• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.148-154
• /
• 2012

Purpose: In order to improve road-friendliness of heavy vehicles, a fuzzy hybrid control strategy consisting of a hybrid control strategy and a fuzzy logic control module is proposed. The performance of the proposed strategy should be effectively evaluated using a hardware-in-the-loop (HIL) simulation model of a semi-active suspension system based on the fuzzy hybrid control strategy prior to real vehicle implementations. Methods: A hardware-in-the-loop (HIL) simulation system was synthesized by utilizing a self-developed electronic control unit (ECU), a PCI-1711 multi-functional data acquisition board as well as the previously developed quarter-car simulation model. Road-friendliness of a semi-active suspension system controlled by the proposed control strategy was simulated via the HIL system using Dynamic Load Coefficient (DLC) and Dynamic Load Stress Factor (DLSF) criteria. Results: Compared to a passive suspension, a semi-active suspension system based on the fuzzy hybrid control strategy reduced the DLC and DLSF values. Conclusions: The proposed control strategy of semi-active suspension systems can be employed to improve road-friendliness of road vehicles.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.57-66
• /
• 2017

PURPOSES : This study develops eco-friendly asphalt reinforcement materials applicable to bridge deck pavement. The main purpose is to ensure highly reliable quality applicable to structures and the possibility of practical application. The main target of the study is to develop materials that are environmentally friendly and capable of improving performance. METHODS : The application of double-reinforcement fiber improves the performance of the road pavement. 1. We use recycled film for application of sheet-typed reinforcement. 2. We use preprocessing fibers to reinforce the properties of composite pavement materials. RESULTS : The developed products may produce materials that fit the purpose of achieving stability and environmental friendliness. Sheet-typed reinforcements use more than 50% recycled resin. The most important type of damage to the asphalt layer is deflection (plastic deformation). These products have a very high deflection resistance of not less than 6,000 cycles/mm. In addition, all performance is excellent. Thus, it will be easier to access the field in the future. CONCLUSIONS : Fiber-reinforced asphalt pavement showed excellent performance. Sheet-typed reinforcements containing 50% recycling resin produced good performance in terms of functionality as well as environmental friendliness. Thus, enhancing the field applicability will enhance the usability of the reinforcements.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.742-749
• /
• 2008

In 21th century, high oil price and environmental pollution appeared by serious social problem. It brought important change of logistics environment, and environmentally-friendliness and sustainability are emphasized. In spite of that railroad has high energy efficiency and environmental-friendliness to advantage traditionally, there is still transport division rate of railroad in declining tendency as investment policy that is concentrated on road and insufficiency of social realization about environmental problem. The construction of environment-friendly transport system and the reasonable role sharing between modes of transportation are important. Transportation policy of Korea is presented through plans to constructs efficiently and manages national transportation system. In this study, examine development process of national railroad logistics plan with logistics environment change, and proposes the following ways to development of railroad logistics policy.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2455-2462
• /
• 2008

Global warming has become one of the most important social responsibilities. After Kyoto protocol for greenhouse gas reduction by climatic change convention came into effect, developed countries are presenting various policies to reduce greenhouse gas that is produced in transport field. One of those policies is modal shift that change from road freight to sea, inland waterway and railway transportation that is eco-friendly. Because increase of road freight brings about road congestion and accident, logistics cost, air pollution and green house gases. Railways are superior to all other modes of transport in mass transportability, high speed, timeliness, safety and environmental-friendliness, but the railway industry has been pushed behind in competition. In developed country's government actively promoted relevant legislation, policies, and countermeasures known as modal shift policies to shift freight transport from road to large volume mode such as railway and ship. In this paper, we discuss the current situation in modal shift, compare it with cases in other countries EU and Japan, identify problems in Korea, and propose the following ways to enhance competitiveness of rail freight.

• Design Convergence Study
• /
• v.15 no.5
• /
• pp.199-211
• /
• 2016

The study examined how age-friendly their living environments the aged perceived and it's significant difference depending on their characteristics. The subject were 96 old persons who aged more than 60 years and lived in Nagasaki city, Japan. They asked how far each neighborhood facility related to the aged was located from their houses, and the age-friendliness of walk way, traffic, multi-family houses for the aged, and interior space of their living houses. Data were collected by using one to one interview. Results were as follows: 1) Most neighborhood facilities related to the aged were located within a walking distance or 10 min. distance by bus from their houses. 2) Among 5 areas of living environments, while traffic, house interior, and pedestrians road were relatively age-friendly, the amount of multi-unit dwellings for the elderly and the usability of wheelchair users in house interior were not age-friendly. 3) Age and education level of the aged influenced on the age-friendliness of their living environments.

