• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.199-204
• /
• 2010

Noise map is very efficient tool to evaluate the road traffic noise. However, calculation time and accuracy of noise map heavily depend on the grid size of noise map. In this study, effects of grid size on the prediction results of road traffic noise map have been investigated in detail for urban and rural areas, respectively, and efficient grid size for the noise map has been proposed.

• 정보처리학회논문지D
• /
• 제9D권6호
• /
• pp.1083-1090
• /
• 2002

소프트웨어개발방법론은 급변하는 정보기술변화에 따라가지 못한다. 대부분의 소프트웨어 개발 프로젝트는 구조적 또는 정보공학 방법론을 사용한다. 기존 소프트웨어 개발 방법론이 프로젝트에 적용할 기술이 반영이 안되어 있다면, 프로젝트는 비효율적으로 수행되어진다. 본 논문은 새로운 정보기술을 기존의 구조적 또는 정보공학 방법론에 용이하게 반영하여 개선하는 모델을 제안한다. 본 모델은 소프트웨어 생명주기를 단계들로 나누고 각 단계는 관점 영역으로 나누어 분할된 작은 영역에 새로 적용할 정보기술을 반영하는 분할과 정복 기법을 활용한다. 적용사례는 설계단계를 중심으로 KCC 정보통신(주)에서 사용한 클라이언트 서버 방법론 CS@RoadMap에 웹 기반 소프트웨어 개발절차를 반영하였다. CS@RoadMap방법론에 웹 기술을 반영한 Web@RoadMap방법론을 공공 프로젝트에 적용하였다.

• 한국환경과학회지
• /
• 제16권7호
• /
• pp.823-830
• /
• 2007

Traffic noise is a kind of noise caused by cars, trains and aircraft. Among them, noise produced by cars is the most important factor in cities. According to the National Institute of Environmental Research(NIER)'s survey, Road traffic noise levels in Susan are the highest of all the cities in Korea. So, appropriate measures for road traffic noise reduction is required. For this purpose, the construction of a noise map in Susan will playa vital role. However, road traffic noise formulas are constructed considering regional characteristics such as each country road's environment and vehicle quality. Therefore, prior to constructing a noise map in Susan, examination processes about each formula constituent status and estimation process are required preferentially. In this research, the basic first stage is to estimate Susan's road traffic noise. First, investigate characteristics of each road traffic noise estimate and using this, a noise map is constructed for road traffic noise in Susan. Then the adaptation of a road traffic noise formula is evaluated.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.515-520
• /
• 2010

The noise map has been applied to predicting the effect of noise and establishing the noise abatement measure for several years overseas. However the introduction of the noise map in Korea is at the initial stage. Thus, we surveyed the several prediction models for road traffic noise used in EU, and the method of applying the noise map in noise impact assessment. In order to improve the noise impact assessment we have to apply the noise map, and propose the guideline of predicting the road traffic noise. We intend to obtain coherency and accuracy of prediction results. As a result of this study, we know that the prediction guideline is an essential prerequisite in order to predict the unified and accurate road traffic noise.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.285-299
• /
• 2018

Recently much attention in building smart factory has been dramatically increased. Despite the growing interest in smart factory, few practical guidelines exist how to successfully build smart factory. The purpose of this study is to postulate and develop a road map for building successful smart factory. To enhance mundane realism, we design the road map through University-Industry research collaboration. Specifically, drawing analysis of University-Industry research collaboration, we design a prototype and detailed road map or building successful smart factory. Moreover, we apply the road map into actual smart factory development. By doing so, we successfully prove the effectiveness of the road map. Therefore, this study provides the valuable guidelines and directions to build a successful smart factory. Ultimately this study is able to help a variety of factories which establish and implement smart factory. Further, we hope that this study will be placed to be an important foundation research on behalf of smart factory building.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1075-1082
• /
• 2009

