• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.45-54
• /
• 2018

In this study, numerical analysis is performed to determine highly influential factors that increase the possibility of asphalt road collapse due to cavity underneath the road. The considered influence factors on road collapse due to underground cavity were the asphalt layer thickness, the cover depth, the cavity width, and the cavity height. The concentrated load and uniform distributed pressure were applied on the top surface of asphalt pavement layers with different shape of cavity and asphalt thickness. For each analysis case of given cavity and asphalt thickness, failure load was analyzed under displacement controlled condition. Based on the analyzed failure loads, the applicability of the cavity management system developed by Seoul city was evaluated. As a result of the analysis, the effect of cavity height on road collapse was not significant while the other factors considerably influenced road collapse. Consequently, degree of road collapse susceptibility should be classified by failure load rather than by the condition of existing cavity.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.494-505
• /
• 2014

Residential site should have pedestrian road passing through the center of the site just for convenience and safety. However, apartment complexes developed in the past, the sites are just stuck by walls and pedestrian roads are not placed, inhabitans have difficulties for facility use and safety. Therefore, residents solve the problems as follows: they utilize the spaces, between apartment building and the wall, as walking route, and demolish the parts of the wall for connecting sites. In this study, it was thought that pedestrian road could be emplaced at the wall space between sites. For this, a low-rise apartment complex in Gwangju was selected developed in 1990s, and whether the space for pedestrian road was examined. The width from 2.4m to 8.0m could be secured, and there could be placed the pedestrian road at the wall space. However, this study is limited for the possibility of securing space, for the opinion of residents that might be damaged from the pedestrian road did not reviewed.

• Korean Journal of Agricultural Science
• /
• v.42 no.4
• /
• pp.341-346
• /
• 2015

This study was conducted to investigate the awareness tendency of the government employees who manage forest roads about problems of forest road use and how to improve them in the future using surveys. The results show there are more silvicultural operations than harvesting operations using forest roads. The main purpose of using forest roads is to transport workers; however, the road will be used more for harvesting operations in the future. The respondents wanted to be accessibility for forest operations within 200 m from road in both present and future. For silvicultural operations 1-ton vehicle is used at present, and 5-ton vehicles are expected to be used in the future. For harvesting operations 5-ton vehicle is used at present, and 10-ton vehicles are will be used in the future. The roadway width is 3 - 4 m at present, but should be 4 - 4.5 m in the future. The longitudinal gradient of roads is 7 - 10% at present, and will be below 10% in the future. The minimum curve radius of roads is 12 - 15 m at present, and will be 15 - 20 m in the future. The results provide basic data for making future forest road policies.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2017

PURPOSES : With the increasing number of older drivers in an aging society, there is a growing need for research and planning on traffic safety for the older drivers using an improved road geometry design. This study also proposed a modified urban road interchange design, which aims to keep the older drivers away from accident-prone and high-traffic areas of the city. METHODS : In this study, we examined accident data records of older drivers to identify accident-prone zones and intersections; we studied the road geometry at these zones and analyzed if it was an underlying cause for higher number of accidents. Based on the research and subsequent analysis, we suggested plans for improvement of road geometry design at these intersections. RESULTS :By studying historic data and analyzing factors that affect the likelihood of accidents of vehicles driven by older drivers and after studying suitable traffic accident prediction models, we identified the major variables that need to be modified at accident-prone intersections, such as the width of a left turn lane at an intersection and the radius of the right turn lane at a street corner. The results have a significance probability of less than 0.001 and a 95% confidence level. To improve safety at the identified intersection, this study suggests the installation of a left-turn-lane-shaped Positive Offset and a right-turn-lane-shaped Slip Lane concept and an adjustment of intervals between intersections.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.75-86
• /
• 2016

PURPOSES : The purpose of this study is to investigate characteristics of crack spacing and crack width and their relationship in continuously reinforced concrete pavement (CRCP) based on the data obtained from long-term field observations. METHODS : The crack spacings and crack widths are measured periodically over 10 years at two different CRCP sections: one with asphalt bond breaker beneath concrete slab, and the other with bonded lean concrete base beneath concrete slab. The effects of steel ratio, type of underlying layer, terminal treatment method, and seasonal temperature change on the crack characteristics are evaluated by analyzing the measured data. RESULTS : The CRCP with lean concrete base shows smaller crack spacings than those of the CRCP with asphalt bond breaker. As the steel ratio increases, both the crack spacing and crack width tend to decrease. The crack width becomes larger as the crack age increases, but once the crack age is over a certain value the crack width tends to converge. When the terminal anchor lug system is not used and the expansion joints are employed at the terminals, the crack spacings and crack widths increase near the terminal sections. The crack spacing and crack width seem to be proportional each other, but not necessarily linearly, and their relationship is more distinguished in the summer when the crack widths become smaller. CONCLUSIONS : The steel ratio, underlying layer type, terminal treatment method, and seasonal temperature change affect the characteristics of cracks and the crack spacing and crack width are related to each other.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.223-228
• /
• 2011