• Journal of Environmental Impact Assessment
• /
• v.26 no.5
• /
• pp.354-364
• /
• 2017

Considerable amount of resources on roads, basic infrastructure, to promote economic development and distribution of goods is invested. Despite the necessity, its undesirable side effects are various environmental problems In order to efficiently evaluate these problems more than before, planning indictors for environment-friendly road constructions is proposed in this study. First, we make an investigation into real-life cases where the extracted planning indicators were applied. Second, it is suggested that an alternative assessment method efficaciously evaluate and/or adopt extracted planning indictors on road construction projects. Finally, criteria to determine environmental impacts with respect to planning indicators and apply them into real cases is proposed. This study has its significance in upgrading past pro-environmental indictors for road construction, suggesting reasonable applications of planning indicators, and setting criteria to determine environmental impacts based on planning indicators.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.103-110
• /
• 2016

PURPOSES: In this paper, the effectiveness of speed-maintained standardization in road geometry on environmental impact at a downward slope location, based on greenhouse gas (GHG) emission indicators, was studied. Specifically, the aim of this study was to ascertain whether speed-maintained standardization resulted in decreased $CO_2$ emissions as well as noise pollution, due to reduced vehicle speeds. METHODS : In this study, speed-maintained standardization in road geometry was proposed as a means to reduce vehicle speeds, with a view to reducing $CO_2$ emissions and noise pollution. This technique was applied at a downward slope location. The vehicle speeds, $CO_2$ emissions, and noise levels before and after application of speed-maintained standardization were compared. RESULTS: It was found that speed-maintained standardization was effective as a means to reduce speed, as well as $CO_2$ emissions and noise pollution. By applying speed-maintained standardization, it was confirmed that vehicle speeds were reduced consistently. As a result, $CO_2$ emissions and noise levels were decreased by 9% and 11%, respectively. CONCLUSIONS : This study confirmed that speed-maintained standardization in road geometry is effective in reducing vehicle speeds, $CO_2$ emissions, and noise levels. Moreover, there is further scope for the application of this method in the design of roads in urban and rural areas, as well as in the design of highways.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.571-588
• /
• 2011

With the development of the technology, the usage of the car has been increased to the allowed limit of the road and has caused global warming and air pollution. Subway is good transit system with punctuality, safety and eco-friendliness, but it needs relatively much money for construction considering the needs of transit. So it is hard to balance the finance. Many developed countries have adopted advanced transit system including tram for the linking small and medium sized cities after 1980s, due to the relatively low construction cost. This paper reviews the way to increase the role of tram which is planed to be introduced to the local governments as a kind of Advanced transit system.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.109-113
• /
• 2011

The purpose of this study was to examine the potentiality of urban forest roads as an environment for enhancing physical fitness. Six male university students participated in the study as subjects. The subjects walked on an urban forest road for 30 minutes. As a control experiment, they also walked on a national park trail for 30 minutes. Subjects' heart rates were monitored during the walks to calculate the ratio of the average time their heart rates were within the target range (from 60% to 80% of the maximal heart rate) for Enhancing Physical Fitness. After the walks, images of the spaces were analyzed using the semantic differential (SD) method. During the walk on the urban forest road, subjects' heart rates were within the target range 63.3% of the time, and lower than the target range 36.7% of the time. During the control experiment on the national park trail, subjects' heart rates were within the target range only 23.3% of the time, and higher than the target range 76.7% of the time. From the spatial perception evaluation using the SD method, subjects' comfortable and natural feelings when they were on the national park trail were significantly greater than when they were on the urban forest trail, but there were no differences in terms of other SD descriptors, such as friendliness and likeability. The results of our study indicate that the urban forest road provides a good environment for walking to enhance physical fitness. Although not as close to nature as national park trails, urban forest roads offer similar natural environments and have a high potentiality for serving as leisure spaces for urban residents who seek physical activities.

• International Journal of Highway Engineering
• /
• v.2 no.4 s.6
• /
• pp.111-122
• /
• 2000

PMS(Pavement Management System) has been developed and/or operated for the freeway and national highway systems in Korea. There is, however, no municipal PMS that is necessary in many cities for efficient management of their roadways. In this study, a municipal Prototype PMS is developed. The Prototype PMS is designed to be operated on PC base. It uses GIS interface for user friendliness that applies color graphics, text and distress pictures to display pavement conditions and rehabilitation information for both current and historical situations. The computer program of the prototype PMS consists of four major functions(inquiry, analysis, data management, and print). Especially, prioritization and M&R(Maintenance and Rehabilitation) alternative selection procedure is designed to be flexible so that the users can modify the decision criteria whenever it is necessary. Database items of the Prototype PMS is carefully selected for the objectives and size of municipal PMS. Reference point method is basically used for the location referencing in the Database. The unit section consists of each loom segment of the road for effective management.