• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.260-265
• /
• 1992

This paper presents an adaptive control scheme for flexible joint robot manipulators. This control scheme is based on the Lyapunov direct method with the arm energy-based Lyapunov function. The proposed adaptive control scheme uses only the position and velocity feedback of link and motor shaft. The adaptive control system of flexible joint robots is asymptotically stable regardless of the joint flexibility value. Therefore, the assumption of weak joint ealsticity is not needed. Also, joint flexibility value is unknown. Simulation results are presented to show the feasibility of the proposed adaptive control scheme.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.184-191
• /
• 2009

The common requirements of rough terrain mobile robots are long-term operation and high mobility in rough terrain to perform difficult tasks. In rough terrain, excessive wheel slip could cause an increase in the amount of dissipated energy at the contact point between the wheel and ground or, even more seriously, the robot could lose all mobility and become trapped. This paper proposes a traction control algorithm that can be independently implemented to each wheel without requiring extra sensors and devices compared with standard velocity control methods. The proposed traction algorithm is analogous to the stick-slip friction mechanism. The algorithm estimates the slippage of wheels by angular acceleration change, and controls the increase or decrease state of torque applied to wheels Simulations are performed to validate the algorithm. The proposed traction control algorithm yielded a 65.4% reduction of total slip distance and 70.6% reduction of power consumption compared with the standard velocity control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.172-178
• /
• 1993

This paper deals with the modeling and experiment of a robot system for force/impact control performance. The basic model is composed of a direct drive motor, servo amplifier, link, force sensor and environments. Based on the developed model, the stability of the whole system was analyzed via root locus method. For the force control, integral force compensation with velocity feedback method shows the best performance of all the explicit force control strategies. In dealing with impact, PID position control and the explicit force control method were implemented. Instead of add more damping to the robot system by velocity feedback, we developed a new passive damping method and it was also applied to enhance the damping characteristic of the system.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1193-1199
• /
• 2014

서비스 로봇이 충돌안전성을 확보한 상태에서 고속 주행 임무를 수행하기 위해서는 동적 장애물의 속도를 고려한 궤적 계획이 필요하다. 정적 장애물만을 고려한 상태에서 궤적을 계획하는 경우 장애물과의 상대속도로 인해서 로봇이 장애물과 충돌할 수 있다. 본 연구에서는 동적 장애물의 속도를 고려한 궤적시간조정기법을 제안한다. 제안된 기법을 통해서 기존에 생성된 궤적의 시간을 조정해서 장애물 회피가 가능한지를 평가할 수 있다. 만일 회피가 불가능할 경우 생성된 경로가 아닌 다른 경로를 선택할 수 있다. 모의 시험 결과를 통해서 제안된 기법을 통해서 짧은 시간 내에 장애물 회피를 수행할 수 있음을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.315-317
• /
• 2006

In addition to accurate position and velocity control, force control is necessary for a successful robot operation. In this paper, we have designed a simple robot gripper using a DC motor. For its force control, a current feedback control law is presented without using additional force sensors. Experimental results prove the effectiveness of the proposed control law. A digital controller is also developed with a TMS320LF2406 processor.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.165-173
• /
• 1995

In order to eliminate position errors existing at the steady state in the motion control of robotic maniprlators, a new fuzzy control algorithm is proposed using three variables, position error, velocity error and integral of position errors as input variables of the fuzzy controller, This controller is applied to the tracking control of robotic manipulators in Cartesian space. Three dimensional look-up table is used to reduce the computational time in rel-time control. Simulation and experimental studies are conducted to evaluate the control performance for the two axis direct drive SCARA robot system.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1130-1136
• /
• 2009

A new control algorithm for the yaw motion control of a unicycle robot has been proposed in this paper. With the increase of life quality, there are various transportation systems such as segway and unicycle robot which provide not only transportation but also amusement. In most of the unicycle robots share the same technology in that the directions of roll and pitch are controlled by the balance controllers, allowing the robots to maintain balance for a long period by continuously moving forward and backward. However, one disadvantage of this technology is that it cannot provide the capability to the robots to avoid obstacles in their path way. This research focuses to provide the yawing function to the unicycle robot and to control the yaw motion to avoid the obstacles as desired. For the control of yawing motion, the yaw angle is adjusted to the inertia generated by the velocity and torque of a yawing motor which is installed in the center axes of the unicycle robot to keep the lateral control simple. Through the real experiments, the effective and robustness of the yawing control algorithm has been demonstrated.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.907-913
• /
• 2004

일반적인 이동 로봇의 주된 관심은 경로 생성과 생성된 경로 추종에 있다. 그러나 일부 고속의 이동성이 필요로 하는 로봇의 경우 동역학적 제한 조건이 존재하며, 이러한 제한 조건 내에서 원하는 움직임에 대한 제어가 요구된다. 된 논문에서 환경 지도를 가지고 있지 않은 상태, 즉 미지의 환경에서 이동 로봇의 경로 추종에 있어서 빠른 이동시에 발생할 수 있는 이동 로봇의 미끄러짐이나 전복 현상을 막기 위해 이동 로봇의 동역학적 제한 조건을 퍼지 논리를 이용하여 기준 속도를 변화시켜 안전하고 빠는 경로 추종 성능을 얻고자 하였다. 특히, 라인 추종 이동 로봇을 모델링하여 실시간으로 변화하는 목표점에 대한 추종 제어기를 설계하고 퍼지 최적 속도 제한 제어기를 통해 연속적으로 변화하는 라인에 대해서 지능적으로 로봇의 속도를 제한하여 안정적인 추종 성능을 발휘함을 확인하였다.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.256-262
• /
• 2013

This paper presents a linear path control algorithm for NeuroMate robot in a skull drilling system. For the path control inverse kinematics of the robot is analyzed and a linear interpolation algorithm is presented. A geometric approach is used for solving inverse kinematic equations for the robot. Four feasible solutions are found through the approach. The approach gives geometric insights for selecting the best solution from the feasible solutions. The presented linear interpolation algorithm computes a next position considering current velocity and remaining distance to the target position. Presented algorithm is implemented and tested in a skull drilling system.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.190-199
• /
• 1993

In this study a three-axes mobile robot which has two independently controlled driving wheels and a function of simultaneously steering the driving wheels has been developed. Two-motion modes of the mobile robot, the first is a differential velocity motion of two driving wheels and the second is a equal driving and steering motion, have been analyzed and the kinematic and dymanic analyses about the each motion mode have been carried out. As a result of dynamic analysis, the torque used on a motor control and acceleration have been derived explicitly. Hence, a computation time is saved effectively and a real time control of the mobile robot considering the dynamics has become possible. Through a simulation the results considering the dynamics have been compared with that no regarding the dynamics and the possibility of real-time control has been proved.