Using GIS data of C-si as basic data when making noise map of road traffic, we estimated exactly the noise excess areas and consequently suggested the population and the area exposed to road traffic noise accurately. We made 3D noise map to assess regional distribution of noise quantitatively. The noise map consists of noise prediction model based on data base such as traffic volume and speed changes for estimating quantitatively the noise and 3D urban space model which includes locations of noise sources, 3D buildings, topography and roads. We made noise standard map according to land use conditions and compared this map to road traffic noise map, and consequently made excess noise map. Using excess noise map, we assessed areas which exceed environmental noise level standards and noise guidelines quantitatively and effectively through GIS spatial analysis, and consequently more accurate noise exposed area and noise exposed population could be estimated. To show buildings' outer walls noise exposure, we analyzed 3D urban noise distributions using 3D-analysis of GIS.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.301-303
• /
• 2003

The extraction of 3D road network from high-resolution aerial images is still one of the current challenges in digital photogrammetry and computer vision. For many years, there are many researcher groups working for this task, but unt il now, there are no papers for doing this with TLS (Three linear scanner), which has been developed for the past several years, and has very high-resolution (about 3 cm in ground resolution). In this paper, we present a methodology of road extraction from high-resolution digital imagery taken over urban areas using this modern photogrammetry’s scanner (TLS). The key features of the approach are: (1) Because of high resolution of TLS image, our extraction method is especially designed for constructing 3D road map for next -generation digital navigation map; (2) for extracting road, we use the global context of the intensity variations associated with different features of road (i.e. zebra line and center line), prior to any local edge. So extraction can become comparatively easy, because we can use different special edge detector according different features. The results achieved with our approach show that it is possible and economic to extract 3D road data from Three Linear Scanner to construct next -generation digital navigation road map.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2004년도 추계 학술대회 논문집
• /
• pp.65-70
• /
• 2004

This study is to improve location Precision of forest road map which is base of forest road management. The forest road map is constructed using satellite imagery data and GPS route survey, and compared with existing FGIS digital forest road map. And we proposed application of LiDAR data for extracting forest roads.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.97-103
• /
• 2005

Most car navigation systems(CNS) estimate the vehicle's location using global positioning system(GPS) or dead reckoning(DR) system. However, the estimated location has undesirable errors because of various noise sources such as unpredictable GPS noises. As a result, the measured position is not lying on the road, although the vehicle is known to be restricted on the road network. The purpose of map matching is to locate the vehicle's position on the road network where the vehicle is most likely to be positioned. In this paper, we analyze some general map matching algorithms first. Then, we propose a map matching method using compensation vectors to improve the performance of map matching. The proposed method calculates a compensation vector from the discrepancy between a measured position and an estimated position. The compensation vector and a newly measured position are to be used to determine the next estimation. To show the performance improvement of the map matching using compensation vectors, the real time map matching experiments are performed. The real road experiments demonstrate the effectiveness and applicability of the proposed map matching.

• Spatial Information Research
• /
• 제20권4호
• /
• pp.29-36
• /
• 2012

최근 도시와 도시간의 물류량 증가로 인하여 교통혼잡비용이 증가하고, 기후변화협약에 따른 이산화탄소 감축이 의무화됨에 따라 저탄소 화물운송체계 개념이 소개되었다. 연료소비량 및 탄소배출량을 고려한 화물운송계획을 수립하기 위해서는 현실의 도로 기하정보를 표현하는 3차원 도로망도가 필수적이다. 본 연구는 화물운송의 주요대상인 도시와 도시간의 간선도로를 중심으로 지형 및 도로구조물을 고려하기 위하여 기존 2차원 교통주제도와 수치표고모델을 이용하여 도로의 실제 기하정보를 반영하는 3차원 도로망도 모델을 제안한다. 제안 모델은 실험 도로구간(평택항-의왕IC)을 대상으로 구축하고 GPS/INS 측량을 통해 구축한 3차원 도로망도가 도로의 기하정보를 잘 표현함을 검증하였다(RMSE=0.87m). 또한, 연료소모량 시뮬레이션을 통해 기존의 2차원 도로망도에 비해 제안모델이 현실도로의 연료소모량을 효과적으로 반영함을 알 수 있었다. 본 연구를 통해 복잡한 도로의 3차원 기하정보를 반영하여 에너지 및 환경문제를 효과적으로 고려할 수 있는 Green-ITS기반의 화물 경로계획 및 네비게이션 시스템 개발이 가능할 것이다.