• 전기학회논문지P
• /
• 제58권1호
• /
• pp.48-55
• /
• 2009

In order to keep safe driving conditions under road networks, there are several formations such as road structure, road surface condition, traffic occupancy and supplement of an accurate information of traffic status ahead To support safe-driving on each road formation, each formation is supplied with various information to help the driver. However, in some cases like rapid status change at local-scale geography, traffic information systems often displays insufficient information because of the lack of information correlation. In order to accurately aware the driver, all road formation must be in sync. It is important to supply accurate information to the driver because this information directly impacts the drivers on the road. This paper discusses the amber information to keep the least safety driving over road formations including tunnels and bridges. This paper also will propose the informations for safe-driving conditions, information linkage on the road and rule-base safety information, as ITS technology, being displayed for all drivers under the worst weather conditions.

• 경영과정보연구
• /
• 제4권
• /
• pp.257-284
• /
• 2000

According as the drivers increase who have their cars, the comprehensive studies on the automobile for the traffic safety have been raised as the important problems. Visual Recognition System for radio-controled driving is a part of the sensor processor of Unmanned Autonomous Vehicle System. When a driver drives his car on an unknown highway or general road, it produces a model from the successively inputted road traffic information. The suggested Recognition System of the Road Traffic Safety Information Board is to recognize and distinguish automatically a Road Traffic Safety Information Board as one of road traffic information. The whole processes of Recognition System of the Road Traffic Safety Information Board suggested in this study are as follows. We took the photographs of Road Traffic Safety Information Board with a digital camera in order to get an image and normalize bitmap image file with a size of $200{\times}200$ byte with Photo Shop 5.0. The existing True Color is made up the color data of sixteen million kinds. We changed it with 256 Color, because it has large capacity, and spend much time on calculating. We have practiced works of 30 times with erosion and dilation algorithm to remove unnecessary images. We drawing out original image with the Region Splitting Technique as a kind of segmentation. We made three kinds of grouping(Attention Information Board, Prohibit Information Board, and Introduction Information Board) by RYB( Red, Yellow, Blue) color segmentation. We minimized the image size of board, direction, and the influence of rounding. We also minimized the Influence according to position. and the brightness of light and darkness with Eigen Vector and Eigen Value. The data sampling this feature value appeared after building the learning Code Book Database. The suggested Recognition System of the Road Traffic Safety Information Board firstly distinguished three kinds of groups in the database of learning Code Book, and suggested in order to recognize after comparing and judging the board want to recognize within the same group with Nearest Neighborhood Decision Making.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.471-474
• /
• 2007

On the road, geometric structure such as horizontal alignment, vortical alignment and crossing inclination ate important to explain characteristics of road and safety analysis. Especially, horizontal and vortical alignment are have to do with safety of covering. In existing road, for the safety analysis or alignment improvement and expansion pavement, it needs alignment factor of road. Alignment factor of road can be acquired by design drawing. But, design drawing can be not exist because of rack of facility management and national policy that centered to construction. And also, existing design drawing have a lot of differences in comparison with another existing design drawing cause of alignment improvement. In this case, for the precise analysis of alignment, 3-dimensional location information on the road centerline and acquisition of location information which related geometric structure are must to be preceded. In this study, therefore, it provide alignment factors which needed to alignment improvement and road safety analysis by acquisition of road space information and extraction of road centerline data using LiDAR data.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.47-56
• /
• 2015

PURPOSES: The purpose of this study is to estimate the impact of variable message signage (VMS) on traffic safety as a function of road curve radius using statistical methods. METHODS: In order to analyze the impact of VMS installations on traffic safety, travel speed, lateral distance, and geometric data relating to road curvature in each study area was acquired and analyzed for the impact of providing VMS information on driver performance and traffic safety using statistical methods including student t-test, Mann-Whitney test, and the Anderson-Darling test for estimating traffic safety hazard zone in each lane. RESULTS: As a result of analyzing driver performance characteristics before and after providing VMS information, it was determined that by providing VMS information, mean travel speed is deceased and vehicles are driven with increased precision, following the centerline in the first and second lanes. Also the results of analyzing traffic safety impacts of VMS indicate that traffic safety performance factors in the first lane of the Gapyeong section can, on average, increase in the left and right side of the lane by 19.22% and 68.98%, respectively, and in the case of the second lane, safety impacts, on average, can increase in both sides by 100%. For the Hongcheon section, traffic safety impacts in the first lane, on average, can increase along the left and right sides of the lane by 32.31% and 47.18%, and within the second lane, traffic safety can be increased along the left and right side of the lane by 10.97% and -0.01%, respectively. CONCLUSIONS: Based on the results of this study, the impact on traffic safety obtained by providing VMS information for road sections with smaller curve radii is greater than can be obtained for road sections with larger curve radii.

• 한국통신학회논문지
• /
• 제35권3B호
• /
• pp.485-492
• /
• 2010

지능형 교통 시스템에는 도로 환경 정보 제공, 차량 근거리 네트워크 연동, 추돌사고예방 및 보행자 안전 제공 등의 다양한 분야의 연구가 진행되고 있다. 이와 관련하여 운전자 및 보행자 안전을 위한 감지 정확도, 정보 신뢰성, 유지보수 편의성을 기초하는 USN 기술이 주목 받고 있다. 본 연구는 다양한 센서를 이용하여 USN을 도로에 구축하고 개발된 도로기지국(RSU)과 연동하여 실시간 도로 환경 정보 수집하고 차량단말기(OBU) 및 교통 센터에 제공하는 Road Weather Information System을 개발하였다. RSU는 운전자 안전을 위해 노변 정보를 수집하고 이를 분석하여 서비스 우선순위에 따라 IP와 비콘 서비스를 OBU 및 상위 터미널에 제공한다. 상위 터미널에는 IP 기반 셋톱박스 응용 프로그램을 개발하여 교통 정보 및 도로 환경 정보, 환경 센서 오류 등에 정보를 제공한다. 결과적으로, RWIS는 노변 정보의 실시간 수집을 발전시켜 지능형 교통 시스템에 운전자 안전을 보완하고, 기술융합으로 다양한 서비스 방법을 제시하였다.

