• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.111-116
• /
• 2013

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The objective of this paper is to propose ANC(active noise cancellation)-based road traffic noise reduction algorithm-model which can reduce noise by generating frequency opposed to noise sources to improve and complement the problem that existing physical form of a noise barrier. In this paper, we measured the noise characteristic from collection of two difference car noise also ANC simulation has been performed by using road traffic noises input. In order to compare the control performance, we performed noise reduction simulation of ANC by filtered-X LMS algorithm and delayed control signal injection. As a result of this simulation, we confirmed that convergence performance and noise decrease effect to the filtered-X LMS algorithm by inputting the road traffic noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.581-588
• /
• 2002

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels omitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured Korea highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of Korea highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power show little difference within 1 dB.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2009

In this study, computer simulation program was using to identify the effects of road traffic noise propagation depending on the road types which are very variable in dense city. To achieve this goal, the roads should adjacent to housing complex were categorized into 7 types and propagation noise level should predicted then after simulation of noise exposure population calculation are carried out. Followings the results. First, the road types producing the higher noise level are R1, R2, R3 and R7. The lowest one is R6. And R4, R5 showed that some amount of noise level reduction. Second. the R6 road type which is tunnel shaped showed the highest noise level reduction in vertical distance gap. Last, the order of noise exposure population ratio is R1>R2>R7 and R6 showed the lowest.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.284-290
• /
• 2015

Road traffic noise is closely related with urban forms and urban components, such as population, building, traffic and land-use, etc. Hence, it is possible to minimize the noise exposure problem depending on how to plan new town or urban planning alteration. This paper provides ways to apply for urban planning in consideration of noise exposure through road traffic noise estimation for alteration of small-scale urban form. Spatial autoregressive model from the former study is used as statistical model for noise simulation. The simulation results by the spatial statistical model are compared with those by the engineering program-based modeling for 5 scenarios of small-scale urban form alteration. The error from the limitation of containing informations inside the grid cell and the difficulties of reflecting acoustic phenomena exists. Nevertheless, in the stage of preliminary design, the use of the statistical models that have been estimated well could be useful in time and economically.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.709-714
• /
• 2008

The various computer programs are used in computer simulation of the traffic noise prediction. But the difference or problem of calculation method used for road traffic noise prediction is not exactly investigated. In this paper, Road traffic noise is predicted on the specific regions by using four prediction methods such as XPS31-133 model(France), RLS-90 model(Germany), ASJ RTN model(Japan) and FHWA model(U.S.A.), which are operated by a program named SoundPLAN, a program to predict road traffic noise. Those prediction values are compared with a measurement value. The results show that four prediction values for taraffic noise are a little different, because of various input factors according to the prediction methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1273-1279
• /
• 2001

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels emitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured domestic highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power shows little difference within 1 dB.

• Journal of Environmental Impact Assessment
• /
• v.17 no.4
• /
• pp.213-224
• /
• 2008

Since 1970's rapid urbanization and economic growth, the population was highly increased and residential type was changed from single detached house to high density and high-rise apartment. Recently more high-rise residential building generates more traffic volumes and it makes spatial concentration. The highly traffic volumed road and high residential building was constructed nearby, it occurs noise problem. The purpose of this study is comparing the performance of three type noise barrier between noise source and receiver using a noise map simulation. Three types were composed as road side planting trees, building side planting trees and noise barrier wall. Planting trees is less effective than noise barrier wall as a noise barrier. And they are all effective under 3 stories than over 5 stories, especially noise barrier function can't work over 5 stories.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.49-56
• /
• 2016

PURPOSES : In this study, noise reduction effect of a two-layer porous asphalt pavement was investigated through site measurement and computer simulation. METHODS : To examine noise reduction effect, a 3 km long quiet pavement was installed by removing previous normal pavement, which had a rather low porosity. The studied site was a high-rise apartment building surrounded by the quiet pavement and Seoul ring road with heavy traffic volume, indicating relatively high background noise. RESULTS : The measurement result before and after installing the quiet pavement showed a noise reduction effect of 4.3 dB(A) at a distance of 7.5 m from the road. After validating the accuracy of simulation using SoundPLAN, the reduction in SPL(sound pressure level) at the facades by the quiet pavement was predicted by considering five different road conditions generating traffic noise from each road or in the combination of the quiet pavement and Seoul ring road. In the case of no noise from Seoul ring road, noise reduction at the facades was 4.2 dB(A) on average for 702 housing units. With background noise from Seoul ring road, however, the average SPL decreased to 2.0 dB(A). Regarding subjective response of noise, the number of housing units with a noise reduction of over 3 dB(A) was 229 out of 706 units (approximately 32%). For 77 housing units, the noise reduction was between 1~3 dB(A), while it was less than 1 dB(A) for 400 housing units. CONCLUSIONS : The overall result indicates that the quiet pavement is useful to reduce noise evenly at low and high floors compared to noise barriers, especially in the urban situation where background noise is low.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1040-1044
• /
• 2001

This study is to propose an analyzing method of road traffic noise in apartment sites using computer simulation program. The evaluation method used in this study is to calculate "Site Equivalent Noise Level". It will be possible to set up effective sound proof system with calculation of "The Number of Houses Exceeding Standard Noise Level".

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.199-205
• /
• 2007

In this study, we have intended to precisely analyze the aspect of propagation and the extent of damage due to the traffic noise as hon as a main source of noise in urban area. The propagation of traffic noise has a strong relationship between distance and shape of surface. Thus, it is necessary to consider the distribution of buildings for estimating effects of noise in urban area because noise propagations will be affected by buildings. For this, we developed the DEM and DBM using the airborne LiDAR data in the study area and compared with results from the noise simulations using the each model. The extent of damage occurred by the traffic noise above 60 dB(A) from the case of DEM were shown at the 60% of a whole study area, whereas the extent from other case of DBM were shown at the 30% of a whole study area. Also, the extent of the noise levels between 45 dB(A) and 50 dB(A) will be generally recognized as calm environment was increased(the 0% to the 43%) in the case which simulated with building informations. These results indicated that the shape informations of buildings like a DBM is a essential source to simulate the propagation of traffic noise in urban area especially. With results in this study, the effect of traffic noise at a specific area will be easily and precisely estimated if we have the LiDAR data and a traffic census for Korea. Furthermore specific area's traffic noise simulation could be possible using only road traffic information once we have DBM data from LiDAR surveying. This also could be applied as a base data for noise pollution petitioning, traffic planning, construction, etc. in huge city planning projects like a U-City.