• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.537-550
• /
• 2021

There are various technical problems need to be solved in the construction process of pre-setting an isolation wall into a double lane in the outburst prone mine. This study presents a methodology that pre-setting an isolation wall into a double lane without a coal pillar. This requires the excavation of two small section roadways to dig a wide section roadway, followed by construction of the separation wall. During this process the connecting lane is reserved. In order to ensure the stability of the separation wall, the required bearing capacity of the isolation wall is 4.66 MN/m and the deformation of the isolation wall is approximately 25 cm. To reduce the difficulty of implementing support the roadway is driven by 5 m/d. After the construction of the separation wall, the left side coal wall is brushed 1.5 m to make the width of the gas roadway reach 2.5 m and the roadway support utilizes anchor rod, ladder beam, anchor cable beam and net configuration. During construction, the concrete pump and removable self-propelled hydraulic wall mold are used to pump and pour the concrete of the isolation wall. In the process of mining, the stress distribution of coal body and isolation wall is detected and measured on site. The results demonstrate that the deformation of the surrounding rock of roadway and separation of roof in the roadway is small. The stress of the bolt and anchor cable is within equipment tolerance validating their selection. The roadway is well supported and the intended goal is achieved. The methodology can be used for reference for similar mine gas control.

• Geomechanics and Engineering
• /
• v.29 no.5
• /
• pp.567-582
• /
• 2022

In the present study, a series of physical experiments and numerical simulations were conducted to investigate the effects of mode I and mixed-mode I/II cracks on the fracture modes and stability of roadway tunnel models. The experiments and simulations incorporated different inclination angle flaws under both static and dynamic loads. The quasi-static and dynamic testing were conducted by using an electro-hydraulic servo control device and drop weight impact system (DWIS), and the failure process was simulated by using rock failure process analysis (RFPA) and AUTODYN software. The stress intensity factor was also calculated to evaluate the stability of the flawed roadway tunnel models by using ABAQUS software. According to comparisons between the test and numerical results, it is observed that for flawed roadways with a single radical crack and inclination angle of 45°, the static and dynamic stability are the lowest relative to other angles of fractured rock masses. For mixed-mode I/II cracks in flawed roadway tunnel models under dynamic loading, a wing crack is produced and the pre-existing cracks increase the stress concentration factor in the right part of the specimen, but this factor will not be larger than the maximum principal stress region in the roadway tunnel models. Additionally, damage to the sidewalls will be involved in the flawed roadway tunnel models under static loads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.473-481
• /
• 2009

This research developed integrated service assessment index on satisfaction with road use in consideration of not only quantitative parts, such as the existing traffic speed and delay but also qualitative parts, such as traffic information and traffic safety, etc. The newly devised assessment index developed assessment items and weight using ANP analysis method through the existing research results and questionnaire survey on traffic experts and road users. To verify the developed assessment index, this research measured the feeling degree of road users in time of their driving and analyzed the reasons using the brain waves tester; as an analysis result, the speed shown in the existing assessment index was found to have a 35% effect and further, the factors, such as traffic safety and traffic information were also found to have a lot of effects on the road $users^{\circ}{\emptyset}$ feeling degree. Accordingly, the integrated assessment index suggested by this research has its significance in that it is available to assessment in view of users rather than the existing satisfaction with the service in road use, and this index was developed to reflect the needs of the times, such as a fine view of roads, traffic information, and traffic safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2C
• /
• pp.77-84
• /
• 2010

In planning underground roadway foundation on soft ground, deep cement mixing method (DCM) is employed. The proper mixing ratio using batch test and replacement rates that meet strength criteria are used for deep cement mixing column. Stiffness ratio and distance between deep cement mixing columns (C.T.C) are varied to find out influences on stress, displacement, and differential settlement. The replacement ratios that meet settlement criteria are 10~35%. As stiffness varies, stress reaches at 769.kPa that exceed criteria due to stress concentration when stiffness ratio difference is over 30. Also, when C.T.C is 5 m, stress spreads to soils, so C.T.C need to be considered carefully. The vertical displacement is 0.6~1.56 cm, and angular distortion is 1/909~1/510.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.14-20
• /
• 2024

