research
• /
• v.2 no.1
• /
• pp.13-31
• /
• 2018

This paper presents the performance of Teaching-Learning-Based Optimization (TLBO) algorithm for optimum static balancing of a robot manipulator. Static balancing of robot manipulator is an important aspect of the overall robot performance and the most demanding process in any robot system to match the need for the production requirements. The average force on the gripper in the working area is considered as an objective function. Length of the links, angle between them and stiffness of springs are considered as the design variables. Three robot manipulator configurations are optimized. The results show the better or competitive performance of the TLBO algorithm over the other optimization algorithms considered by the previous researchers.