• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.220-227
• /
• 1999

The position control accuracy of a robot arm is significantly deteriorated when a long slender arm robot is operated at a high speed. In this case, the robot arm needs to be modeled as a flexible structure, not a rigid one, and its control system needs to be designed with its elastic modes taken into account. In this paper, the vibration control scheme of a one-link flexible manipulator using adaptive input shaper in conjunction with PID controller is presented. The robot consists of a flexible arm manufactured with a thin aluminium plate, an AC servo motor with a harmonic drive for speed reduction, an optical encoder and an accelerometer. On-line identification of the vibration mode is done using the pruned decimation-in-time FFT algorithm to estimate the parameter of the input shaper. Experimental results of the flexible manipulator with a PID controller and input shaper are provided to show the effectiveness of the advocated controllers.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.81-92
• /
• 1989

This paper presents a simple identification method of the actual kinematic parameters for the robot with parallel joints. It is known that Denavit-Hartenberg's coordinate system is not useful for nearly parallel joints. In this paper, the coordinate frames are reassigned to model the kinematic parameter between nearly parallel joints by four parameters. The proposed identification method uses a straight ruler about 1m long. A robot hand is placed by using a teaching pendant at the prescribed points on the ruler, and corresponding error function is defined. The identified kinematic parameters which make the error function zero are obtained by iterative least square error method based on the singular value decomposition. In the compensation of joint angles, only the position is considered because the usual applications of robot do not require a precise orientation control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.355-358
• /
• 1993

This paper introduces what calibration is and how it is operated. The steps of calibration methods are discussed, which are modeling, measurement, parameter identification and compensation. Using modified D-H model, a new algorithm for parameter identification is developed. This algorithm is very simple and applicable to off-line robot simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.932-938
• /
• 1987

The dynamic equations of robotic manipulators can be derived from either Newton-Euler equation or Lagrangian equation. Model parameters which appear in the resulting dynamic equation are the nonlinear functions of both the inertial parameters and the geometric parameters of robotic manipulators. The identification of the model parameters is important for advanced robot control. In the previous methods for the identification of the model parameters, the geometric parameters are required to be predetermined, or the robotic manipulators are required to follow some special motions. In this paper, we propose an approach to the identification of the model parameters, in which prior knowledge of the geometric parameters is not necessary. We show that the estimation equation for the model parameters can be formulated in an upper block triangular form. Utilizing the special structures, we obtain a simplified least-square estimation algorithm for the model parameter identification. To illustrate the practical use of our method, a 4DOF SCARA robot is examined.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.158-162
• /
• 2006

This paper presents a speaker recognition system intended for use in human-robot interaction. The proposed speaker recognition system can achieve significantly high performance in the Ubiquitous Robot Companion (URC) environment. The URC concept is a scenario in which a robot is connected to a server through a broadband connection allowing functions to be performed on the server side, thereby minimizing the stand-alone function significantly and reducing the robot client cost. Instead of giving a robot (client) on-board cognitive capabilities, the sensing and processing work are outsourced to a central computer (server) connected to the high-speed Internet, with only the moving capability provided by the robot. Our aim is to enhance human-robot interaction by increasing the performance of speaker recognition with multiple microphones on the robot side in adverse distant-talking environments. Our speaker recognizer provides the URC project with a basic interface for human-robot interaction.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.703-709
• /
• 2015

In this work, a robot aimed at grapping and delivering an object by using a simple finger-pointing command from a hand- or arm-handicapped person is introduced. In this robot system, a Leap Motion sensor is utilized to obtain the finger-motion data of the user. In addition, a Kinect sensor is also used to measure the 3D (Three Dimensional)-position information of the desired object. Once the object is pointed at through the finger pointing of the handicapped user, the exact 3D information of the object is determined using an image processing technique and a coordinate transformation between the Leap Motion and Kinect sensors. It was found that the information obtained is transmitted to the robot controller, and that the robot eventually grabs the target and delivers it to the handicapped person successfully.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.820-829
• /
• 1993

We have developed an agricultural hydraulic robot to operate in the agricultural field. Using the robot, automatic harvesting experiments of watermelon were done. The results are as follows. First, the gripper should be modified its finger. Second, the manipulator and the gripper should be known precisely about dynamic characteristics of them in order to control adequately. Therefore, a new gripper was manufactured on trial by modifying its finger, and in order to known dynamic characteristics of the manipulator and the new gripper, the system identification was carried out with experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.892-896
• /
• 2005

This paper presents method of depriving the relationship between static passive RFID tag and mobile robot In the field of tag-range. We use probabilistic sensor model of RFID reader by experiments. And we proposed estimation techniques by using direction of identification and relative-distance from the sensor model. Corresponding to distribution of identification, we can correct estimated tag position in relative coordinate. Simulation and Experimental Results show that the proposed method can provide good performance and thus be used fer mobile-robot localization.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.160-168
• /
• 1997

A $H_{\infty}$self-tuning control scheme for the tip position of a flexible link robot handling unknown loads is presented here. The scheme essentially comprises a recursive least-squares identification algorithm and $H_{\infty}$self-tunning controller. The $H_{\infty}$control low is designed to be robust to uncertain parameters and the self-tunning action provides adaption to unknown parameters. Through numerical study, the performance comparison of the $H_{\infty}$self-tuning controller with a constant gain $H_{\infty}$controller as well as a LQG self-tuning controller clearly shows its superior ability in handling load changes in quiescent states.nt states.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.239-244
• /
• 2010

This paper is to present map building of mobile robot using RFID (Radio Frequency Identification) technology and ultrasonic sensor. For mobile robot to perform map building, the mobile robot needs its localization and accurate driving in space. In this reason, firstly, kinematic modeling of mobile robot under non-holonomic constrains is introduced. Secondly, based on this modeling, a tracking controller is designed for tracking a given path based on backstepping method using Lyapunov function. The Lyapunov function is also introduced for proving the stability of the designed tracking controller. Thirdly, 2D map building is performed by RFID system, mobile robot system and ultrasonic sensors. The RFID mobile robot system is composed of DC motor, encoder, ultra sonic sensor, digital compass, RFID receiver and RFID antenna. Finally, the path tracking simulation results and map building experimental results are presented to show the effectiveness of the designed controller.