Traffic sign recognition is an essential feature of intelligent transportation systems and Advanced Driver Assistance Systems (ADAS), which are necessary for improving road safety and advancing the development of autonomous cars. This research investigates the incorporation of the YOLOv9 model into traffic sign recognition systems, utilizing its sophisticated functionalities such as Programmable Gradient Information (PGI) and Generalized Efficient Layer Aggregation Network (GELAN) to tackle enduring difficulties in object detection. We employed a publically accessible dataset obtained from Roboflow, which consisted of 3130 images classified into five distinct categories: speed_40, speed_60, stop, green, and red. The dataset was separated into training (68%), validation (21%), and testing (12%) subsets in a methodical manner to ensure a thorough examination. Our comprehensive trials have shown that YOLOv9 obtains a mean Average Precision (mAP@0.5) of 0.959, suggesting exceptional precision and recall for the majority of traffic sign classes. However, there is still potential for improvement specifically in the red traffic sign class. An analysis was conducted on the distribution of instances among different traffic sign categories and the differences in size within the dataset. This analysis aimed to guarantee that the model would perform well in real-world circumstances. The findings validate that YOLOv9 substantially improves the precision and dependability of traffic sign identification, establishing it as a dependable option for implementation in intelligent transportation systems and ADAS. The incorporation of YOLOv9 in real-world traffic sign recognition and classification tasks demonstrates its promise in making roadways safer and more efficient.

• The Journal of Bigdata
• /
• v.8 no.2
• /
• pp.45-54
• /
• 2023

Seoul's public bicycle system, 'Ttareungyi,' introduced in 2015, has achieved an annual ridership of 40 million in 2022. Similarly, electric scooters, a type of personal mobility device, surpassed one million riders in 2020 due to various sharing platforms. However, the major roadways for these new transportation, bicycle lanes, are notably insufficient compared to other forms of transport. Hence, this study proposes an optimal location selection method for bicycle lanes in Seoul to prevent accidents and enhance bicycle ride safety. The location selection process prioritizes road safety concerning bicycle accident risk. Using regression models, high-risk areas for bicycle accidents are identified. Cluster analysis categorizes these areas into six clusters, each suggesting suitable types of bicycle lanes based on cluster-specific characteristics. We hope that this study will contribute to the improvement of Seoul's transportation environment, including the expansion of dedicated bicycle lanes and lanes for personal mobility devices.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.23-34
• /
• 2012

This Study is about the "Comprehensive Landscape Improvement Plan for Gu-ryoung Seaside Village that was one of most exhibited projects for developing sea villages." The formulations of the plan were supervised by the Ministry of Land, Transport, and Maritime Affairs and were executed by the Goheung Country. Rather than proposing renovations for the landscape, this study maintains the existing order and attempts to examine the plan by scrutinizing the vernacular design language of the landscape. In the study, community members had the opportunity to express their opinions and ideas about the community through workshops composed of community participation programs, and participated in the decision-making process through consultation meetings. The conclusion of this study was relevant to the activities of the committee on landscape improvement. The Comprehensive Landscape Improvement Plan has three objectives: (1) resorting and modifying the natural landscape, (2) restructuring the roadways, and (3) modifying key spaces. In the end, the role of Gu-ryong Mountain as a background of the landscape was focused on tree planting drives that were undertaken, and accessibility to the sea front was improved. Second, in restructuring the roadways, rough roads were restored and unconnected roads were connected to ensure a network of roads along the sea front, inner roads in the village, roads at the Fringes Mountains, and stone roads on the mud flat. In addition, roads were named according to the character of the landscape and signs were installed. Finally, the existing key spaces, in which community members came together, were restored and new key spaces were created for the outdoor activities of the inhabitants and the diverse experience of visitors. A guideline was also created to regulate private areas such as roofs, walls, fences of residential buildings, and private container boxes and fishing gear along the sea front. The strength of this study is that it is seeking to determine the greatest potential of the landscape and set the plan by examining the lives of community members. Some problems were found during the development of this study. Further, there were problems in the community's understanding as elaborated below. First is the gap between community members' awareness and practice. Even though they were aware of the problems with the village landscape, they hesitated to implement improvements. Second, community members have misunderstandings about the landscape the improvement plan. The local government and the residents have understood this plan as a development project; for example, new building construction or the extension of roads. Third, residents are not aware that continuous attention and improvements are required for the upkeep of the landscape in the sea village. The plan to improve the landscape should promote a balance between making the area as a tourist attraction and maintaining the lives and cultural activities, because the sea village system incorporates settlements, economy, and culture.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.1-17
• /
• 2018

