• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.151-155
• /
• 1998

In this paper it is examined the validity of luminance-to-illuminance conversion factor in the roadway lighting design. Luminance and illuminance distribution patterns were measured to yield the calculated conversion factor on the newly-constructed highway, and this value was compared to the conversion factor commonly used. We found that some discrepancy might exist between them due to difference in the values between the luminance yield factor and the coefficient of utilization. Therefore this fact must be fully understood in the roadway lighting design process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1723-1726
• /
• 2003

Clean and well maintained roadway signs are important for preserving driver's safety. The existing signs on the roadway must be periodically re-painted in order to maintain clean state. However, current sign painting operations are manually performed now. These are very slow and workers are exposed to very dangerous and hazard working environment. In this paper, we present the method for automating this job with gantry robot and spray system. In addition, we suggest two design concepts to resolve the problem that it is impractical to make the gantry system so big as to cover whole lane width. In order to show the validity of this system, the painting operation is simulated and experimentally executed.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.295-301
• /
• 2001

For the seismic analysis of typical roadway bridges provisions are given in most codes for analysis models, which describes however only fundamental modelling methods according to the basic theories of structural dynamics. In practice even conventional non-seismic analysis models, separate super- and substructure models, are applied, which are not adequate because of neglecting connection elements. In this study three typical roadway bridges, a Steel box bridge, a PC beam bridge and a PC box bridge are selected and simple models integrating super- and substructure as well as connection elements are given. The simple models are composed with frame elements with lumped masses representing stiffness and mass characteristics of the selected bridges. To check the properness of the simple models, analysis results with the simple models are compared with those obtained with detailed models in view of bridge failure mechanisms. It is proved that the simple models can be used in the preliminary design phase fur the determination of failure mechanisms of typical roadway bridges.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.376-380
• /
• 2015

Life-Cycle Cost Analysis (LCCA) for highway projects is known as an effective analytical technique that uses economic principles to evaluate long-term alternative investment options, especially for comparing the values of alternative pavement design structures and construction strategies. In the Unites States, the 2012 Moving Ahead for Progress in the 21^st Century Act (MAP-21) amended the United States Code to mandate that the United States Government Accountability Office (GOA) conducts a study of the best practices for calculating life-cycle costs and benefits for the federally funded highway projects in 2013. The RealCost 2.5CA program was developed and adapted as an official LCCA tool to comply with regulatory requirements for California state highway projects in 2013. Utilization of this California-customized LCCA software helps Caltrans to achieve substantial economic benefits (agency cost and road user cost savings) for highway projects. Proper implementation of LCCA for roadway construction and rehabilitation would deliver noticeable savings of agency's roadway maintenance cost especially in developing counties where financial difficulties exist.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.43-50
• /
• 1993

It has been past for many years that soil-cement used in the field of roadway pavement in America and Europe. Though the design and construction criteria on soil-cement pavement have been well setablished in Korea's specificaions, this method has not been applied in roadway pavements, in practices. It is mainly caused by the lacks of experiences in soil-cement pavement design and construction. In this study, the problems of soil-cement pavement in use were explored, and the structure and fatigue like of soil-cement bases and subbases were estimated.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1528-1533
• /
• 2009

Infrastructure is provided to the user through long-term project period and large-scale working expenses. Existing facilities are getting old as time goes by. Accordingly, proper maintenance is required and generally more maintenance cost than initial invested cost is needed during life cycle. Therefore, a specific plan that just increases the value of facilities is required by evaluating performance of facilities and inputting minimum maintenance cost. Value engineering that increases the value of object by systemically analyzing Life Cycle Costs and function is actively promoted at the design phase of construction. These efforts can increase the performance of facilities at the maintenance phase of infrastructure. This study is to search how to evaluate the performance of Roadway by utilizing function analysis, as a core part of VE in the maintenance phase. In order to this a new evaluation criteria were proposed by adding an evaluation items to the existing criteria through the research of old documents, status of roadway maintenance and function analysis of VE. The results of this study may promote the effective performance evaluation to determine a resolution of roadway congestion in future. A succeeding study using the proposed evaluation criteria will be required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1619-1629
• /
• 2013

It turned out that there was a direct or an indirect relationship among global warming, urban heat island effects, urban and traffic environments, and public's health. In particular, unusual climate phenomena such as frequent heavy rainfall and scorching heat in a row that had rarely happened before have a negative effect on quality of life for people living in urban areas. This study focuses on the effects of roadway geometric design and traffic conditions on air temperature of roadside in Seoul Metropolitan Areas, controlling of roadway micro-climate environment. Five roadway segments containing different roadway and traffic conditions in terms of traffic median with trees, street trees, traffic volume and average travel speeds were surveyed. According to statistical results(t-test) from three roadway air temperature regression model estimations, air temperature is found to be different from one another in three periods-morning, afternoon and evening. Regarding roadway geometric design, air temperature of urban roads with vegetated median strips is lower about 1.3~2.2 degrees in celcius. Higher traffic volumes per lane and lower average travel speeds will tend to increase roadside air temperature, and efficient traffic operation policies can protect from increasing roadside air temperature in urban areas.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.185-189
• /
• 2017

The purpose of earthquake resistant design for typical bridges is the 'No Collapse Design' allowing emergency vehicles just after earthquakes. The Roadway Bridge Design Code provides design provisions to carry out such 'No Collapse Design' with a ductile mechanism and response modification factors given for connections and substructure play key role in this procedure. In case of response modification factors for substructure, the Roadway Bridge Design Code provides values considering ductility and redundancy. On the other hand, 'AASHTO LRFD Bridge Design Specifications' provides values considering additionally an artificial factor according to the bridge importance categories divided into critical, essential and others. In this study, a typical bridge with steel bearing connections and reinforced concrete piers is selected and different response modification factors for substructure are applied with design conditions given in the Roadway Bridge Design Code. Based on the comparison study of the design results, supplementary measures are suggested required by applying different response modification factors for substructure.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.1-6
• /
• 2002

The structural safety required in general design is to be proved with safety factors provided for structural members in elastic range. But, for the safety requirement in the earthquake resistant design, a specific ductile failure mechanism in plastic range should be verified according to the structural configuration. Therefore such verifications should be done in the preliminary design stage by comparing various design alternatives. In the main design stage only a confirmation of the ductile failure mechanism is required. In this study typical roadway bridges are selected and analysis models are presented for the preliminary and main design. For the two models, vibration periods and mode shapes are compared and the multi-mode spectrum method is applied to determine failure mechanisms. The failure mechanisms obtained with the two models are compared to check the properness of the model used for the preliminary design, which may well be used as an earthquake resistant analysis model in practice.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.103-112
• /
• 1998

The earthquake resistant design for roadway bridges introduced in 1992 is conducted according to the "Standard Specification for Roadway Bridges", Division V, Seismic Design and the first revision of the Standard was done in 1996. However, dur to different concepts of the earthquake resistant design from those of the other designs, the provisions given in the Standard are still not applied appropriately. In this paper the verification of the earthquake resistant capacity of a bridge with typical configurations, 5-span steel box girder bridge, is carried out based on the application rules of the present Standard in order to provide clear understandings about the earthquake resistant verification and the earthquake resistant design as well.n as well.