The initial joint width design of the terminal joint between post-tensioned concrete pavement (PTCP) and jointed concrete pavement (JCP) was studied in this research. The joint width between PTCP and JCP directly affects noise and ride quality. If the initial joint width is very large, noise increases and ride quality decreases. If the initial joint width is very small, on the other hand, under high temperatures, PTCP slabs can blow up, or failures near the joint can occur due to excessive compressive stresses. The terminal joint width behavior between PTCP and JCP near Jumunjin at Donghae expressway under temperature changes was measured in August and November 2010 and the data was analyzed. From this study, the design methodology of the optimal initial terminal joint width was proposed.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.187-193
• /
• 2011

The stormwater runoff from road or expressway is known as one of important nonpoint pollution sources. To reduce the pollutants discharge from road or expressway, many best management practices(BMPs) have been applied and planned. Among the BMPs, road sweeping can be effective way to prevent pollutant washoff to environment. This study is performed to evaluate the characteristics of particles collected from the road by sweeping car. Size distribution and pollutant concentration of particles were analyzed. Based on the pollutant concentration and the specification of road such as length, width, and unit for pollutant generation, total amount of pollutant to be removed by road sweeping was estimated. Most of sediments collected by road sweeping was classified into sandy soil and fraction of fine grained soil was low. Although the concentrations of pollutants such as heavy metals in road sediments did not exceed the soil contamination criteria, washout of pollutants during sweeping work by spraying water might cause leaching of pollutants contained in sediments and thus resulted in low pollutant concentrations. Reduced amounts of pollutant by road sweeping showed 31.4% TSS reduction for ${\bigcirc}{\bigcirc}$ region and 7.7% TSS for ${\triangle}{\triangle}$ region. Other pollutants showed low reduction rate, because of their leaching by water spraying. Results from this study indicate that detailed and well-planned investigation for the road sweeping is necessary for the accurate estimation of pollutant reduction from road or expressway.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.151-158
• /
• 2009

This study deals with the rear-end collisions in the rural aiea. The objectives of this study are 1) to analyze the characteristics of rear-end accidents of signalized intersections, and 2) to develop the accident models for Cheongju-Cheongwon. In pursing the above, this study gives the particular attentions to comparing the characters of urban and rural area. In this study, the dependent variables are the number of accidents and value of EPDO(equivalent property damage only), and independent variables are the traffic volumes and geometric elements. The main results analyzed are the followings. First, the statistical analyses show that the Poisson accident model using the number of accident as a dependant variable are statistically significant and the negative binomial accident model using the value of EPDO are statistically significant. Second, the independent variables of Poisson model are analyzed to be the ratio of high-occupancy vehicles, total traffic volume and the sum of exit/entry, and those of negative binomial regression are the main road width, total traffic volume and the ratio of high-occupancy vehicles. Finally, the specific independent variables to the rural area are the main road width, the ratio of high occupancy vehicle, and the sum exit/entry.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.43-60
• /
• 1988

This study was carried out to determine traffic noise level and analyze noise reduction effects of various sound protection facilities in the area of Seoul, Inch'on, Songchoo and Seoul- Busan Expressway from March to Octover, 1987. The results were as follows; 1. As compared with the environmental standards and the traffic noise level in heavy noise areas, traffic noise levels observed were shown in higher than environmental standards. The noise levels in Seoul were determined at 12.8-18.2 dB(A) in daytime and 19.0-26.9 dB (A) in nighttime. And incase of inch'on, it were 6.7-9.6 dB(A) in daytime, 7.9-18.9 dB(A) in nighttime, respectively. 2. The environmental noise level observed in the backside of protection facilities, such as apartment, soundproof barrier and houses, which were constructed in paralled to the road was lower about 3-5 dB(A) than perpendicular to theroad. Noise recuction effect of upper stairs in apartment was higher than lower stairs. 3. The predicted noise level obtained from the equation $({\triangle}L\;=\; -10\;log\;(^{I'1}/Ii)\;was\;\pm\;1dB$ (A) and the correlation coefficient (r) was 0.923. 4. The noise reduction effect in backside of apartment was measured at on sites and predicted by total noise loss equation. The predicted noise level was 60.9 dB(A) and the measured level was 60.6 dB(A), respectively. 5. The narrow width landscape less than 10m width was almost no effect for the protection of traffic noise. According to the synthesis of the above results, the noise level of the road was exceeding mostly the environmental standard in the heavy traffic areas. The counterplan should be set as well. The insulation of noise protection facilities were effective by the location with near distance from the road edge. The reduction effect of double window in apartment was represented so much. The prediction model could be applied to estimate the noise levels in the roadside as well as the effectiveness for the noise protection facilities.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.400-409
• /
• 1994

To investigate the noise attenuation effects of various vegetation configurations, noise levels on 6 study sites along relatively heavy traffic roads were measured. The differences between noise level measures at 1m and 10m spots from the road range from 10 to 15dB depending upon the attributes of the vegetation. When flat grass land was set to control plot, the maximum noise attenuation at 10m spot was measured at the densely planted shrubs with 5dB difference. The areas on upward slope from the road showed the least attenuation effects. Based on the study results, an appropriate setting for low level residential area noise buffer belt would be densely planted shrubs with at least 3m width and 2m height. To be effective, 3m width soft areas covered with grasses are needed at the front and behind sides of the belt. More than 15dB of the noise level caused by the road traffic would be attenuated with the prescription.