Over the past five years (2010-2014), the total number of traffic accidents has decreased from 226,878 to 223,552 with decrease of 0.37 percent each year. The death toll has also decreased from 5,505 to 4,762. However, the number of rental car accidents and fatalities has been steadily increased. Despite of its growth, no previous study has been conducted on rental car accident severity. This study analyzed data of 18,050 rental car accidents in South Korea collected from 2010 to 2014 and then processed in order to identify which factors could affect the accident severity. Seventeen factors related to rental car accident severity were grouped into four categories: driver, vehicle, roadways and environment. As a result of the ordered probit model analysis, fourteen variables excluding age, intersection, and day of week were found to affect the severity of rental car accidents. The results of the study summarized as follows. First of all, violation of traffic regulations such as speeding increase the severity of rental car accidents. Secondly, rental accident severity is higher at curved sections of complicated roadway, which the driver's field of view is impaired. The results of this study can be used to reduce the severity of rental car accidents in transportation safety.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.59-69
• /
• 1999

A Freeway corridor is a network consisting of a few Primary longitudinal roadways (freeway or major arterial) carrying a major traffic movement with interconnecting roads which offer the motorist alternative paths to his/her destination. Control measures introduced to ameliorate traffic performance in freeway corridors typically include ramp metering at the freeway entrances, and signal control at each intersections. During a severe freeway incident, on-ramp metering usually is not adequate to relieve congestion effectively. Diverting some traffic to the Parallel surface street to make full use of available corridor capacity will be necessary. This is the purpose of the traffic management system. So, an integrated traffic control scheme should include three elements. (a)on-ramp metering, (b)off-ramp diversion and (c)signal timing at surface street intersections. The purpose of this study is to develop an integrated optimal control model in a freeway corridor. By approximating the flow-density relation with a two-segment linear function. the nonlinear optimal control problem can be simplified into a set of Piecewise linear programming models. The formulated optimal-control Problem can be solved in real time using common linear program. In this study, program MPL(ver 4.0) is used to solve the formulated optimal-control problem. Simulation results with TSIS(ver 4.01) for a sample network have demonstrated the merits of the Proposed model and a1gorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.26-33
• /
• 2007

Social cost has been increased by traffic accident and congestion since early 1990s. The construction of roadways and railways has been suggested as countermeasures. However, ITS has finally introduced as a logical solution because the expenses of infrastructures are costly. The data collection field has developed through numerous researches and pilot projects. However the information provision field does need a lot of study. The traffic information broadcasting whether simple traffic information or the value-added information has been available via radio, television and internet which does not require tremendous investment compared with data collection stage. Therefore, this study reviews the suitability of the gadget service usually offered by window vista users which is the result of the development of technology and the changes of internet environment. It also suggests to using the RSS(Really Simple Syndication) manner as a basic method to provide the traffic information based on the needs of user in order to enhance the usability of traffic information. For this, this study analyzes the current methods and techniques of traffic information service which is widely available by local governments and companies and suggest possible changes and methods in order to provide Gadget-based service to the public.