• 대한임베디드공학회논문지
• /
• 제17권3호
• /
• pp.149-155
• /
• 2022

This paper proposes a method for estimating the road surface condition and tilt angle using an inertial measurement unit (IMU) to improve the safety in the use of mobility aids for the elderly. The measurements of the accelerometers of the IMU usually include the accelerations caused by not only the gravitational force but also linear and rotational motions. Thus, the gravitational accelerations are first extracted using several physical constraints and then incorporated into the Kalman filter to estimate the tilt angle. In addition, because the magnitudes of the accelerations produced by the rotational motions (roll and pitch motions) vary with the road surface condition, a criterion based on such accelerations is presented to classify the condition of the road surface. The obtained road surface condition and tilt angle are finally combined to provide the safety information (e.g., safe, warning, and danger) for the user to improve the walking safety. Experiments were carried out and the results showed that the proposed method can provide the condition of the road surface, the tilt of the road surface, and the safety information correctly.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.91-98
• /
• 2014

PURPOSES : This study is to develop a automate road mapping system using ARASEO(Automated Road Analysis and Safety Evaluation TOol) for road management. METHODS : The road survey van named ARASEO(Automated Road Analysis and Safety Evaluation TOol) was used to generate highway drawings for Korea National Road number 37 automatically. In order to generate the highway drawings for purpose of road management, it is required to acquired the information for highway alignment, road width and road facilities such as safety barrier and road sign. Therefore the survey van acquired and analyzed the road width, median and guardrail data using rear side laser sensor of ARASEO and recognized the traffic control sign and chevron sign using foreside camera images. Also the highway alignment which is the basic information for highway drawing can be analyzed by acquisition the every 1m positional and attitude data using GPU and IMU sensor and developed algorithm. Finally, in this research the CAD based drawing software was developed to draw highway drawing using the analysis result from ARASEO. RESULTS : This study showed the comparison result of the surveyed road width and drawing data. To make the drawing of the road, we made the Autocad ARX program witch run in CAD menu interface. CONCLUSIONS : Using this program we can create the road center line, every 500m horizontal and vertical ground plan drawing automatically.

• 스마트미디어저널
• /
• 제12권11호
• /
• pp.95-102
• /
• 2023

Road accidents not only caused loss of human lives but also costed 3% of gross domestic product in most of the countries. The road accidents pose significant challenges to public safety and urban transportation management. There is a need to identify the high-risk area of accidents along with the critical day of week and vulnerable time period in order to implement effective preventive measures and optimizing the resource allocation. We collected 5,012 accident data from 대구교통종합정보. This study identified the high-risk locations, days of week, and time periods for accidents in Daegu and estimated the conditional probabilities of accidents occurring based on combinations of location, day of the week, and time period. The result is visualized in the form of dashboard in Tableau. This study holds substantial practical significance for urban planners, transportation authorities, and policymakers in Daegu to strategically allocate resources for traffic management, law enforcement, and targeted safety campaigns.

• 대한공간정보학회지
• /
• 제20권2호
• /
• pp.31-37
• /
• 2012

도로의 확장 및 신규 도로의 설치로 인하여 도로교통시설물의 변경 및 신규설치는 매년 꾸준히 증가하고 있다. 또한, 자동차 및 운전자의 증가와 함께 교통안전을 위한 도로 및 교통안전표지는 지속적인 증설과 관리가 요구된다. 도로 시설물 중 교통안전표지판을 신속하게 갱신하기 위하여 본 연구에서는 교통안전표지판에 대하여 자동인식기능을 개발하고 위치정확도를 분석하여 수치지형도의 도로시설물 효율적 갱신방안 제시를 목적으로 하였다. 이를 위하여 좌표측정을 위한 전방위 카메라 표정요소 산출, GPS/IMU/DMI 통합시스템 구축 및 영상처리기법을 적용하여 수치지형도의 도로시설물 DB의 효율적 갱신방법을 제시하였다.

• 한국지리정보학회지
• /
• 제11권3호
• /
• pp.68-79
• /
• 2008

한국건설기술연구원(KICT)에서는 도로의 안전성 분석을 위해서 도로의 각종 정보를 이동하는 차량을 이용하여 신속하게 취득하고, 이를 토대로 도로의 결함구간을 분석할 수 있는 도로 안전성 조사 분석 차량(RoSSAV, Road Safety Survey and Analysis Vehicle)을 개발하였다. 본 연구를 통해 도로의 안전성에 의심이 되는 지역에 대해서 3차원 도로 모델링을 통한 도로 선형 결함 알고리즘을 개발하였으며, 이를 위해서는 신속하고 정확한 데이터가 수집되어야 한다. 차량에 회전식 레이저 스캐너, GPS(Global Positioning System), INS(Inertial Navigation System), CCD(Charge-Coupled Device) 카메라 그리고 DMI(Distance Measuring Instrument) 등 여러 센서를 장착하여 데이터를 취득하였다. 마지막으로 이들 데이터를 통합하여 3차원 도로 기하(도로 중심선, 도로 경계선), 도로 시설물과 사면을 추출하였다.