• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.65-75
• /
• 2023

Recycled concrete aggregate (RCA) is widely used as a construction material in road construction, concrete structures, embankments, etc. However, it has been reported that calcite (CaCO₃) precipitation from RCA can be a cause of clogging when used in drainage applications. An accelerated calcite precipitation (ACP) procedure has been devised to evaluate the long-term geochemical performance of RCA in subsurface drainage systems. While the ACP procedure was useful for the French Drain application, there remained opportunities for improvement. In this study, key factors that control the formation of calcite precipitation were quantitatively evaluated, and the results were used to improve the current prototype ACP method. A laboratory parametric study was carried out by investigating the effects of reaction temperature and time on the formation of calcite precipitation of RCA, with determining an optimum reaction temperature and time which maximizes calcite precipitation. The improved ACP procedure was then applied to RCA samples that were graded for Type I Underdrain application, to compare the calcite precipitation. Two key findings are (1) that calcite precipitation can be maximized with the optimum heating temperature (75℃) and time (17 hours), and (2) the potential for calcite precipitation from RCA is not as significant as for limestone. With the improved ACP procedure, the total amount of calcite precipitation from RCAs within the life cycle of a drain system can be determined when RCAs from different sources are used as pipe backfill materials in a drain system.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.399-402
• /
• 2007

This project is the 1st. stage for the foreshore reclamation at Jang-Hang area and its scope is to construct a seawall as outer facilities, road adjacent to the seawall and drainage gate. for the safe protections of the facilities at the reclaimed land hereafter, we adopted the mild slope rubble mound type for the seawall structure which was excellent in interrupting the wave overtopping, as a result of numerical & hydraulic model test about alternative 4 sections. For the flooding prevention of the reclaimed land, we planned the drainage system that could make the flood water level lower than the reclaimed land level. Also, we planned the eco-friendly waterfront area with 8 nature themes through the whole seawall sections.

• 한국환경과학회지
• /
• 제18권9호
• /
• pp.1057-1063
• /
• 2009

Since Jeju island has depended a water resource on the underground water because of a poor development of the surface flow, Jeju island is in need of the surface resource development to prevent the future shortage of the underground water due to excessive development and use of it. The study shows that the SWAT model(continuous rainfall-runoff model) is applied to estimate the outflow in the drainage watershed area, where it has been urbanized through the change of the land, such as a tourism development, cultivation, housing, and impervious layer road development. Near Oaedo watershed area in Jeju island, weather and topographical SWAT input data were collected, and compared the outflow change of past and present.

• 한국관개배수논문집
• /
• 제13권1호
• /
• pp.50-62
• /
• 2006

In order to improve areas lagged behind well-developed others ing the balanced national development. Development Promotion Areas(DPA)was designated in 1996. This study aims to develop a rational evaluation system for projects of DPA. This system has 3 evaluation steps. The first step is to evaluate 10-unit operations which are tourism, recreation, road, water supply and drainage, life environment, and so on. The second step is to evaluate 3 sub-programs such as tourism and recreation, local infrastructures and specialized industry. The third step is to evaluate comprehensively in entire area. A tentative system for project evaluation of DPA was proposed by brainstorming of expert-group. Weighting values of items in PDA were calculated through pair-comparison works of expert group using stepwise matrix sheets by AHP(Analytic Hierarchy Process).

• 한국지반신소재학회논문집
• /
• 제20권3호
• /
• pp.1-10
• /
• 2021

본 연구는 성토구조체 현장실험을 통해 포항 지역의 제3기 이암을 도로 노체 재료로 활용하기 위한 가능성을 검토하는 제시하는 것이다. 이 이암은 신생대 제 3기층인 연암퇴적층에 분포하고 있는 미고결화 암석으로 슬레이킹, 팽윤 현상, 전단강도 저하와 같은 물리적 문제와 산성배수라는 화학적 문제가 발생한다. 여러 복합적 문제 해결하기 위해 실내 배합 시험을 진행하였으며 제 3기 이암(90%)과 복합슬래그(제강 70%, 고로 30%)와 중화·코팅제 처리의 최적 배합 조건을 도출했으며, 이를 실증하기 위해 실제 규모의 도로 성토구조체를 시공하여 구간별 현장 시험을 진행했다. 사전처리구간은 최적 배합 조건 설계로 인해 안정이 유지되는 반면, 무처리구간은 자연 풍화가 빠르게 진행되어 구조적 문제 발생이 우려되었으며, 가적치구간은 중화·코팅제 효과가 확인됨에 따라 임시 적치 시기에 적용 가능함을 확인했다.

• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.143-151
• /
• 2017

최근 기후변화에 대응하기 위해 새롭게 체결된 파리협정에 따라 우리나라는 2030년까지 기준대비 37%의 탄소배출량 감축목표를 제시하였다. 이를 위해 28개 산업분류에서 3번째로 많은 이산화탄소를 배출하는 건설산업에서 보다 적극적인 연구가 필요하다. 본 연구에서는 기존의 완공된 국도건설사례들 중 터널과 교량을 제외한 도로분야만을 이용하여 전과정평가(LCA)를 실시하여 환경부하량을 산출 하였다. 산출된 환경부 하량을 기반으로 대공종의 대표공종을 선정한 결과 토공, 배수공, 포장공이 전체의 84%를 차지하였으며, 세부공종별 대표공종을 선정하여 각 세부공종별 환경부하량 특성을 분석하였다. 국도건설공사 시 환경부하량 공종별 배출특성을 이용한다면 환경부하량을 기반으로 하는 친환경적인 국도건설공사 의사결정에 도움이 될 것이다.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.39-48
• /
• 2000

This work was completed in partial fulfillment of an on-going research ot descover the effective management of urban nonpoint sources. The current data was obtained from the area of Shingal, Kyunni-do. The investigation was are predominant soures of storm-runoff load and drainage. As a result of the investigation, the road was found to be most seriously contaminated and a significant potential source deteriorating the quality of streams and lakes in the vicinity of the town. Thus, in could be concluded that an effective and systematic cleaning technique must be developed as soon as possible and be frequently applied to the road.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1597-1601
• /
• 2007

본 연구는 도로배수 유역 현황조사에 의해 유역의 적정 크기 등을 고려하여 산지유역인 상지대 섬강 시험유역 내에 도로배수 소유역을 선정하여 운영하였다. 2005년 5월부터 현재까지 수위관측소와 우량관측소를 설치하여 수위 및 우량자료를 수집하고, 홍수기뿐만 아니라 평 갈수기에도 주기적으로 유량 관측을 통해 수위-유량 곡선을 개발하였다. 도로배수유역의 강우-유출특성을 분석하기위하여 도달시간을 산정하였고, HEC-1 모형을 이용한 모의결과를 실측자료와 비교분석을 실시하여 모형의 사용성을 검토하였다.

• 한국관개배수논문집
• /
• 제21권1호
• /
• pp.109-117
• /
• 2014

Multi water-loop system is the efficient customer centered facilities of water supply by utilizing the multi water resources. Multi water-loop system is divided into various types. The system is classified potable and non-potable type. Mostly, the potable type utilizes surface water and ground water. However, the non-potable type utilize the multi water resources, such as rain water, sea water, reclaimed water, etc. Selective intake is possible when characteristics of region, physiographic condition and purpose of use are considered. For instance, downtown type, new-city type, agriculture type, island type are available. For development and application of these multi water-loop system, standardization is needed. For standardization, several methods are given; design principles, selection and composition method of multi water-loop system structure, BIM/GIS application method, safety inspection method. Consequently, a road map of design standardization method can be established. In this road map, there are three parts for the standardization of multi water-loop system. Three parts are the considerations, base material and ways of standardization. Design standardization become close when this road map followed by someone who plan the multi water-loop system. In this way, loop system's development is more efficient and economic. In hereafter research, each type's characteristic will be analysed and standardization methods can be established.

• 한국농공학회지
• /
• 제44권4호
• /
• pp.85-98
• /
• 2002

The purpose of this study is to develop a land use planning model (LUPM) which can be applied to development of rural villages considering their spatial expansion. The LUPM finds out and allocates the new built site required for the improvement of existing villages. in the development of LUPM, CA (cellular automata) and land suitability analysis methods were applied combinedly. The model uses basically numerical data of CIS based on grid data. Agglomerated settlement, as a type of village for simulation, was adopted. Probability of land use change for optimizing development area was calculated by the six criteria: slope. drainage characteristic, direction of slope, as absolute suitability of grid itself, distance from road. distance from stream and distance from the village center, as relative probability by neighborhood cells. Weighting values of these criteria were quantified by AHP (analytic hierarchy process) method, which is one of MCE(multi-criteria evaluation) method. The algorithm of the model was verified by three example villages: an isolation village, a village with horizontal road, and a village with nodal point of cross road