• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.55-61
• /
• 2003

Control of multi-link robot arms is a challenging and difficult problem because of the highly nonlinear dynamics. Independent joint adaptive scheme is developed for control of robot manipulators based on Sugeno-type of fuzzy logic. Fuzzy logic system is used to approximate the coupling forces among the joints, coriolis force, centrifugal force, gravitational force, and frictional forces. The proposed scheme does not require an accurate manipulator dynamic, and it is proved that closed-loop system is asymptotic stable despite the gross robot parameter variations. Numerical simulations for three-axis PUMA robot are included to show the effectiveness of controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1519-1522
• /
• 1996

In this paper, we have developed a tele-robotic system for nozzle dam installation/removal works and tube relating maintenance works inside unclear power plant steam generator. Developed tele-robotic system consists of many hardwares including robot and a control system. Based on the 3 dimensional graphic simulation, a 6 D.O.F. hydraulic actuated robot and a 2 D.O.F. robot install/removal device have been developed. And also we deviced special tools for nozzle dam carry and bolting. For the tele-robot and other devices to be controlled at the nonradioactive area outside reactor containment building, we developed a tele-robot control system consisting of supervisory controller and remote controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.315-316
• /
• 2006

A new cleaning robot system for live-line tension insulator string was developed to prevent an insulator failure, which can have severe effects on national security as well as national industry and economy. The robot moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water or water/air, the robot system adopts dry cleaning method using a rotating brush and a circular motion guide. This robot system has control architecture consisting of a master control unit and two slave control units. We confirmed its effectiveness through experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1917-1920
• /
• 2003

Automatic tracking of a moving object such as a person is a demanding technique especially in surveillance. This paper describes an experimental system for tracking a moving object on the ground by using a visually controlled aerial robot. A blimp is used as the aerial robot in the proposed system because of its locality in motion and its silent nature. The developed blimp is equipped with a camera for taking downward images and four rotors for controlling the progression. Once a camera takes an image of a specified moving object on the ground, the blimp is controlled so that it follows the object by the employment of the visual information. Experimental results show satisfactory performance of the system. Advantages of the present system include that images from the air often enable us to avoid occlusion among objects on the ground and that blimp’s progression is much less restricted in the air than, e.g., a mobile robot running on the ground.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.400-400
• /
• 2000

This paper purposed that verify the validity of Petri Net method for control progressive increase of system complexity, before extend the realized single robot system to multi-robot system. An autonomous mobile robot(AMR) needs decision making, motion control, path planning, tracking a path, obstacle avoidance, and sensor fusion, to complete its task. An AMR integrates and operates these technics through a consistent command system. An error in a command hierarchy which is like duplication or omission of a control command hierarchy for each module results in serious problems. This paper minimizes the error by modeling each module and whole system using Petri Net graphical representation and applies it to the exploration task of an AMR

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.908-911
• /
• 2004

There are various researches on mobile robot systems. Connection method between server and client of mobile robot system is one of them. In the case of mobile robot system, when connection method between server and client is wireless than wire, applications may be expanded. Also in remote monitoring environment using mobile robot system, we are interested in an effective transmission of the image information between server and client. In this paper, Bluetooth is used for connection method between server and client. One of the major applications of Bluetooth is the cable replacement for mobile and peripheral devices. Using Bluetooth, we propose the control method of mobile robot system. Bluetooth offers fast and reliable transmissions of both voice and data over the globally available 2.4GHz ISM (Industrial, Scientific and Medical) band. It has the advantage of small size, low power and low cost. It has the disadvantage of limited range and limited bandwidth. Also in order to transfer effectively image information between remote site(server) and mobile robot system(client) using Bluetooth, we applied to MPEG-2 and MPEG-4 image compression techniques and the results are compared with each other.

• 한국산업융합학회 논문집
• /
• 제27권4_1호
• /
• pp.753-758
• /
• 2024

Trajectory tracking of the AMR robot is one research for the AMR robot navigation. For the control system of the Autonomous mobile robot(AMR) being in non-honolomic system and the complex relations among the control parameters, it is d ifficult to solve the problem based on traditional mathematics model. In this paper, we presents a simple and effective way of implementing an adaptive tracking controller based on the PID for AMR robot trajectory tracking. The method uses a non-linear model of AMR robot kinematics and thus allows an accurate prediction of the future trajectories. The proposed controller has a parallel structure that consists of PID controller with a fixed gain. The control law is constructed on the basis of Lyapunov stability theory. Computer simulation for a differentially driven non-holonomic AMR robot is carried out in the velocity and orientation tracking control of the non-holonomic AMR. The simulation results of wheel type AMR robot platform show that the proposed controller is more robust than the conventional back-stepping controller to show the effectiveness of the proposed algorithm.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.30-36
• /
• 2017

In robot industries, the request to obtain a high efficiency and accurately controlled electric actuator has been growing. Nevertheless, the effectiveness of electric actuators is significantly affected by the presence of factors such as nonlinearity, uncertain disturbance and unknown dynamics. Therefore, it makes difficult to derive an exact mathematical model of the controlled system. In this paper, a new method for easily recognizing and regenerating robot motions used in small size industries such as painting and welding parts is proposed. Instead of modeling the entire dynamic motion of the robot system, this method is based on the procedure of modeling and controller design for every arm individually. The proposed method does not require complex model and control system such that it gives easy working process to the small size industries. Based on this fact, in this research, the model and PID controller for every arm of the 3 DOF robot system are obtained separately. Some experimental results are implemented to validate the effectiveness of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.887-893
• /
• 2009

In this paper, a mask-panel alignment robot system is considered for IT industry applications. Two kinds of solutions are suggested which are required in constructing a control system for the alignment robot with actuation redundancy. First, the kinematic solution for the 4PPR parallel positioning mechanism is formulated for an arbitrary initial posture, which relates the mask-panel misalignment in the task space and the desired actuator displacements in the joint space. Secondly, in order to increase the stiffness of the control motion and also to avoid the mechanical lock which may happen due to the redundant actuation, a new synchronous control method is proposed which has the merit of coordinating joint control motions while not losing individual joint control performance. In addition, the engineering process to develop a visual alignment robot system is described with the results of experimental setup and GUI software. Finally, the experimental results demonstrate the effectiveness of the proposed alignment system control methodology and how much beneficial it will be in real industrial applications.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.391-398
• /
• 2013

선체 청소를 통해 선박에서 소비되는 연료량을 감소시킬 수 있으며 최근에는 이러한 작업을 산업용 로봇을 사용하여 수행한다. 선체를 청소하는 로봇에 있어서 안정적으로 선체에 부착되어 주행하는 것이 가장 중요하므로 본 연구에서는 안정적으로 선체 청소로봇을 구동할 수 있는 주행 제어시스템을 개발하였다. 이와 더불어 보다 편리하게 로봇을 운용할 수 있도록 주행 제어시스템에 작업자의 편의를 반영하여 주행 제어시스템을 구성하였다. 개발된 주행 제어시스템의 주행 제어성능과 편의성은 선체와 동일하게 제작된 구조물에서 실험을 통해 입증하였다.